journal article·2024-10

Structure-dependent residual stress of thermal barrier coating on turbine blade with exposure to high temperature

Peng Jiang, Liuyu Yang, Yiwen Chen, Dingjun Li, Xiaoxiang Wang

Publisher page

Abstract

This work aims to investigate the structure-dependent residual stress of thermal barrier coating systems (TBCs) on actual turbine blades with curved surfaces, and explore the relationship between stress and failure in different blade regions. A specialized non-destructive stress measurement setup was developed for this purpose. The residual stresses in the top coat (TC) and thermally grown oxide (TGO) layer at different blade regions, namely the convex surface, the concave surface, and the leading-edge surface, were measured during isothermal oxidation services. A phenomenon of residual stress reversal was discovered. The structure-dependent failures of TBCs in different blade regions were found to be strongly correlated with the residual stress in the TGO layer, rather than the TC layer. These results significantly enhance our understanding of the failure mechanism and contribute to the prediction of service lifetimes for turbine blades equipped with TBCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Thermal barrier coatings for gas-turbine engine applications10.1126/science.1068609 ↗
2. Silicate deposit degradation of engineered coatings in gas turbines: progress toward models and materials solutions10.1146/annurev-matsci-010917-105000 ↗
3. Thermal barrier coatings for aircraft engines: history and directions10.1007/BF02646310 ↗
4. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
5. Failure modes in plasma-sprayed thermal barrier coatings10.1016/S0921-5093(02)00251-4 ↗
6. Progress update on failure mechanisms of advanced thermal barrier coatings: a review10.1016/j.porgcoat.2015.09.019 ↗
7. High temperature structural materials for gas turbines
8. The stresses and cracks in thermal barrier coating system: a review
9. Influence of inhomogeneous thermally grown oxide thickness on residual stress distribution in thermal barrier coating system10.1016/j.ceramint.2018.06.134 ↗
10. Interfacial fracture mechanism associated with mixed oxides growth in thermal barrier coating system10.1016/j.surfcoat.2014.05.026 ↗
11. Mechanisms governing the interfacial delamination of thermal barrier coating system with double ceramic layers10.1016/j.apsusc.2016.02.180 ↗
12. Thermal cycling induced crack nucleation and propagation in thermal barrier coating system10.4028/www.scientific.net/KEM.462-463.383 ↗
13. Oxidation behavior of several chromia forming commercial nickel—base superalloys10.1007/BF02134783 ↗
14. Oxidation behavior of Alloy 718 at a high temperature10.1016/j.matdes.2005.11.020 ↗
15. Effect of high temperature oxidation on inconel 718 and inconel 718/YSZ/Gd2Zr2O710.1088/2053-1591/ab26d8 ↗
16. TGO growth and kinetic study of single and double layered TBC systems10.1016/j.surfcoat.2021.127135 ↗
17. Performance of single YSZ, Gd2Zr2O7 and double-layered YSZ/Gd2Zr2O7 thermal barrier coatings in isothermal oxidation test conditions10.1016/j.vacuum.2020.109401 ↗
18. Comparison of microstructure and oxidation behavior of CoNiCrAlY coatings produced by APS, SSAPS, D-gun, HVOF and CGDS techniques10.1016/j.vacuum.2020.109609 ↗
19. Thermal cycling failure of the multilayer thermal barrier coatings based on LaMgAl11O19/YSZ10.1016/j.jeurceramsoc.2019.12.039 ↗
20. Superposed structure of double-ceramic layer based on YSZ/LaMgAl11O19 thermal barrier coating10.1016/j.ceramint.2022.01.107 ↗
21. Synthesis of rare earth silicate thermal barrier coating materials (YxYb2-xSiO5) and application on the surface of titanium alloy10.1016/j.inoche.2021.109129 ↗
22. Bending-driven failure mechanism and modelling of double-ceramic-layer thermal barrier coating system10.1016/j.ijsolstr.2017.10.024 ↗
23. Competition mechanism of interfacial cracks in thermal barrier coating system10.1016/j.matdes.2017.07.018 ↗
24. Local stress around cap-like portions of anisotropically and nonuniformly grown oxide layer in thermal barrier coating system10.1007/s10853-013-7393-7 ↗
25. Local stress evolution in thermal barrier coating system during isothermal growth of irregular oxide layer10.1016/j.surfcoat.2012.11.052 ↗
26. Three-dimensional X-ray micro-computed tomography of cracks in a furnace cycled air plasma sprayed thermal barrier coating10.1016/j.scriptamat.2014.10.026 ↗
27. Stress state and failure mechanisms of thermal barrier coatings: role of creep in thermally grown oxide
28. Coupled mechanical-oxidation modeling during oxidation of thermal barrier coatings10.1016/j.commatsci.2018.08.017 ↗
29. Sadowski · 2016
30. Monitoring local strain in a thermal barrier coating system under thermal mechanical gas turbine operating conditions10.1007/s11837-015-1399-3 ↗
31. Stress development in alumina scales formed upon oxidation of (111) NiAl single crystals10.1016/S0010-938X(97)83344-6 ↗
32. Thermally grown oxide growth behavior and spallation lives of solution precursor plasma spray thermal barrier coatings10.1016/j.surfcoat.2007.07.055 ↗
33. Microstructural evolution and failure characteristics of a NiCoCrAlY bond coat in "hot spot" cyclic oxidation10.1016/j.actamat.2009.04.039 ↗
34. Thermal-cycle dependent residual stress within the crack-susceptible zone in thermal barrier coating system10.1111/jace.15699 ↗
35. Local residual stress evolution of highly irregular thermally grown oxide layer in thermal barrier coatings10.1016/j.ceramint.2020.12.220 ↗
36. Nondestructive measurements of residual stress in air plasma-sprayed thermal barrier coatings10.1111/jace.17550 ↗
37. Measurement of residual stress in air plasma-sprayed Y2O3-ZrO2 thermal barrier coating system using micro-Raman spectroscopy10.1016/j.msea.2005.12.034 ↗
38. Damage quantification in TBCs by photo-stimulated luminescence spectroscopy10.1016/S0257-8972(01)01455-4 ↗
39. Residual stress in air-plasma-sprayed thermal barrier coatings under long-term high-temperature oxidation10.1016/j.surfcoat.2024.130827 ↗
40. Anisotropic TGO morphology and stress distribution in EB-PVD Y2O3-ZrO2 TBCs after in-phase thermo-mechanical test10.1016/j.surfcoat.2013.10.041 ↗
41. Spallation of thermal barrier coatings with real thermally grown oxide morphology under thermal stress10.1016/j.matdes.2018.03.019 ↗
42. The enhanced thermal shock resistance performance induced by interface effect in blade-level La2Ce2O7/YSZ thermal barrier coating10.1016/j.apsusc.2023.156723 ↗
43. Effect of periodic surface cracks on the interfacial fracture of thermal barrier coating system10.1016/j.apsusc.2012.06.036 ↗
44. Atmospheric plasma sprayed thermal barrier coatings with high segmentation crack densities: spraying process, microstructure and thermal cycling behavior10.1016/j.surfcoat.2011.06.032 ↗
45. Processing science of advanced thermal-barrier systems10.1557/mrs.2012.233 ↗