journal article·2024-10

Effects of Gd3+ and Ga3+ substitution on the local structure and luminescence properties of Y0.97Al3(BO3)4: 0.03Dy3+ single-phase phosphors

Lingbo Zhou, Rujia Chen, Yimin Yang, Xiliang Jiang, Tianqing Zhang, Ming Chang, Zhipeng Zhang, Chun Li, Weiling Yang, Fanming Zeng, Hai Lin, Shasha Li, Lina Liu

Publisher page

Abstract

A series of Y 1-x-yAl 3–3z(BO 3) 4: xDy 3+, yGd 3+ and zGa 3+ single-phase phosphors were prepared by solid-phase technique. Subsequently, the samples were analyzed by Rietveld refinement, SEM, FT-IR and XPS to determine their phases, morphologies, and compositions. The results show that Dy 3+, Gd 3+ and Ga 3+ were successfully doped in YAl 3(BO 3) 4 and the prepared phase was very pure without changing the structure of the initial phase. The emission peaks of Y 1-xAl 3(BO 3) 4: xDy 3+ phosphor at λ ex= 351 nm are 483 nm and 574 nm, which correspond to 4F 9/2 → 6H 15/2 and 6H 13/2 transitions, respectively. Afterwards, the local crystal field environment of Dy 3+ in the luminescence center was improved by replacing Y 3+ with Gd 3+ and Al 3+ with Ga 3+, which enhanced the luminescence. At the peak at 574 nm, the doping of Gd 3+ increased 1.49 times and that of Ga 3+ increased 1.98 times. The internal quantum efficiencies of these two phosphors are as high as 67.23 % and 70.86 %, and the thermal stabilities are 86.7 % and 88.4 %, respectively. We discuss the mechanism of introducing Gd 3+ and Ga 3+ to produce luminescence enhancement from two aspects. On the one hand, the host activity was analyzed and explained by first-principles calculations combined with diffuse reflectance spectroscopy. On the other hand, dipole moments are introduced to control the local aberration parameters. Finally, 365 nm chip was used to package and test Y 0.94Al 3(BO 3) 4: 0.03Dy 3+, 0.03Gd 3+ and Y 0.97Al 2.7(BO 3) 4: 0.03Dy 3+, 0.1Ga 3+ phosphors. The color rendering indices of the samples was 67.4 and 68.1, respectively, and they emitted bright natural white light. The results indicate that the Y 0.94Al 3(BO 3) 4: 0.03Dy 3+, 0.03Gd 3+ and Y 0.97Al 2.7(BO 3) 4: 0.03Dy 3+, 0.1Ga 3+ single-phase phosphors have potential commercial value as W-led devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Luminescence Properties of Advanced Materials · Radiation Detection and Scintillator Technologies · Crystal Structures and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Tunable multicolor luminescence and energy transfer mechanism in Eu3+/ Dy3+ co-doped Ca2Sb2O7 phosphor under UV excitation10.1016/j.optlastec.2022.108029 ↗
2. Tuning of emission by effect of local symmetry in BaLaLiWO6: Dy3+/Eu3+ for WLEDs10.1016/j.ceramint.2022.03.155 ↗
3. Blue emission and color-tunable behavior in Tm3+ singly- and Dy3+/Tm3+ co-doped CaLaGa3O7 phosphors10.1016/j.ceramint.2024.03.240 ↗
4. Synthesis and luminescence properties of double perovskite red-emitting NaSrLaTeO6: Sm3+ phosphors with high thermal stability and color purity for w-LEDs10.1016/j.jlumin.2022.119262 ↗
5. An effective heat dissipation strategy improving efficiency and thermal stability of phosphor-in-glass for high-power WLEDs10.1016/j.ceramint.2022.01.195 ↗
6. Exploring a new Dy3+-activated borotellurate phosphor with thermally stable photoluminescence10.1016/j.jallcom.2022.165837 ↗
7. Thermally-stable and color-tunable novel single phase phosphor Ca2GaTaO6: Dy3+, Sm3+ for indoor lighting applications10.1016/j.ceramint.2024.01.325 ↗
8. Synthesis, optical properties, and packaging of Dy3+ doped Y2WO6, Y2W3O12, and Y6WO12 phosphors10.1016/j.materresbull.2020.110846 ↗
9. A novel single phase La2CaZnO5: Dy3+ phosphor for potential applications in WLED’s, latent fingerprint and cheiloscopy10.1016/j.jlumin.2022.119539 ↗
10. Dy3+/Tm3+ activated single-phase tungstate phosphors with anti-thermal quenching and tunable luminescence properties for white LEDs applications10.1016/j.ceramint.2024.01.318 ↗
11. Modification of local site preference for achieving tunable color emission from blue to near-white in Sr3(PO4)2: Dy3+ phosphor10.1016/j.materresbull.2024.112885 ↗
12. A novel yellow-emitting CaGdSbWO8: Dy3+ single-phase phosphor with high thermal stability and application in w-LEDs10.1016/j.inoche.2022.110316 ↗
13. A single-phase white-emitting La(BO3, PO4): Dy3+ phosphor with high thermostability10.1016/j.ceramint.2022.10.075 ↗
14. Effect of partial substituting Y3+ with Ln3+ (Ln = La, Gd) on photoluminescence enhancement in high-performance Na5Y (MoO4)4: Dy3+ white-emitting phosphors
15. Synthesis and luminescence enhancement of white-emitting Ca9La(VO4)7: Dy3+ phosphors through Gd3+ and Al3+ codoping for white-light-emitting diodes10.1016/j.ceramint.2022.12.173 ↗
16. Spontaneous and stimulated emission in Sm3+-doped YAl3(BO3)4 single crystal10.1016/j.jlumin.2015.06.010 ↗
17. Enhanced quantum efficiency and thermal stability by crystal-field engineering in a Y(Ga, Al)3(BO3)4:Cr3+, Yb3+ phosphor for diverse short-wave infrared applications10.1039/D3TC04702D ↗
18. Characterization, room and low temperature photoluminescence of yttrium aluminium borate activated with Sm3+ ions10.1016/j.materresbull.2023.112167 ↗
19. Unusual heating rates, dose responses and kinetic parameters detected on thermoluminescence from YAl3(BO3)4: Sm3+ phosphors10.1016/j.ceramint.2023.08.038 ↗
20. Flux growth, thermal, and luminescence properties of (Tb3+, Eu3+): GdGa3(BO3)4, multicolor phosphors10.1021/acs.cgd.3c01323 ↗
21. Synthesis of a Sm3+-doped YGa1.5Al1.5(BO3)4 phosphor via a mechanical activation-assistedsolid-state reaction10.1039/D3DT00179B ↗
22. Luminescence properties and energy transfer of YGa1.5Al1.5(BO3)4: Tb3+, Eu3+ as a multi-colour emitting phosphor for WLEDs10.1039/C7TC01285C ↗
23. Structural and temperature-dependent luminescence of Terbium doped YAl3(BO3)4 phosphor synthesized by the combustion method10.1016/j.ceramint.2022.07.167 ↗
24. Realization of broadband near-infrared emission with high thermal stability in YGa3(BO3)4: Cr3+ borate phosphor10.1021/acs.inorgchem.3c02572 ↗
25. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides
26. Enhanced red emission of Yb, Ho: NaYGd(WO4)2 phosphors by codoping Ce3+10.1016/j.jlumin.2021.118432 ↗
27. Synthesis of novel Dy3+ activated Ba2CaZn2Si6O17 phosphors for white light-emitting diodes10.1002/bio.3441 ↗
28. Plant habitat-conscious white light emission of Dy3+ in whitlockite-like phosphates: reduced photosynthesis and inhibition of bloom impediment10.1021/acsami.5b06208 ↗
29. Effects of Eu3+ and Dy3+ doping or co-doping on optical and structural properties of BaB2Si2O8 phosphors for white LED applications10.1016/S1002-0721(14)60573-1 ↗
30. Luminescence and energy transfer of warm white-emitting phosphors Mg2Y2Al2Si2O12: Dy3+, Eu3+ for white LEDs
31. Augmenting the photoluminescence efficiency via enhanced energy-relocation of new white-emanating BaYAlZn3O7: Dy3+ nano-crystalline phosphors for WLEDs10.1016/j.jallcom.2021.160371 ↗
32. Luminescence and photometric characterization of K+ compensated CaMoO4: Dy3+ nanophosphors10.1039/c3dt50780g ↗
33. Effects of Eu3+ concentration on the thermoluminescence properties of narrow-band red-emitting Eu3+: SrLaGaO4 phosphor10.1016/j.jallcom.2023.170507 ↗
34. Bi4BPO10: Dy3+: a single-phase white-emitting phosphor for light-emitting diodes
35. Facile synthesis, novel structure, and tunable luminescence properties of K6Bi13(PO4)15: Dy3+, Eu3+ phosphors for ultraviolet converted white light-emitting diodes10.1016/j.ceramint.2023.03.065 ↗
36. Preparation, structural and luminescent properties of YAl3(BO3)4: Dy3+phosphor for white light-emission under UV excitation10.1016/j.ceramint.2012.09.034 ↗
37. Luminescence enhancement of single-component Ca19Zn2(PO4)14: Dy3+white-emitting phosphor powders through partial substitution of PO43-with SiO44- and BO33-10.1016/j.ceramint.2022.02.261 ↗
38. Surface chemical analysis and white-emitting characterization of dysprosium-activated single-phase lithium sodium borophosphate10.1016/j.jallcom.2020.154809 ↗
39. Anomalous 5D0→7F4 transition of Eu3+-doped BaLaGaO4phosphors for WLEDs and plant growth applications
40. A novel narrow-band blue-emitting phosphor of Bi3+-activated Sr3Lu2Ge3O12 based on a highly symmetrical crystal structure used for WLEDs and FEDs.10.1016/j.cej.2020.126130 ↗
41. Structure and tunable luminescence of Tm3+/Dy3+ doped KBaIn2(PO4)3 phosphors with high thermal stability10.1016/j.jlumin.2022.119291 ↗
42. Garnet structure-activated warm white light phosphors Ca3Al2Ge3O12: Dy3+, Eu3+ with ultrahigh thermal stability and tunable luminescence10.1021/acs.inorgchem.3c03739 ↗
43. Color tunable warm white emitting whitlockite-type phosphors applied in optical thermometry10.1016/j.jlumin.2022.119532 ↗
44. Bismuth activated blue phosphor with high absorption efficiency for white LEDs10.1016/j.jallcom.2021.160960 ↗
45. A high absorption efficiency blue-emitting phosphor NaSrScSi2O7: Eu2+ for near-UV-pumped white light-emitting diodes10.1016/j.jallcom.2022.163815 ↗
46. Synthesis and characterization of a new double perovskite phosphor: NaCaTiTaO6: Dy3+ with high thermal stability for w-LEDs application10.1016/j.optlastec.2022.108347 ↗
47. Double-perovskite structure-driven thermal-stabilized Dy3+-activated yellow-emitting phosphors10.1016/j.jallcom.2023.171701 ↗
48. Sr2Gd8(SiO4)6O2: Ce3+/Mn2+: a single-component white-light-emitting phosphor for UV W-LEDs10.1002/slct.201900206 ↗
49. Layer-structure-suppressed concentration quenching of Dy3+ luminescence and the realization of a single phase white light-emitting phosphor cooperated with Tm3+10.1039/D2QI00830K ↗
50. Crystal structure, luminescence properties and thermal stability of Lu3+ ion-substituted BaY2Si3O10: Dy3+ phosphors10.1016/j.jallcom.2021.162758 ↗
51. A novel single-phase color tunable LiYGeO4: Dy3+, Eu3+ phosphor exhibiting warm white light and excellent thermal stability10.1039/D3CP04754G ↗
52. Energy transfer mechanism and luminescence properties of green phosphors Sr2YF7: Dy3+, Tb3+10.1016/j.jlumin.2024.120438 ↗
53. Debye · 1929
54. Bond-valence parameters for solids10.1107/S0108768190011041 ↗
55. Cation substitution induced highly symmetric crystal structure in cyan-green-emitting Ca2La1-xLuxHf2Al3O12: Ce3+ solid-solution phosphors with enhanced photoluminescence emission and thermal stability: toward full-visible-spectrum white LEDs
56. Effect of partial Ca2+ substitution with Ln3+ (Ln = Y, La) on luminescence enhancement of Ca18.62Zn2(PO4)14: 0.38Dy3+ white-emitting phosphor for white light-emitting diodes10.1021/acsaelm.1c00622 ↗
57. A white-emitting CaY2Al4SiO12: Dy3+ phosphors with excellent optical properties and thermal stability by partially substituting Y3+ with Gd3+10.1016/j.jallcom.2023.171558 ↗
58. Structure and optical properties of La2-xGdxSiO5: Dy3+ phosphors10.1016/j.jallcom.2018.10.090 ↗
59. Study on a highly thermostable Dy3+- activated borophosphate phosphor10.1021/acs.inorgchem.4c00358 ↗
60. Structure and luminescent properties of Dy3+ activated NaLa9(SiO4)6O2 yellow-emitting phosphors for application in white LEDs
61. Crystal structure, luminescence properties and thermal stability of Lu3+ ion-substituted BaY2Si3O10: Dy3+ phosphors10.1016/j.jallcom.2021.162758 ↗
62. Ratiometric optical thermometry based on a Dy3+, Eu3+ co-doped GdAl3(BO3)4 phosphor10.1039/D2NJ03805F ↗