Microstructure characterization and corrosion resistance in soil of Mg-2Zn-xCe-yCu alloy for light agricultural machinery
Source abstract
Abstract
The microstructure, mechanical properties, corrosion behavior, and potential for lightweight applications of Mg-2Zn alloys enhanced with Cu and Ce were investigated. It was observed that the Ce and Cu-containing phases displayed various morphologies in the as-cast and extruded conditions. The extruded alloy, containing 0.8 wt% Ce and 0.5 wt% Cu, exhibited optimal mechanical properties, with the yield strength of 289 MPa, ultimate tensile strength of 336 MPa, and elongation of 15.8 %. Grain boundary and precipitation strengthening significantly contributed to the increase in yield strength. After four months of soil burial, the specimen surface showed localized pits and cracks, likely serving as anodes in the areas including Ce and Cu-containing phases. The corrosion rates in different soil environments paddy, vegetable, orchard, and corn fields were 2.029, 2.293, 2.133, and 1.986 mg·cm −2·d −1 , respectively indicating variations due to complex soil conditions. The corrosion products included Mg(OH) 2 and Mg 5(CO 3) 4(OH) 2·4 H 2 O, among others, throughout the burial period. Furthermore, model assembly in SolidWorks and static structural simulation with ANSYS confirmed the alloy`s reliable load-bearing capacity, safety, and potential as the material for lightweight agricultural machinery.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. The role of agricultural machinery in improving green grain productivity in China: towards trans-regional operation and low-carbon practices10.1016/j.heliyon.2023.e20279 ↗
2. China’s agricultural machinery operation big data system10.1016/j.compag.2022.107594 ↗
3. Assessing carbon emission reduction benefits of the electrification transition of agricultural machinery for sustainable development: a case study in China
4. Location selection of agricultural Machinery sheds for improved scheduling and efficiency under sustainability goals10.1016/j.ecolind.2023.110986 ↗
5. Understanding the mechanisms of access and management of agricultural machinery in Benin
6. Advances in agricultural machinery management: a review10.1016/j.biosystemseng.2014.07.012 ↗
7. Life cycle inventory data of agricultural tractors10.1016/j.dib.2023.109174 ↗
8. High voltage electrification of tractor and agricultural machinery–A review10.1016/j.enconman.2016.02.018 ↗
9. Lightweight and sustainable materials—a global scenario
10. Research advances of magnesium and magnesium alloys worldwide in 2022
11. Applications of magnesium alloys for aerospace: a review10.1016/j.jma.2023.09.015 ↗
12. Recent research and advances in extrusion forming of magnesium alloys: a review10.1016/j.jallcom.2023.170080 ↗
13. The research progress of self-healing coatings for magnesium/magnesium alloy10.1016/j.jallcom.2023.170710 ↗
14. Consistent high rate oxygen reduction reaction during corrosion of Mg-Ag Alloy10.1016/j.corsci.2024.111893 ↗
15. Achieving high mechanical and corrosion resistance synergy properties of the Mg-11Li-6Al alloy through simple solutionizing treatments10.1016/j.vacuum.2023.112953 ↗
16. The effects of a corrosion product film on the corrosion behavior of Mg-Al alloy with micro-alloying of yttrium in a chloride solution10.1016/j.corcom.2022.10.002 ↗
17. Effects of Sc on microstructure, mechanical properties and corrosion behavior of Mg-0.5Zn-0.5Nd-xSc alloys10.1016/j.jallcom.2022.168044 ↗
18. Long-term corrosion kinetics and mechanism of magnesium alloy AZ31 exposed to a dry tropical desert environment10.1016/j.corsci.2019.108274 ↗
19. Atmospheric corrosion of field-exposed AZ31 magnesium in a tropical marine environment10.1016/j.corsci.2013.06.047 ↗
20. The corrosion behavior of magnesium alloy AZ31 in hot and dry atmospheric environment in turpan, China10.1016/S1452-3981(23)11128-X ↗
21. Effect of copper addition on precipitation behaviors and mechanical properties of Mg-Zn-Cu alloys with respect to high zinc
22. High thermal conductivity of highly alloyed Mg-Zn-Cu alloy and its mechanism10.1016/j.jallcom.2022.165614 ↗
23. In- vitro corrosion behavior of the cast and extruded biodegradable Mg-Zn-Cu alloys in simulated body fluid (SBF)10.1016/j.jma.2021.01.002 ↗
24. Synergistic improvement of antibacterial, mechanical and degradation properties of Cu added Mg-Zn-Zr alloy10.1016/j.matlet.2023.134115 ↗
25. Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying10.1016/j.jma.2020.08.016 ↗
26. Effect of Zn concentration on microstructure and corrosion resistance of Mg-Zn alloys microalloyed with Ca and Ce10.1108/ACMM-11-2020-2407 ↗
27. Formation mechanism of phosphate conversion film on Mg–8.8Li alloy10.1016/j.corcom.2021.08.002 ↗
28. Effect of varying Ce content on the mechanical properties and corrosion resistance of low-elastic-modulus Mg-Zn-Ce amorphous alloys10.3390/met12101637 ↗
29. Microstructure, electromagnetic shielding effectiveness and mechanical properties of Mg–Zn–Cu–Zr alloys10.1016/j.mseb.2015.03.012 ↗
30. Microstructure, texture, mechanical properties and electromagnetic shielding effectiveness of Mg–Zn–Zr–Ce alloys10.1016/j.msea.2016.05.098 ↗
31. Microstructure and mechanical properties of as-cast Mg-4Zn-0.5Zr-0.2Cu-0.2Ce alloy10.1080/02670836.2018.1457288 ↗
32. Corrosion behavior of AZ91D magnesium alloy in distilled water10.1016/j.arabjc.2020.05.004 ↗
33. Enhancement of mechanical properties of GTAW joints for ZC63 magnesium alloy by post-weld heat treatment10.1016/j.jmst.2023.06.019 ↗
34. Analysis of microstructure formation in cast Zn alloys derived from computational thermodynamics of the Zn-Al-Cu-Mg system10.1007/s10853-019-03553-1 ↗
35. Effect of Ce addition on the microstructure and tensile properties of extruded Mg–Zn–Zr alloys10.1016/j.msea.2014.06.054 ↗
36. The effect of Y addition on recrystallization and mechanical properties of Mg-6Zn-xY-0.5Ce-0.4Zr alloys10.1016/j.vacuum.2018.06.048 ↗
37. Effect of Sr addition on the high temperature deformation behavior and processing maps of Mg-7Sn alloy10.1016/j.jallcom.2023.170073 ↗
38. Improvement of mechanical properties of hot extruded and age treated Mg–Zn–Mn–Ca alloy through Sn addition10.1016/j.jallcom.2020.156711 ↗
39. The effect of Y addition on recrystallization and mechanical properties of Mg–6Zn–xY–0.5Ce–0.4Zr10.1016/j.vacuum.2018.06.048 ↗
40. Effect of Y and Ce additions on microstructure and mechanical properties of Mg–Zn–Zr alloys10.1016/j.msea.2015.07.065 ↗
41. Selective laser melting of magnesium alloys: necessity, formability, performance, optimization and applications10.1016/j.jmst.2022.12.053 ↗
42. The evolution mechanism of the second phase during homogenization of Al-Zn-Mg-Cu aluminum alloy10.1016/j.matdes.2023.112395 ↗
43. Study of the corrosion product films formed on the surface of Mg–xZn alloys in NaCl solution10.1016/j.corsci.2014.07.034 ↗
44. Quantifying the distribution characteristics of geochemical elements and identifying their associations in southwestern Fujian province, China10.3390/min10020183 ↗
45. Recent research advances on corrosion mechanism and protection, and novel coating materials of magnesium alloys: a review10.1039/D2RA07829E ↗
46. S2- doping inducing self-adapting dual anion defects in ZnSn(OH)6 for highly efficient photoactivity10.1016/j.apcatb.2023.123093 ↗
47. Facile preparation of MgAl2O4/CeO2/Mn3O4 heterojunction photocatalyst and enhanced photocatalytic activity
48. Creation of an internal electric field in SnO2@ZnS-ZnSn(OH)6 dual-type-II heterojunctions for efficient NO photo-oxidation
49. The effects of a corrosion product film on the corrosion behavior of Mg-Al alloy with micro-alloying of yttrium in a chloride solution10.1016/j.corcom.2022.10.002 ↗
50. High-efficiency modal analysis and deformation prediction of rice transplanter based on effective independent method