journal article·2024-09

Strengthened high-temperature resistance in B4C/SiC/2024Al composite via SiC nanowires pinning grain boundary

Andong Hua, Yishi Su, Yunpeng Cai, Di Zhang, Qiubao Ouyang

Publisher page

Abstract

Aiming at developing new B 4 C/Al neutron absorbing materials with both high thermal neutron absorption performance and high-temperature strength for neutron shielding applications, B 4 C/SiC/2024Al composites were fabricated by powder metallurgy process. TEM results revealed that SiC nanowires were distributed at Al grain boundaries and bonded tightly with Al matrix. Grain boundary sliding and grain rotation were efficiently restricted and prevented dislocation annihilation at GBs. The thermal stability of composite was improved by adding SiC nanowires and achieved a high-temperature strength of 163.4 ± 1.8 MPa at 573 K, which was increased by 92.2 % compared to the composite without addition of SiC nanowires. By analyzing the strengthening mechanism, dislocation strengthening was the dominant factor in the improvement of high-temperature strength. As for neutron absorption application, B 4 C/SiC/2024Al composite exhibited not only good high-temperature strength but also remarkable neutron absorption performance and matched thermal conductivity and coefficient of thermal expansion.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Metal matrix composites - from science to technological significance10.1016/j.compscitech.2005.05.027 ↗
2. Mechanical behavior of particle reinforced metal matrix composites10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
3. The design of a novel neutron shielding B4C/Al composite containing Gd10.1016/j.matdes.2016.07.140 ↗
4. Thermally stable microstructures and mechanical properties of B4C-Al composite with in-situ formed Mg(Al)B210.1016/j.jmst.2019.04.019 ↗
5. Room and high temperature fatigue behaviour of the A354 and C355 (Al–Si–Cu–Mg) alloys: role of microstructure and heat treatment10.1016/j.msea.2015.12.015 ↗
6. Mechanical properties and strengthening mechanisms of Al-15 Pct B4C composites with Sc and Zr at elevated temperatures10.1007/s11661-016-3606-4 ↗
7. A model for the yield strength of overaged Al–Zn–Mg–Cu alloys10.1016/S1359-6454(03)00363-X ↗
8. Design and development of an experimental wrought aluminum-alloy for use at elevated-temperatures10.1007/BF02628387 ↗
9. A model for the yield strength of overaged Al-Zn-Mg-Cu alloys10.1016/S1359-6454(03)00363-X ↗
10. Achieving exceptional high-temperature resistant Al matrix composites via two-dimensional BN pinning grain rotation10.1016/j.compositesb.2023.110570 ↗
11. A. Orthacker, G. Haberfehlner, J. Taendl, M.C. Poletti, B. Sonderegger, G.J.Nm Kothleitner, Diffusion-defining atomic-scale spinodal decomposition within nanoprecipitates, 17 (2018) 1101-1107.10.1038/s41563-018-0209-z ↗
12. Coarsening resistance at 400°C of precipitation-strengthened Al–Zr–Sc–Er alloys10.1016/j.actamat.2011.07.057 ↗
13. Effect of Sc microalloying on fabrication, microstructure and mechanical properties of SiCp/Al–Cu–Mg-Sc composites via powder metallurgy10.1016/j.msea.2023.145152 ↗
14. Highly stable coherent nanoprecipitates via diffusion-dominated solute uptake and interstitial ordering10.1038/s41563-022-01420-0 ↗
15. Enhancing high-temperature strength of (B4C+Al2O3)/Al designed for neutron absorbing materials by constructing lamellar structure10.1016/j.compositesb.2019.107674 ↗
16. High-temperature mechanical properties of 2024 Al matrix nanocomposite reinforced by TiC network architecture10.1016/j.msea.2019.138121 ↗
17. Single-crystal SiC nanowires with a thin carbon coating for stronger and tougher ceramic composites10.1002/adma.200500104 ↗
18. Direct observation of super-plasticity of beta-sic nanowires at low temperature10.1002/adfm.200700162 ↗
19. Effect of reinforcement shape on the stress–strain behavior of aluminum reinforced with SiC nanowire10.1016/j.matdes.2015.09.102 ↗
20. Aging behavior of 6061Al matrix composite reinforced with high content SiC nanowires10.1016/j.jallcom.2015.07.233 ↗
21. Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites10.1016/j.matchar.2022.112243 ↗
22. Fabrication, microstructure characterization and mechanical properties of B4C microparticles and SiC nanowires hybrid reinforced aluminum matrix composites10.1016/j.matchar.2022.112243 ↗
23. Balanced strength and ductility in B4C/SiC/2024Al composite with multimodal grain structure achieved by multistep ball milling and powder metallurgy10.1016/j.matchar.2023.112896 ↗
24. M. Hÿtch, E. Snoeck, R.J.U. Kilaas, Quantitative measurement of displacement and strain fields from HREM micrographs, 74 (1998) 131-146.10.1016/S0304-3991(98)00035-7 ↗
25. 10B areal density: a novel approach for design and fabrication of B4C/6061Al neutron absorbing materials10.1016/j.jnucmat.2017.02.020 ↗
26. Achieving simultaneous enhancement of strength and ductility in Al matrix composites by employing the synergetic strengthening effect of micro- and nano-SiCps10.1016/j.compositesb.2022.110350 ↗
27. The role of disconnections in deformation-coupled grain boundary migration10.1016/j.actamat.2014.05.062 ↗
28. Thermally stable nanostructured Al-Mg alloy with relaxed grain boundaries10.1016/j.actamat.2022.117640 ↗
29. Enhanced superplasticity achieved by disclination-dislocation reactions in a fine-grained low-alloyed magnesium system10.1016/j.ijplas.2022.103300 ↗
30. Unveiling the deformation mechanism of highly deformable magnesium alloy with heterogeneous grains10.1016/j.scriptamat.2022.114963 ↗
31. Hall-Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
32. The effect of grain size on the elevated temperature yield strength of polycrystalline aluminum10.1016/0956-716X(91)90165-W ↗
33. Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: a model for predicting their yield strength10.1016/j.scriptamat.2005.12.017 ↗
34. Toughening of aluminum matrix nanocomposites via spatial arrays of boron carbide spherical nanoparticles10.1016/j.actamat.2015.09.057 ↗
35. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys10.1016/S1359-6454(02)00201-X ↗
36. Pure Al matrix composites produced by vacuum hot pressing: tensile properties and strengthening mechanisms10.1016/j.msea.2004.05.081 ↗
37. Processing techniques for particulate-reinforced metal aluminum matrix composites10.1007/BF01113872 ↗