journal article·2024-08

Investigation on work hardening rate of Al-Zn-Mg-Cu alloy under solid solution process and thermomechanical coupled multi-step fast aging process

Pu Zhou, Yanli Song, Yumei Li, Wei Xiong, Kui Zeng, Wenlin Wu

Publisher page

Abstract

In this paper, the work hardening rate of Al-Zn-Mg-Cu alloy in the conditions of solid solution and thermo-mechanical coupled fast aging were investigated separately, and the main research content and results are as follows. Under the solid solution processes at different temperatures, the uniaxial tensile test curves of work hardening rate are relatively dispersed at a lower strain rate, and the work hardening rate increases with the increase of solution temperature. Then, as the strain rate increasing, the work hardening rate curves at each solution temperature gradually converge, until all curves intersect at a common intersection point. The above mechanism is attributed to the comprehensive effect of precipitates, solid solutions, and dynamic strain aging in the matrix. For the thermo-mechanical coupled aging, the work hardening rate has a great different with that of solid solution process. Consequently, the influence of pre-deformation on the work hardening rate were investigated, which concludes the curve shape type and the softening coefficient. The introduction of dislocation have some significant influences on the work hardening rate. Firstly, it makes the shape of work hardening rate curves change from shape 1 to shape 2. On the other hand, as the pre-deformation increasing, the variation law of softening coefficient shows an abnormal trend that is different from the ordinary law, which is due to the coordinated effect between dislocation density and dislocation induced precipitation. Furthermore, in order to reveal the internal mechanism in depth, the microstructure are observed by TEM (Transmission electron microscope). Finally, a targeted set of analytical models for work hardening rate were established, especially the mathematical explanation of the multicollinearity phenomenon of work hardening rate curves in the solid solution condition.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Microstructure, tensile properties and thermal stability of AlMgSiScZr alloy printed by laser powder bed fusion10.1016/j.jmst.2020.08.033 ↗
2. Warm formability and post-forming microstructure/property of high-strength AA 7075-T6 Al alloy10.1016/j.msea.2016.08.054 ↗
3. Ageing and work-hardening behaviour of a commercial AA7108 aluminium alloy10.1016/j.msea.2009.06.036 ↗
4. Novel fast-aging process for Al–Zn–Mg–Cu alloy sheets and its micro-mechanisms.10.1016/j.msea.2022.143996 ↗
5. J, Thermal deformation behavior and processing maps of 7075 aluminium alloy sheet based on isothermal uniaxial tensile tests10.1016/j.jallcom.2018.07.173 ↗
6. Mechanical behavior and deformation mechanism of 7075 aluminium alloy under solution induced dynamic strain aging10.1016/j.msea.2019.05.071 ↗
7. U.F. Kocks. Philos. Mag, A Statistical Theory of Flow Stress and Work-hardening, 123 (1965) 541-566.10.1080/14786436608212647 ↗
8. M.F. Ashb. Philos. Mag, The Deformation of Plastically Non-homogeneous Materials,170 (1969) 399-42.10.1080/14786437008238426 ↗
9. Laws for work-hardening and low-temperature creep10.1115/1.3443340 ↗
10. Kinetics of flow and strain hardening10.1016/0001-6160(81)90112-7 ↗
11. Modified kocks–mecking–estrin model to account nonlinear strain hardening. A10.1007/s11661-018-5001-9 ↗
12. A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminium alloys10.1016/S0749-6419(01)00015-8 ↗
13. Work hardening in heterogeneous alloys-a microstructural approach based on three internal state variables10.1016/S1359-6454(00)00289-5 ↗
14. The Influence of Precipitation on the work-hardening Behavior of the aluminium Alloys AA6111 and AA703010.1007/s11661-003-0007-2 ↗
15. Work-hardening model for polycrystalline metals under strain reversal at large strains10.1016/j.actamat.2007.01.003 ↗
16. Tensile flow and work hardening behavior of hot cross-rolled AA7010 aluminium alloy sheets10.1016/j.msea.2013.03.079 ↗
17. Flow stress and work-hardening behaviour of Al–Mg binary alloys.10.1016/j.ijplas.2014.08.006 ↗
18. Influence of microstructure on work-hardening and ductile fracture of aluminium alloys10.1016/j.matdes.2014.12.035 ↗
19. A combined precipitation, yield strength, and work hardening model for Al-Mg-Si alloys
20. Work-hardening and ductility of artificially aged AA6060 aluminium alloy10.1016/j.mechmat.2016.02.017 ↗
21. Work hardening and plastic anisotropy of naturally and artificially aged aluminium alloy AA606310.1016/j.mechmat.2019.103069 ↗
22. Effects of heat-treatment on the plastic anisotropy of extruded aluminium alloy AA606310.1016/j.msea.2017.09.133 ↗
23. A phenomenological model based on nanostructured dislocation cluster interactions to predict the work hardening behavior of cryodeformed materials10.1016/j.ijplas.2020.102772 ↗
24. Nonadditive strengthening functions for cold-worked cubic metals: experiments and constitutive modeling10.1016/j.ijplas.2020.102700 ↗
25. Novel flow stress prediction and work hardening behavior of aluminium alloy AA7075 at room and elevated temperatures
26. Effects of precipitates and solute atoms on the work hardening and softening behavior of Zn-rich aluminium alloy10.1016/j.msea.2022.143388 ↗
27. A.S. Krausz and K. Krausz, Unified constitutive laws ofplastic deformation. Academic press. In United Kingdom (1996).10.1016/B978-012425970-6/50006-0 ↗
28. Theory of the effect of dynamic strain aging on mechanical properties10.1002/pssa.2210300120 ↗
29. Dislocations, Pergamon Press