journal article·2024-08

All-electrochemical synthesis of SnBi/SnAgCu structures for low-temperature formation of high-reliability solder microjoints

Michael Njuki, Abdullah Faisal Pasha, Ronit Das, Peter Borgesen, Nikolay Dimitrov

Publisher page

Abstract

There is a growing interest in low temperature soldering, yet the use of low-melting point alloys for interconnection is often hindered by reliability concerns. Eutectic tin-bismuth (SnBi) alloy is being considered for soldering to Sn3Ag0.5Cu (SAC305) bumps at lower temperatures (150 °C), but the resulting hybrid structures are not very reliable. We have recently shown that superior reliability can be achieved by a post-soldering anneal to distribute up to 6 % Bi throughout the joint. However, the new approach is impractical for solder joints taller than 70 µm and the manufacturing feasibility in such cases warrants both SnBi and SAC305 to be electroplated. The present study utilizes electrochemistry to broaden the applicability of the aforementioned approach by the development of optimized routines for the separate electroplating of both structural alloys. The synthesis of the SAC305 alloy employs elemental co-deposition under strict thickness control, and the SnBi eutectic mixture may be produced likewise and deposited atop to enable low-temperature soldering. If the SnBi is deposited on separate pads, better composition control may be achieved alternatively by the successive plating of both metals, followed by reflow to facilitate their mixing. The established plating routines are further fine-tuned for the processing of an array of pillars.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Mechanical performance of advanced multicomponent lead-free solder alloy under thermal aging
2. A review of developments in the electrodeposition of tin10.1016/j.surfcoat.2015.12.081 ↗
3. Q.-h. Li, W.-w. Chen, W. Li, A study on microstructure of tin-lead solder joints under thermal cycling, in: Proceedings of the 2016 17th International Conference on Electronic Packaging Technology (ICEPT), IEEE, 2016, pp. 856–9.10.1109/ICEPT.2016.7583265 ↗
4. Strength and isothermal fatigue resistance of SnBi/SnAgCu joints reflowed at low temperatures10.1115/1.4051620 ↗
5. Electrodeposition of Pb-free Sn alloys in pulsed current10.1016/j.apsusc.2005.05.024 ↗
6. Electrodeposition of the Sn-58 wt% Bi layer for low-temperature soldering10.1007/s12540-011-0216-y ↗
7. Effect of additives on the co-electrodeposition of Sn–Ag–Cu lead-free solder composition10.1016/j.mseb.2010.01.017 ↗
8. Fatigue properties and microstructure of SnAgCu Bi-based solder joint10.1115/1.4047341 ↗
9. Formation of Sn–Bi solder alloys by sequential electrodeposition and reflow
10. Electrodeposition of SnBi coatings based on deep eutectic solvent10.1179/1743294413Y.0000000198 ↗
11. Analysis and modeling of aged SAC-Bi solder joints subjected to varying stress cycling conditions10.3390/ma16020750 ↗
12. R.S. Das, Constitutive relations and damage properties of Pb-free low temperature SnAgCu-Bi solder joints in fatigue, in: SSIE, PhD Dissertation, SUNY at Binghamton, Binghamton, NY, 2023.
13. Diffusion creep of realistic SnAgCu solder joints at times and stresses of relevance to thermal fatigue, IEEE Transactions on Components10.1109/TCPMT.2019.2929051 ↗
14. Surface morphology study of nanostructured lead-free solder alloy Sn-Ag-Cu developed by electrodeposition: effect of current density investigation
15. M.M. Njuki, A Study of Reliability Issues in Alternative Fine Pitch Solder Joint Interconnect Technology for System-In-Packages (SIPS), State University of New York at Binghamton, 2023, (in).
16. Studies on electrodeposition behavior of Sn–Bi alloys in plating baths modified by hydroquinone and gelatin10.1007/s10853-016-9883-x ↗
17. Electrodeposition and characterisation of Sn–Ag–Cu solder alloys for flip-chip interconnection10.1016/j.electacta.2010.08.102 ↗
18. Influence of poly (ethylene glycol) degradation on voiding sporadically occurring in solder joints with electroplated Cu10.1007/s11664-012-2017-6 ↗
19. Preventing void growth between Ni3Sn4 and solder10.1007/s11664-022-09853-8 ↗
20. Understanding and preventing Cu–Sn micro joint defects through design and process control10.1007/s10800-021-01630-5 ↗
21. Effect of Cu electroplating parameters on microvoid formation and high-speed shear strength in Sn-3.0 Ag-0.5 Cu/Cu joints10.1016/j.jallcom.2017.07.072 ↗
22. Tin electrodeposition from sulfuric acid solution containing Nigella sativa essential oil added10.12973/ejac.2017.00180a ↗
23. The high speed electrodeposition of Sn/Pb alloys10.1149/1.2124086 ↗
24. Electrodeposition of lead and lead-tin alloy on copper using an eco-friendly methanesulfonate plating bath10.1016/j.jmrt.2022.03.004 ↗
25. Electrodeposition of alloys XIX: electrodeposition of lead-tin alloys10.1016/0257-8972(88)90072-2 ↗
26. Electrodeposition of lead-free solder alloys10.1108/09540911311309031 ↗
27. Underpotential deposition of SnBi thin films for sodium ion batteries: the effect of deposition potential and Sn concentration10.1016/j.jallcom.2019.151658 ↗
28. Effects of hydroquinone and gelatin on the electrodeposition of Sn–Bi low temperature Pb-free solder10.1016/j.electacta.2012.12.036 ↗
29. The influence of the electrodeposition conditions on the electroanalytical performance of the bismuth film electrode for lead determination10.1002/elan.200804293 ↗
30. Electrodeposition of tin: a simple approach
31. Electrolytic coating of Sn nano-rods on nickel foam support for high performance lithium ion battery anodes10.1016/j.surfcoat.2016.01.015 ↗
32. Pure Sn coatings produced by pulse plating from stannate bath10.3390/coatings10020117 ↗
33. S. Thekkut, R. Das, M. Njuki, J. Li, R. Sivasubramony, F. Alshatnawi, M. Moise, C. Greene, N. Dimitrov, P. Borgesen, Effect of intermetallic morphology evolution on void formation in Ni/Sn/Ni micro joints, in: Proceedings of the 2020 IEEE 70th Electronic Components and Technology Conference (ECTC), IEEE, 2020, pp. 485–91.10.1109/ECTC32862.2020.00084 ↗
34. Enhanced voiding in Cu-Sn micro joints10.1016/j.materresbull.2022.111759 ↗
35. Galvanostatic studies of the kinetics of deposition and dissolution in the copper + copper sulphate system10.1039/tf9595501586 ↗
36. Copper-based nanomaterials for fine-pitch interconnects in microelectronics
37. Synthesis of Sn nanowire by template electrodeposition and its conversion into Sn nanosolder10.1016/j.matchar.2020.110278 ↗
38. Effects of electroplating variables on the voltammetric properties of bismuth deposits plated potentiostatically10.1002/elan.200603576 ↗
39. Electrodeposition of bismuth onto glassy carbon electrodes from nitrate solutions10.1016/j.jelechem.2005.04.019 ↗
40. Electrochemical composite deposition of Sn–Ag–Cu alloys10.1016/j.mseb.2009.09.012 ↗
41. Low melting point solders based on Sn, Bi, and In elements
42. Mechanism of Whisker growth suppression by lead co-deposition on electroplated tin film
43. A review of developments in the electrodeposition of tin-copper alloys10.1016/j.surfcoat.2016.06.065 ↗
44. Y. Qin, A. Wassay, C. Liu, G. Wilcox, K. Zhao, C. Wang, Electrodeposition of Sn-Cu solder alloy for electronics interconnection, in: Proceedings of the 2009 International Conference on Electronic Packaging Technology & High Density Packaging, IEEE, 2009, pp. 772–7.10.1109/ICEPT.2009.5270643 ↗
45. Y. Qin, Electrodeposition and Characterisation of Lead-free Solder Alloys for Electronics Interconnection, Loughborough University, 2010, (in).10.1016/j.electacta.2010.08.102 ↗
46. Additive effects on tin electrodepositing in acid sulfate electrolytes10.1007/s12613-013-0753-0 ↗
47. Electrodeposition of copper–tin film alloys for interconnect applications10.1016/j.electacta.2012.11.102 ↗