journal article·2024-06

Structural design, interfacial behavior and mechanical properties of bimetallic nacre-like structures by laser powder-bed fusion

Yingbo Peng, Yasong Shi, Taitong Jin, Jingmin Ren, Yuchao Bian

Publisher page

Abstract

The nacre-like (NL) structure exhibits unique performance in preventing the catastrophic crack growth and improving the strengthening/toughening of the overall structure. In this study, the In718/316LSS bimetallic NL structures were first fabricated by a powder laying-absorption multiple-material additive manufacturing technology based on laser powder-bed fusion, and the stress release mechanism was revealed. The NL structures with optimal geometric parameters was obtained by calculation and simulation: the hard-phase inclination angle of 15 °, the hard-phase volume fraction of 70 %, and the lamellar length-width ratio of 2. Due to the remelting effect, the same-layer bimetallic interfaces in NL structures showed strong metallurgical bonding with significantly grain refinement. The interlocking NL structure exhibited superior mechanical properties of 751.82 MPa in tensile strength and 25.14 % in elongation, compared with the base alloys and the non-interlocking NL structure. Moreover, abnormal variation of work hardening rate in NL structures attributed to the stress concentration and release behavior, caused by the multi-cracks initiation and cracks deflection during deformation of the interlocking structure. By the stress concentration-release effect, the NL structure not only achieved the strengthening and toughening, but also improved the crack tolerance to avoid the sudden fracture failure.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. The conflicts between strength and toughness10.1038/nmat3115 ↗
2. Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
3. Bone-inspired materials by design: toughness amplification observed using 3D printing and testing10.1002/adem.201600143 ↗
4. Flow characteristics in a honeycomb structure to design nanobubble generating apparatus10.1002/ceat.201900437 ↗
5. Rigid biological composite materials: structural examples for biomimetic design10.1007/BF02412144 ↗
6. Bioinspired structural materials10.1038/nmat4089 ↗
7. Experimental investigation of nanomechanics of the mineral-protein interface in nacre10.1016/j.mechrescom.2007.09.006 ↗
8. On flaw tolerance of nacre: a theoretical study10.1098/rsif.2013.1016 ↗
9. The toughening mechanism of nacre and structural materials inspired by nacre
10. On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure10.1016/j.jmps.2006.07.007 ↗
11. Nanoasperity: structure origin of nacre-inspired nanocomposites10.1021/acsnano.5b00119 ↗
12. Mechanical properties of nacre constituents and their impact on mechanical performance10.1557/jmr.2006.0239 ↗
13. Toughness and fracture properties in nacre-mimetic clay/polymer nanocomposites10.1002/adfm.201605378 ↗
14. A flake powder metallurgy approach to Al2O3/Al biomimetic nanolaminated composites with enhanced ductility10.1016/j.scriptamat.2011.05.022 ↗
15. Polyacrylamide-clay nacre-like nanocomposites prepared by electrophoretic deposition10.1016/j.compscitech.2007.02.007 ↗
16. Microstructures and mechanical properties of high-performance nacre-inspired Al-Si/TiB2 composites prepared by freeze casting and pressure infiltration10.1016/j.ceramint.2021.03.001 ↗
17. 3D printing of biomimetic composites with improved fracture toughness10.1016/j.actamat.2019.04.052 ↗
18. Printing nature: unraveling the role of nacre's mineral bridges10.1016/j.jmbbm.2017.05.007 ↗
19. Combination of stiffness, strength, and toughness in 3D printed interlocking nacre-like composites10.1016/j.eml.2019.100621 ↗
20. A novel nacre-like metal/metal structure by lithography and electrodeposition10.1016/j.jallcom.2021.158853 ↗
21. On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures10.1038/s41467-022-30873-9 ↗
22. Gradient design of bio-inspired nacre-like composites for improved impact resistance10.1016/j.compositesb.2021.108830 ↗
23. Achieving high strength and toughness by engineering 3D artificial nacre-like structures in Ti6Al4V-Ti metallic composite10.1016/j.compositesb.2021.109552 ↗
24. Voxelated soft matter via multimaterial mutinozzle 3D printing10.1038/s41586-019-1736-8 ↗
25. Enhanced mechanical performance of bio-inspired hybrid structures utilising topological interlocking geometry10.1038/srep26706 ↗
26. Topological interlocking of platonic solids: a way to new materials and structures10.1080/0950083031000065226 ↗
27. A novel biomimetic material duplicating the structure and mechanics of natural nacre10.1557/jmr.2011.65 ↗
28. Interfacial characterization and mechanical properties of 316L stainless steel/Inconel 718 manufactured by selective laser melting10.1016/j.msea.2019.05.011 ↗
29. Materials become insensitive to flaws at nanoscale: lessons from nature10.1073/pnas.0631609100 ↗
30. Mechanical properties of nanostructure of biological materials10.1016/j.jmps.2004.03.006 ↗
31. Cracks fail to intensify stress in nacreous composites10.1016/j.compscitech.2013.03.016 ↗
32. Effect of interlocking structure on mechanical properties of bio-inspired nacreous composites10.1016/j.compstruct.2019.111260 ↗
33. An analytical model for the bio-inspired nacreous composites with interlocked "brick-and-mortar" structures10.1016/j.compscitech.2020.108131 ↗
34. Inconel 718-W7Ni3Fe bimetallic structures using directed energy deposition-based additive manufacturing10.1080/17452759.2022.2025673 ↗
35. Effects of laser melting plus remelting on interfacial macrosegregation and resulting microstructure and microhardness of laser additive manufactured H13/IN625 bimetals10.1016/j.jmapro.2021.09.036 ↗
36. Interfacial characterisation of multi-material 316L stainless steel/Inconel 718 fabricated by laser powder bed fusion
37. Additive manufacturing of copper - H13 tool steel bi-metallic structures via Ni-based multi-interlayer
38. Formation of metastable cellular microstructures in selective laser melted alloys10.1016/j.jallcom.2016.12.209 ↗
39. Two-dimensional phase-field simulations of dendrite competitive growth during the directional solidification of a binary alloy bicrystal10.1016/j.actamat.2014.08.035 ↗
40. Dislocation generation in GaAs crystals grown by the Bridgman method using a crystallographic model10.1088/0965-0393/2/1/005 ↗
41. Dislocation density control in high-purity germanium crystal growth10.1016/j.jcrysgro.2013.11.075 ↗
42. Geometrically necessary dislocation density measurements at a grain boundary due to wedge indentation into an aluminum bicrystal10.1016/j.jmps.2017.05.005 ↗
43. Metallurgy, mechanistic models and machine learning in metal printing10.1038/s41578-020-00236-1 ↗
44. Interfacial microstructure and mechanical properties of 316L/CuSn10 multi-material bimetallic structure fabricated by selective laser melting10.1016/j.msea.2019.02.097 ↗
45. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
46. The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: deformation twinning, work hardening, and dynamic recovery10.1007/s11661-001-0109-7 ↗
47. Polysynthetic twinned TiAl single crystals for high-temperature applications10.1038/nmat4677 ↗
48. On the exceptional damage-tolerance of gradient metallic materials10.1016/j.mattod.2019.09.023 ↗
49. Deformation mechanisms in a metastable beta titanium twinning induced plasticity alloy with high yield strength and high strain hardening rate10.1016/j.actamat.2018.04.035 ↗