Microstructure and mechanical properties of high relative density Ti-48Al-1Fe alloy using irregular blend powder
Source abstract
Abstract
Conventional pressing and sintering methods provide difficulties in achieving high density for PM TiAl alloys. The Ti-48Al-1Fe alloy was prepared via vacuum pressure-less sintering, and the microstructure evolution and mechanical properties during the sintering densification process of the mixed powder system were investigated. The results shows that the density of the mixed powder reached 98.3 ± 0.14% after pressure-less sintering for 3 hours under high vacuum conditions at 1300°C. The microstructure of the as-sintered alloy is a fine duplex structure composed of α 2 /γ lamellar colonies and the composite structure. The ultimate tensile strength (UTS) of the as-sintered alloy at room temperature is 315 MPa. The density of the as-sintered alloy reach more than 99.9% after non-capsule hot isostatic pressing (HIP). The as-HIPed alloy exhibits an UTS of 332 MPa at room temperature. At high temperatures, it maintains high strength , with an UTS of 408 MPa and yield strength of 386 MPa at 900°C, which is comparable to that of forged TiAl alloy. Furthermore, the elongation of the sample at 900°C is 20.0%. This process offers a novel method for sintering PM TiAl with high density and mechanical properties at a low cost and near-net shape.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Progress in the understanding of gamma titanium aluminides10.1007/BF03221103 ↗
2. Processing and applications of intermetallic γ-TiAl-based alloys
3. Milling of gamma titanium–aluminum alloys10.1007/s00170-011-3812-6 ↗
4. Effect of quenching temperature and tempering time on grain refinement in TiAl base alloy
5. Effect of composition on grain refinement in TiAl-based alloys10.1016/S0966-9795(01)00079-6 ↗
6. Evolution of boride morphologies in TiAl-B alloys10.1007/BF02667377 ↗
7. A powder metallurgy method for manufacturing Ti-6Al-4V with wrought-like microstructures and mechanical properties via hydrogen sintering and phase transformation (HSPT)10.1016/j.scriptamat.2015.05.032 ↗
8. New powder metallurgical approach to achieve high fatigue strength in Ti-6Al-4V alloy10.1007/s11661-016-3409-7 ↗
9. Tribological and mechanical properties of copper matrix composites reinforced with carbon nanotube and alumina nanoparticles10.1088/2053-1591/ab4674 ↗
10. Direct current-enhanced densification kinetics during spark plasma sintering of tungsten powder10.1016/j.scriptamat.2017.09.009 ↗
11. Cold compaction and sintering of titanium and its alloys for near-netshape or preform fabrication
12. Cobalt-doped Ti–48Al–2Cr–2Nb alloy fabricated by cold compaction and pressure-less sintering10.1016/j.msea.2013.03.023 ↗
13. Densification behavior and microstructural evolution of Ti-48Al consolidated by spark plasma sintering10.1007/s10853-016-0358-x ↗
14. Field-activated sintering of blended elemental γ-TiAl powder compacts: porosity analysis and growth kinetics of Al3Ti10.1016/j.scriptamat.2013.02.004 ↗
15. Microstructures and properties of powder metallurgy TiAl alloys10.1016/S0921-5093(02)00639-1 ↗
16. Microstructure and mechanical properties of Ti–22Al–25Nb alloy fabricated by vacuum hot pressing sintering10.1016/j.msea.2014.08.018 ↗
17. High temperature mechanical properties of a sub microcrystalline Ti-47Al-3Cr alloy produced by mechanical alloying and hot isostatic pressing10.1016/S0925-8388(00)01167-1 ↗
18. Direct consolidation of γ-TiAl-Mn-Mo from elemental powder mixtures and control of porosity through a basic study of powder reactions10.1007/s11661-997-0029-2 ↗
19. M. Yan, F. Yang, B. LuMicrostructure and Mechanical Properties of High Relative Density γ-TiAl Alloy Using Irregular Pre-Alloyed Powder, Metals. 11 635.2021, , 635..10.3390/met11040635 ↗
20. High-density and low-interstitial Ti-23Al-17Nb prepared by vacuum pressure-less sintering from blended elemental powders10.1016/j.vacuum.2019.03.001 ↗
21. The preparation of TiAl-based intermetallics from elemental powders through a two-step pressure-less sintering process10.1361/105994998770347837 ↗
22. A pseudo-HIP process applicable for the near-net-shape synthesis of inter-metallic compounds
23. Cobalt-doped Ti–48Al–2Cr–2Nb alloy fabricated by cold compaction and pressure-less sintering10.1016/j.msea.2013.03.023 ↗
24. The effect of a small addition of nickel on the sintering, sintered microstructure, and mechanical properties of Ti–45Al–5Nb–0.2C–0.2B alloy10.1016/j.jallcom.2013.05.104 ↗
25. The sintering densification, microstructure and mechanical properties of gamma Ti–48Al–2Cr–2Nb alloy with a small addition of copper10.1016/j.msea.2012.08.100 ↗
26. Sintering densification, microstructure and mechanical properties of Sn-doped high Nb-containing TiAl alloys fabricated by pressure-less sintering10.1016/j.intermet.2020.106891 ↗
27. Improvement of microstructure and mechanical properties of TiAlNb alloy by adding Fe element10.1016/S1003-6326(20)65298-0 ↗
28. Effects of Fe, Co and Ni elements on the ductility of TiAl alloy10.1016/j.jallcom.2014.07.199 ↗
29. Fine duplex Ti-48Al alloy with high strength produced by forging based on near-γ microstructure10.1016/j.jallcom.2023.169058 ↗
30. Anisotropy of microstructure and tensile properties of Ti–48Al–2Cr–2Nb fabricated by electron beam melting
31. A Newly Generated Nearly Lamellar Microstructure in Cast Ti-48Al-2Nb-2Cr Alloy for High-Temperature Strengthening10.1007/s11661-019-05491-8 ↗
32. A high-performance β-solidifying TiAl alloy sheet: Multi-type lamellar microstructure and phase transformation10.1016/j.matchar.2018.02.005 ↗
33. D. Zhang, Y. Chen, G. Zhang, N. Liu, F. Kong, J. Tian, J. SunHot deformation behavior and microstructural evolution of PM Ti43Al9V0.3Y with fine equiaxed γ and B2 grain microstructure. Materials.13, 896.2020, , 896..10.3390/ma13040896 ↗
34. A novel hot pack rolling of high Nb-TiAl sheet from cast ingot10.1016/j.intermet.2015.07.009 ↗
35. High strain rate deformation of Ti-48Al-2Nb-2Cr10.1016/1359-6454(95)00329-0 ↗
36. Compression properties and work-hardening behavior of Ti2AlC/TiAl composites fabricated by combustion synthesis and hot press consolidation in the Ti–Al–Nb–C system10.1016/j.matdes.2011.05.041 ↗
37. Influence of heat treatment on microstructure and deformation behaviour of the alloy Ti50Al48Cr2 prepared by reactive powder processing10.2320/matertrans1989.34.228 ↗
38. Sintering and rounding kinetics of irregular glass particles
39. Influence of powder properties on densification mechanism during spark plasma sintering10.1016/j.scriptamat.2017.06.034 ↗
40. Production of highly densified TiAl by die compaction-sintering method10.2320/jinstmet1952.57.8_944 ↗
41. The deformation and fracture of TiAl at elevated temperatures10.1007/BF03161822 ↗
42. T.I. Nazarova, V.M. Imayev, R.M. Imayev, H.-J. FechtStudy of microstructure and mechanical properties of Ti-45Al-(Fe,Nb) (at%) alloys, Intermetallics. 82, 26-31. 2017, , 26–31..10.1016/j.intermet.2016.11.009 ↗
43. Evading the strength-ductility trade-off at room temperature and achieving ultrahigh plasticity at 800℃ in a TiAl alloy10.1016/j.actamat.2021.117585 ↗
44. Strengthening materials by engineering coherent internal boundaries at the nanoscale10.1126/science.1159610 ↗