Thermal plasma spraying of NiTi powder for thick coating of shape memory alloy
Source abstract
Abstract
In this article, NiTi coating was fabricated via a thermal plasma process by tuning various parameters. The work aims to achieve shape memory behavior that could retained in the plasma-sprayed samples. Various plasma spraying process parameters such as plasma power, powder feed rate, spraying plan, and net powder spray were taken into consideration for the spraying. Microstructural, thermal, mechanical, and shape memory behavior was analyzed on the plasma-sprayed samples. Various phases austenite, martensite, and intermetallic phases such as Ni xTi y , Ni-Ti-O, Ni, and Ti were confirmed from the X-ray diffraction analysis. The presence of these phases in the samples contributes to the thermal transformation and mechanical behavior. A less heat-affected zone of 10 µm along the interface was confirmed without any diffusion of elements from the substrate to the coating layers. There was a homogenous distribution elemental composition of Ni and Ti throughout the coating layers. The shape memory behavior of the coating samples was confirmed by the thermo-mechanical analysis by performing the response in multiple cycles.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Saito · Mater. Sci. Eng. A · 1992 · 161 · 9110.1016/0921-5093(93)90479-X ↗
2. Furuya · Mater. Trans. JIM · 1993 · 34 · 22410.2320/matertrans1989.34.224 ↗
3. Taya · 1992 · 373
4. Net-shape NiTi shape memory alloy by spark plasma sintering method10.3390/app11041802 ↗
5. Fabrication of thermal plasma sprayed NiTi coatings possessing functional properties10.3390/coatings11050610 ↗
6. Processing of materials: high temperature applications
7. Powder metallurgical fabrication processes for NiTi shape memory alloy parts10.1016/S0921-5093(02)00028-X ↗
8. Effective parameters on the final properties of NiTi-based alloys manufactured by powder metallurgy methods: a review
9. Wear behavior of martensitic NiTi shape memory alloy under ball-on-disk sliding tests10.1016/j.triboint.2013.05.012 ↗
10. Cavitation-resistant NiTi coatings produced by low-pressure plasma spraying (LPPS)10.1016/j.wear.2015.03.003 ↗
11. Tribological behavior of NiTi alloy produced by spark plasma sintering method10.3390/coatings11101246 ↗
12. Cavitation erosion of plasma-sprayed NiTi coatings10.1016/j.wear.2005.06.002 ↗
13. Thermal plasma technology: the prospective future in material processing10.1016/j.jclepro.2016.10.154 ↗
14. S. Samal, Thermal Plasma Processing of materials: high temperature applications. Ref. Modul. Mater. Sci. Mater. Eng. 2020.
15. Deposition and characterization of plasma sprayed NiTi powder on stainless steel and graphite substrate10.1016/j.matchemphys.2023.128146 ↗
16. Shape setting in super-elastic NiTi ribbon
17. H. Funakubo, Shape Memory Alloys, Gorden & Breach, New York, 1986.
18. Shugo · Bull. Res. Inst. Min. Dress. Metall. Tohoku. Univ. · 1985 · 41 · 35
19. Precipitation processes in near-equiatomic TiNi shape memory alloys10.1007/BF02650086 ↗
20. T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak, Binary alloy phase diagrams, vol. 3, (1990) ASM International, 2nd edn, Materials Park, Ohio.
21. 2019
22. Evaluation of Microstructure–Porosity–Hardness of Thermal Plasma-Sprayed NiTi Coating Layers
23. Mechanical and tribological properties evaluation of plasma-sprayed shape memory alloy coating10.1016/j.jallcom.2021.158599 ↗
24. Mechanical properties of NiTi plasma spray coating10.1007/s11666-020-01017-6 ↗
25. W. Zhang, L. Zheng, & S. Sampath, Effect of injection angle on particles in-flight characteristics, (2006), Proceedings of the ninth AIAA/ASME joint thermo-physics and heat transfer conference.10.2514/6.2006-3826 ↗
26. Effects of plasma spray parameters on TiO2-coated mild steel using design of experiment (DoE) approach10.1016/j.ceramint.2012.09.092 ↗
27. Influence of powder size on characteristics of air plasma sprayed silicon coatings10.1016/j.ceramint.2012.03.080 ↗
28. Surface Deformation recovery by thermal annealing of thermal plasma sprayed shape memory NiTi Alloys10.3390/coatings13020433 ↗
29. Tribological behavior of NiTi alloy produced by spark plasma sintering method10.3390/coatings11101246 ↗
30. Interfacial adhesion of Thick NiTi coating on substrate stainless steel10.3390/ma15238598 ↗
31. Cavitation erosion of plasma-sprayed NiTi coatings10.1016/j.wear.2005.06.002 ↗
32. Cavitation-resistant NiTi coatings produced by low-pressure plasma spraying (LPPS)10.1016/j.wear.2015.03.003 ↗
33. Cavitation erosion of NiTi explosively welded to steel10.1016/0043-1648(94)07029-6 ↗
34. Cavitation erosion of two NiTi alloys10.1016/0043-1648(92)90076-K ↗
35. Cavitation erosion resistance of NiTi thin films produced by filtered arc deposition10.1016/j.wear.2009.01.035 ↗