Unveiling the enhancement of mechanical properties in cryogenic-treated Sm2Co17 permanent magnets without sacrifice of magnetic properties
Source abstract
Abstract
SmCo permanent magnets are used in some of the strongest permanent magnets, particularly for applications between about 200 and 550 °C. However, their brittleness limits their practical use. Improving their mechanical properties is therefore of great practical significance. Cryogenic treatment is firstly applied in SmCo permanent magnets to enhance the mechanical properties. The flexural strength has been increased by 14.3% along the weakest orientation, and the impact toughness has been increased by 7.0%. After cryogenic treatment, the intrinsic coercivity is slightly increased, and the other magnetic properties are almost unchanged, which is different from other methods to improve mechanical properties at the expense of magnetic properties. The enhancement of flexural strength and impact toughness primarily stems from a decrease in residual stress. This study provides an effective and convenient approach to enhance the mechanical properties in Sm 2Co 17 permanent magnets without sacrifice of magnetic properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Superconducting Materials and Applications · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Recent research development of rare-earth permanent magnetic materials
2. Development of samarium–cobalt rare earth permanent magnetic materials10.1007/s12598-014-0405-1 ↗
3. An atomistic study of plastic deformation of SmCo5 by amorphous shear bands
4. Overcoming mechanical fragility in Sm-Co permanent magnet materials10.1016/j.actamat.2020.06.058 ↗
5. Study on strengthening and toughening of sintered rare-earth permanent magnets10.1063/1.3061764 ↗
6. Perspective and prospects for rare earth permanent magnets10.1016/j.eng.2018.11.034 ↗
7. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
8. Fracture in sintered Sm-Co permanent magnetic materials
9. Anisotropic fracture behavior of sintered rare-earth permanent magnets10.1109/TMAG.2005.852948 ↗
10. Anisotropy of mechanical properties in sintered Nd–Fe–B magnets10.1016/j.jmmm.2006.01.169 ↗
11. Correlation of mechanical anisotropy with fine grain strengthening for Sm2Co17-type sintered permanent magnets10.1016/j.jre.2021.07.012 ↗
12. Effect of surface modification on mechanical properties and thermal stability of Sm–Co high temperature magnetic materials10.1016/j.surfcoat.2006.07.233 ↗
13. Improved mechanical properties and thermal stability of Sm-Co high temperature magnets resulting from surface modifications10.1016/S1006-706X(08)60168-5 ↗
14. Recent research development of rare-earth permanent magnetic materials
15. Zirconium content induced mitigation of mechanical anisotropy in 2:17 type SmCo magnets10.1016/j.jre.2019.07.006 ↗
16. Playing with defects in metals10.1038/nmat4929 ↗
17. Liu, S. and J. Liu, 2006. Method of improving toughness of sintered RE-Fe-B-type, rare earth permanent magnets. 2006, US.
18. Effects of cryogenic treatment on residual stresses of AISI D2 tool steel
19. Enhancement of the mechanical properties of EN52CrMoV4 spring steel by deep cryogenic treatment10.1002/mawe.201900122 ↗
20. Kalia · 2013 · 16 · 296
21. Residual elastic stress–strain field and geometrically necessary dislocation density distribution around nano-indentation in TA15 titanium alloy10.1016/S1003-6326(13)62422-X ↗
22. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
23. Influence of segregation on microstructure and hot workability of grade 250 maraging steel10.1007/s12540-020-00771-0 ↗
24. Zadvorkin, S.M., et al., 2019. Comparison of x-ray analysis and EBSD analysis methods for residual stresses estimation in welded pipes made of 13CrVA steel, in Proceedings of the International Conference on Advanced Materials with Hierarchical Structure for New Technologies and Reliable Structures 2019.10.1063/1.5132264 ↗
25. Effects of thermal residual stress on interfacial properties of polyphenylene sulphide/carbon fibre (PPS/CF) composite by microbond test10.1007/s10853-015-9251-2 ↗
26. Residual stress in engineering materials: a review10.1002/adem.202100786 ↗
27. Residual stress. Part 2 – Nature and origins10.1179/026708301101510087 ↗