journal article·2024-03

High-strength corrosion-resistant FeMnCr-based composite damping alloys fabricated by vacuum annealing

Wei He, Yue Yuan, Jiazhen Yan, Yong Huang, Huabei Peng, Yuhua Wen

Publisher page

Abstract

High-strength high manganese FeMn-based damping alloys suffer from lower damping capacity at low strain amplitudes and poor corrosion resistance , while the strength is lower in stainless ferromagnetic FeCr-based alloys with high damping capacity at low strain amplitudes. By simple vacuum annealing, we fabricated high-strength, high-manganese FeMnCr-based alloys coated with ferromagnetic FeCr-based stainless damping alloys. Compared to the FeMn-based alloys, the FeMnCr-based composite alloys showed not only higher damping capacity at low strain amplitudes and higher tensile strength but also much better corrosion resistance. Stress relief annealing could further improve their damping capacity. The vacuum annealing will offer a new technique for fabricating composite alloys with unique properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies · Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. High damping metals for engineering applications10.1016/0025-5416(69)90033-0 ↗
2. Compressive properties of 3-D printed Mg–NiTi interpenetrating-phase composite: Effects of strain rate and temperature10.1016/j.compositesb.2021.108783 ↗
3. 3D printed Mg-NiTi interpenetrating-phase composites with high strength, damping capacity, and energy absorption efficiency10.1126/sciadv.aba5581 ↗
4. High-damping metals and alloys, Metall10.1007/BF02670281 ↗
5. Remarkable improvement of damping capacity in FeMn-based alloys by a long annealing10.1080/02670836.2020.1780002 ↗
6. High-damping properties of Mn-Cu sintered alloys10.1016/j.msea.2006.05.163 ↗
7. Damping capacity, magnetic and mechanical properties of Fe-18Cr alloy10.1016/j.jmmm.2019.165777 ↗
8. Development of a novel Mg-Y-Zn-Al-Li alloy with high elastic modulus and damping capacity10.1016/j.msea.2020.139744 ↗
9. An investigation into the effects of graphite particles on the damping behavior of ZA-27 alloy composite material10.1016/j.matdes.2010.07.006 ↗
10. Effect of cooling rate on damping capacity of Fe-Cr based ferromagnetic metal alloy10.1016/j.msea.2015.10.086 ↗
11. Investigation of the effect of alloying elements on damping capacity and magnetic domain structure of Fe-Cr-Al based vibration damping alloys10.1016/j.jallcom.2016.10.297 ↗
12. Influence of static stress on damping behavior in Fe-15Cr and Fe-8Al ferromagnetic alloys10.1016/j.msea.2011.03.062 ↗
13. Investigation of constant prestress in effecting damping capacity of Fe-15Cr-2.5Mo-1.0Ni casting ferromagnetic alloy10.1016/j.jallcom.2015.07.273 ↗
14. Damping capacity in Fe-Mn binary alloys10.2355/isijinternational.37.1023 ↗
15. The influence of Co on damping capacity of Fe-Mn-Co alloys10.1016/S0025-5408(98)00145-7 ↗
16. High damping Fe-Mn martensitic alloys for engineering applications10.1016/S0029-5493(99)00268-X ↗
17. Internal friction mechanism of Fe-19Mn alloy at low and high strain amplitude10.1016/j.msea.2012.10.060 ↗
18. Effect of alloying with Al and Cr on the microstructure, damping capacity and high-temperature oxidation behaviors of Fe-17Mn damping alloys10.1016/j.jallcom.2019.153035 ↗
19. Designing damping capacity in high strength Fe–Mn based alloys by controlling crystal defect configurations10.1080/14786435.2021.1939901 ↗
20. Microstructure, mechanical properties, and damping capacity in stir zone after friction stir welding of Fe-17Mn damping alloy10.1016/j.jallcom.2019.06.367 ↗
21. Relationship between damping capacity and variations of vacancies concentration and segregation of carbon atom in an Fe-Mn alloy10.1007/s11661-015-3111-1 ↗
22. Strain amplitude dependence of the damping capacity in Fe-17%Mn alloy10.1016/S1359-6462(97)00525-3 ↗
23. Controlled aging processes to improve damping capacity of Fe-19Mn alloy10.1088/2053-1591/ab0ed5 ↗
24. Effect of deformation on damping capacity and microstructure of Fe-22%Mn-8%Co alloy10.2320/matertrans.46.1274 ↗
25. Influences of Si and Co Addition on Microstructure and Damping Capacity of Fe-Mn Alloy10.4028/www.scientific.net/KEM.319.85 ↗
26. Effects of Cr on stacking-fault energy and damping capacity of FeMn10.1080/02670836.2016.1262318 ↗
27. Damping mechanism and application of Fe-Mn based alloys10.1016/S0921-5093(99)00395-0 ↗
28. Effect of high strain amplitude and pre-deformation on damping property of Fe-Mn alloy10.1016/j.jallcom.2018.08.099 ↗
29. A novel sandwich Fe-Mn damping alloy with ferrite shell prepared by vacuum annealing10.1088/1361-665X/aaaf95 ↗
30. Šalak · 2012
31. Effects of ε-martensite and dislocations behavior by thermo-mechanical treatment on Fe-Cr-Mn damping alloy10.1016/j.msea.2008.09.138 ↗
32. Warren · 1969 · 275
33. An X-Ray diffraction line profile of cold-worked hexagonal alloys Zn-Ag: η and ε phase10.1007/BF02658675 ↗
34. Peak Shift Method on Stacking Fault Probability Determination and Its Application on Fe Mn Si Alloys
35. B.E..Warren, X-ray Diffraction, Addison-Wesley1969.
36. Effects of cold rolling deformation on microstructure and damping capacity of a Fe-Mn-Cr-Co-Si alloy
37. A short review on the effect of Cr on the fcc–hcp phase transition in Fe–Mn-based alloys10.1007/s40830-020-00285-z ↗
38. The effects of solute carbon atoms in ferrite on austenitization and the thermal expansion coefficients of ferrite and austenite
39. Thermal expansion characteristics of Fe–9Cr–0.12C–0.56Mn–0.24V–1.38W–0.06Ta (wt%) reduced activation ferritic–martensitic steel10.1016/j.jnucmat.2015.01.026 ↗
40. Transformation-induced plasticity via γ→ ε→ α’and γ→ ε→ γ martensitic transformations in Fe–15Mn–10Cr–8Ni–4Si alloy10.1016/j.msea.2021.142583 ↗
41. Lübbehusen · 1984
42. Impact of magnetic transition on Mn diffusion in α-iron: Correlative state-of-the-art theoretical and experimental study10.1103/PhysRevB.104.184107 ↗
43. Diffusion of Mn54 in iron and iron-manganese alloys
44. Diffusion of manganese in paramagnetic BCC iron10.1007/BF02648721 ↗
45. Vaporization of Mn from Surface of Fe-Cr-Mn Alloy10.2320/jinstmet1952.56.2_168 ↗
46. Effects of ε martensite and nitrogen on the damping property of high strength Fe-Cr-Mn alloys10.1016/S0925-8388(03)00251-2 ↗
47. Effect of chromium addition on damping capacity, mechanical property, and corrosion resistance of Fe-18%Mn alloy10.4028/www.scientific.net/KEM.319.73 ↗
48. Temperature dependence of the damping capacity in Fe-19.35Mn alloy10.1016/j.jallcom.2007.01.147 ↗
49. Application of damping mechanism model and stacking fault probability in Fe-Mn alloy10.1016/j.matchar.2007.05.023 ↗
50. Effect of Si and Cr on stacking fault probability and damping capacity of Fe-Mn alloy10.1016/j.msea.2007.06.063 ↗