Lone-pair electron-induced low lattice thermal conductivity and excellent thermoelectric performance of AuX (X = S, Se, Te) monolayers
Source abstract
Abstract
We present a detailed study on the phonon thermal transport and thermoelectric (TE) properties of gold monochalcogenide AuX (X = S, Se, Te) monolayers via first-principles calculations and the Boltzmann transport theory. At room temperature, the calculated lattice thermal conductivity ( κ l) values in the x-direction ( y -direction) were determined to be 12.66 (3.59), 6.06 (1.23), and 3.02 (0.40) W/(m·K) for the AuS, AuSe, and AuTe monolayers, respectively. The analysis of scattering matrix elements and anharmonic scattering rates suggested that the presence of strong bond anharmonicity leads to low κ l values. This anharmonicity was induced by the nonlinear electrostatic repulsive force between lone-pair electrons (LPEs) surrounding the chalcogen atom and adjacent bonding electron. Furthermore, the AuS monolayer exhibited the highest bond anharmonicity among the three monolayers. This can be attributed to the reduced strength of the electrostatic repulsive force when electronegativity decreased from S to Se and Te. Although the AuS monolayer exhibited the strongest bond anharmonicity, its κ l was still the largest, demonstrating that among the factors that influence κ l , harmonic factors have a greater effect than anharmonic parameters. When the atomic mass was increased, the phonon frequencies, phonon group velocities, and κ l decreased. Benefiting from low κ l induced by LPEs, the maximum ZT values of p-type doped AuSe and AuTe monolayers exceeded 1.0 and 2.0 at T = 800 K, respectively. These results not only confirmed that the introduction of LPEs can reduce the lattice thermal conductivity and enhance the TE performance of 2D materials, but also demonstrated the promising potential of the 2D AuX family for applications in high-temperature TE devices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · 2D Materials and Applications · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. H.J. Goldsmid, Introduction to Thermoelectricity, second edn., Springer, New York, 2016.10.1007/978-3-662-49256-7 ↗
2. Enhanced thermoelectric performance by lone-pair electrons and bond anharmonicity in the two-dimensional Ge2Y2 family of materials with Y= N, P, As, or Sb10.1103/PhysRevB.105.075431 ↗
3. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states10.1126/science.1159725 ↗
4. High-performance bulk thermoelectrics with all-scale hierarchical architectures10.1038/nature11439 ↗
5. Zintl-phase Eu2ZnSb2: a promising thermoelectric material with ultralow thermal conductivity10.1073/pnas.1819157116 ↗
6. Nonmetallic crystals with high thermal conductivity10.1016/0022-3697(73)90092-9 ↗
7. Unconventional thermal transport enhancement with large atom mass: a comparative study of 2D transition dichalcogenides10.1088/2053-1583/aa9822 ↗
8. Thermoelectric power factor: enhancement mechanisms and strategies for higher performance thermoelectric materials10.1016/j.mser.2015.08.001 ↗
9. Experimental identification of critical condition for drastically enhancing thermoelectric power factor of two-dimensional layered materials10.1021/acs.nanolett.8b03026 ↗
10. Two-dimensional molybdenum carbides: potential thermoelectric materials of the MXene family10.1039/C4CP00467A ↗
11. Electronic and optoelectronic applications based on 2D novel anisotropic transition metal dichalcogenides10.1002/advs.201700231 ↗
12. Highly stable two-dimensional gold selenide with large in-plane anisotropy and ultrahigh carrier mobility10.1039/C9NH00586B ↗
13. Highly in-plane anisotropic 2D semiconductors beta-AuSe with multiple superior properties: a first-principles investigation10.1088/1361-648X/ab2a6a ↗
14. Ag; X = S, Se, Te) monolayers: Promising photocatalysts for oxygen evolution reaction with excellent light capture capability10.1016/j.apsusc.2022.154055 ↗
15. Monolayer square-Ag2X (X = S, Se): Excellent n-type thermoelectric materials with high power factors10.1016/j.apsusc.2021.149230 ↗
16. Low thermal conductivity and high performance anisotropic thermoelectric properties of XSe (X = Cu, Ag, Au) monolayers10.1039/D1CP05708A ↗
17. Two-dimensional square-Au2S monolayer: a promising thermoelectric material with ultralow lattice thermal conductivity and high power factor
18. Extraordinary lattice thermal conductivity of gold sulfide monolayers10.1039/D2NA00019A ↗
19. Lattice thermal transport in monolayer group 13 monochalcogenides MX (M = Ga, In; X = S, Se, Te): interplay of atomic mass, harmonicity, and lone-pair-induced anharmonicity10.1021/acs.inorgchem.0c01407 ↗
20. First-principles description of anomalously low lattice thermal conductivity in thermoelectric Cu-Sb-Se ternary semiconductors
21. High thermoelectric performance in tellurium free p-type AgSbSe210.1039/c3ee41935e ↗
22. Microscopic origin of the extremely low thermal conductivity and outstanding thermoelectric performance of BiSbX3 (X = S, Se) revealed by first-principles study10.1039/D0CP01231A ↗
23. Lone-pair electrons do not necessarily lead to low lattice thermal conductivity: an exception of two-dimensional penta-CN210.1021/acs.jpclett.8b00820 ↗
24. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
25. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
26. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
27. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
28. A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu10.1063/1.3382344 ↗
29. Krukau · Influ. Exch. Screen. Parameter Perform. Screen. Hybrid. Funct., J. Chem. Phys. · 2006 · 125
30. LOBSTER: A tool to extract chemical bonding from plane-wave based DFT10.1002/jcc.24300 ↗
31. Phonon-phonon interactions in transition metals10.1103/PhysRevB.84.094302 ↗
32. The hiphive package for the extraction of high-order force constants by machine learning10.1002/adts.201800184 ↗
33. Microscopic theory of force constants in the adiabatic approximation10.1103/PhysRevB.1.910 ↗
34. ShengBTE: a solver of the Boltzmann transport equation for phonons10.1016/j.cpc.2014.02.015 ↗
35. BoltzTraP2, a program for interpolating band structures and calculating semi-classical transport coefficients10.1016/j.cpc.2018.05.010 ↗
36. Bai · Chromium ditelluride monolayer: A Nov. Promis. 2H phase Thermoelectr. Mater. Direct bandgap Ultra Lattice Therm. Conduct., J. Alloy. Compd. · 2023 · 930
37. Stacking pattern induced high ZTs in monolayer SnSSe and bilayer SnXY (X/Y= S, Se) materials with strong anharmonic phonon scattering10.1016/j.cej.2022.140832 ↗
38. Unravelling the thermoelectric properties and suppression of bipolar effect under strain engineering for the asymmetric Janus SnSSe and PbSSe monolayers10.1016/j.apsusc.2022.153962 ↗
39. Thermoelectric efficiency of two-dimensional pentagonal-PdSe2 at high temperatures and the role of strain10.1021/acsaem.2c03141 ↗
40. Prediction of structurally stable two-dimensional AuClO2 with high thermoelectric performance
41. van der Waals volumes and radii10.1021/j100785a001 ↗
42. Bonding heterogeneity inducing low lattice thermal conductivity and high thermoelectric performance in 2D CdTe210.1021/acsaem.2c01176 ↗
43. Electron localization in solid‐state structures of the elements: the diamond structure10.1002/anie.199201871 ↗
44. Accurate and efficient algorithm for Bader
45. Importance of quadratic dispersion in acoustic flexural phonons for thermal transport of two-dimensional materials10.1103/PhysRevB.103.235426 ↗
46. Physically founded phonon dispersions of few-layer materials and the case of borophene10.1080/21663831.2016.1174163 ↗
47. First-principles
48. Strongly anisotropic in-plane thermal transport in single-layer black phosphorene10.1038/srep08501 ↗
49. Accelerating evaluation of converged lattice thermal conductivity10.1038/s41524-017-0058-3 ↗
50. Phonon transport in single-layer transition metal dichalcogenides: a first-principles study10.1063/1.4896685 ↗
51. Reducing lattice thermal conductivity of the thermoelectric snse monolayer: role of phonon–electron coupling10.1021/acs.jpcc.9b02344 ↗
52. Monolayer Ag2S: ultralow lattice thermal conductivity and excellent thermoelectric performance10.1021/acsaem.0c01844 ↗
53. Complex thermoelectric materials10.1038/nmat2090 ↗
54. High-mobility transport anisotropy and linear dichroism in few-layer black phosphorus10.1038/ncomms5475 ↗
55. Strain-induced ultrahigh electron mobility and thermoelectric figure of merit in monolayer α-Te10.1021/acsami.0c10236 ↗
56. Bi2O2Se nanosheet: an excellent high-temperature n-type thermoelectric material10.1063/1.5017217 ↗
57. Thermoelectric materials and applications: a review10.3390/en16176409 ↗
58. Revisiting the thermoelectric properties of lead telluride, Materials Today
59. A review on bismuth telluride (Bi2Te3) nanostructure for thermoelectric applications10.1016/j.rser.2017.10.112 ↗
60. Performance of skutterudite-based modules10.1007/s11664-016-4849-y ↗
61. Advances in half-Heusler alloys for thermoelectric power generation10.1039/D1MA00707F ↗
62. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
63. Doping graphene with boron: a review of synthesis methods, physicochemical characterization, and emerging applications10.1039/C5TA10599D ↗
64. Surface transfer doping of semiconductors10.1016/j.progsurf.2009.06.002 ↗
65. Modulation doping: a strategy for 2D materials electronics10.1021/acs.nanolett.1c02192 ↗
66. Remote modulation doping in van der Waals heterostructure transistors10.1038/s41928-021-00641-6 ↗
67. Recent advances in electrical doping of 2D semiconductor materials: methods, analyses, and applications10.3390/nano11040832 ↗
68. Spatially controlled doping of two-dimensional SnS2 through intercalation for electronics10.1038/s41565-018-0069-3 ↗
69. Controllable doping in 2D layered materials10.1002/adma.202104942 ↗