Microstructure and hydrogen storage properties of Ti1-Ce V0.45Mn1.5 (x = 0, 0.05, 0.10, 0.15, and 0.20) alloys
Source abstract
Abstract
In this work, the microstructure and hydrogen storage properties of Ti 1-xCe xV 0.45Mn 1.5 ( x = 0, 0.05, 0.10, 0.15, and 0.20) alloys have been studied. It shows that the x = 0 alloy consists of a C14 Laves single phase. Moreover, alloys containing Ce can exhibit the CeO 2 phase, whose content rises as Ce content does. Furthermore, CeO 2 phase aggregation causes the alloy to fracture and the hydrogen diffusion channel to enlarge. According to the PCT curves (25 °C), the plateau pressure increases with increasing Ce content, and the hydrogen storage capacity decreases with increasing Ce content due to increase in Ce content which does not absorb hydrogen. And it is also found that increase in Ce substitution for Ti results in better dynamic properties for the alloys. And the dehydrogenation kinetics curves show that hydrogen desorption rate substantially increases with x getting larger. This is because CeO 2 phase acts as the "hydrogen pump" to increase the rate of hydrogen discharge in the alloy, The fastest hydrogenation kinetics are shown, the best hydrogen storage performance is achieved, and the ma ximum hydrogenation is reached in less than 100 s.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Catalysis and Hydrodesulfurization Studies · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Significance of hydrogen energy development and current status of hydrogen storage technology
2. Research progress of hydrogen storage materials
3. Hydrogen storage materials and research progress
4. Research progress of rare earth hydrogen storage materials
5. Research progress of new solid hydrogen storage materials
6. Hydrogen storage property improvement of ball-milled Mg2.3Y0.1Ni alloy with graphene
7. Microstructure characteristics, hydrogen storage thermodynamic and kinetic properties of Mg–Ni–Y based hydrogen storage alloys10.1016/j.ijhydene.2022.06.056 ↗
8. Hydrogen storage properties of V0.3Ti0.3Cr0.25Mn0.1Nb0.05 high entropy alloy10.1016/j.ijhydene.2022.06.013 ↗
9. Effect of Ce substitution for La in hydrogen storage properties and thermodynamics of LaNi4.5Al0.5 alloy
10. Influence of adding graphene on the hydrogen storage thermodynamics and kinetics of as-milled CeMg12-Ni alloy10.1016/j.ijhydene.2022.12.227 ↗
11. Microstructure and thermodynamic and kinetic properties of amorphous nanocrystalline PrMg12 alloy
12. Development of Ti–Cr–Mn–Fe based alloys with high hydrogen desorption pressures for hybrid hydrogen storage vessel application10.1016/j.ijhydene.2013.07.073 ↗
13. Development of Ti1.02Cr2-x-yFexMny (0.6 ≤ x ≤ 0.75, y = 0.25, 0.3) alloys for high hydrogen pressure metal hydride system10.1016/j.ijhydene.2019.03.241 ↗
14. Crystal structure and hydrogen storage properties of Ti-V-Mn alloys10.1016/j.ijhydene.2018.02.009 ↗
15. Effect of phase formation on hydrogen storage properties in Ti-V-Mn alloys by zirconium substitution10.1016/j.energy.2018.10.121 ↗
16. Hydrogen-absorbing alloys with a large capacity for a new energy carrier
17. Neutron diffraction study of deuterium occupancy in Laves phase alloy deuteride Ti0.68Zr0.32MnCrD3.0
18. Impacts of Ce dopants on the hydrogen storage performance of Ti-Cr-V alloys10.1016/j.jallcom.2022.167947 ↗
19. Effect of Mn and Ce addition on hydrogen storage properties of Ti0.27Cr0.33V0.4 alloy
20. Effect of Al on microstructures and hydrogen storage properties of Ti26.5Cr20(V0.45Fe0.085)100−xAlxCe0.5 alloy10.1016/j.jallcom.2009.05.096 ↗
21. Effects of Ce and Cr and heat treatment on structure and hydrogen storage properties of Ti-V-Mn
22. A correlation between the interstitial hole sizes in intermetallic compounds and the thermodynamic properties of the hydrides formed from those compounds10.1016/0022-5088(77)90215-6 ↗
23. Effect of cerium content on microstructure and hydrogen storage performance of Ti24Cr17.5V50Fe8.5Cex (x = 0-1.0) alloys10.1016/S1002-0721(08)60211-2 ↗
24. Interaction of ZrFe2 doped with Ti and Al with hydrogen10.1134/S0020168510040096 ↗
25. The thermodynamic properties of Ti-Zr-Cr-Mn Laves phase alloys10.1016/S0925-8388(01)01409-8 ↗
26. Symbiotic CeH2.73/CeO2 catalyst: a novel hydrogen pump10.1016/j.nanoen.2014.06.026 ↗
27. The surfaces of metal oxides10.1088/0034-4885/48/11/001 ↗
28. Phase transformation, thermodynamics and kinetics property of Mg90Ce5RE5(RE = La, Ce, Nd) hydrogen storage alloys10.1016/j.jmst.2020.02.042 ↗
29. Kinetics of the hydrogen absorption and desorption processes of hydrogen storage alloys: a review10.1007/s12613-021-2337-8 ↗
30. Hydrogen storage properties and cycling degradation of single-phase La0.60R0.15Mg0.25Ni3.45 alloys with A2B7-type superlattice structure10.1016/j.energy.2019.116617 ↗