journal article·2024-03Open access

Investigating the Young's modulus of Cu-Al-Be shape memory alloy using a phase diagram, vibration spectroscopy and ultrasonic waves

Rania Benlachemi, Erick Ogam, Nicholas Ongwen, Amar Boudour, Zine El Abiddine Fellah

Abstract

This work presents a method for determining the effective Young’s modulus (Eeffective) and Poisson ratio of small specimens of a ternary shape memory alloy (SMA), Cu-Al-Be. The alloys were synthesized uniformly and homogeneously using various concentrations of high purity metals and formed into slabs of different geometrical shapes. The phases and fractional quantities of each sub-alloy composing the SMA were determined using SEM/EDS data and the lever rule, and confirmed by matching computed and measured X-ray diffraction peak patterns. The Eeffective was determined using the rule of mixtures, employing elastic moduli obtained from Ab initio (Density functional theory) calculations. To address the challenge of determining Eeffective experimentally for small specimens, high frequency ultrasonic waves and vibration spectroscopy were used. The Eeffective was then used in a 3D finite element model to compute the vibrational spectrum’s resonance peaks, which were found to match those of the experimental vibrational response. The Eeffective was also compared to the pressure wave (P-waves) modulus recovered using non-contact ultrasound waves propagating through the sample’s thickness. Discrepancies mainly occurring for alloys with the β phase were resolved by determining its anisotropic spatial Young’s modulus. Overall, the presented method provides a comprehensive characterization of the mechanical properties of small alloy specimens.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · X-ray Diffraction in Crystallography · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. A. Planes, L.M. Nosa, Vibrational properties of shape-memory alloys(2001). 〈https://www.sciencedirect.com/science/article/pii/S0081194701800059〉.10.1016/S0081-1947(01)80005-9 ↗
2. Reversible martensite transformations in thermal cycled polycrystalline Cu-13.7%Al-4.0%Ni alloy10.1016/j.jallcom.2016.07.210 ↗
3. Observations on stress-induced transformations in niti alloys
4. S. Belkahla, Elaboration et caractérisation de nouveaux alliages àmémoire de forme basse température type cualbe, Ph.D. thesis, INSA, Lyon, France (1990).
5. Grain size and temperature influence on the toughness of a CuAlBe shape memory alloy10.1016/j.msea.2010.09.034 ↗
6. Elaboration and characterization of new low temperature shape memory Cu-Al-Be alloys10.1016/0921-5093(93)90606-F ↗
7. Microstructural characterization of precipitates in Cu10wt%Al0.8wt%Be shape-memory alloy10.1016/j.msea.2006.05.061 ↗
8. Study of different structures derives of β-Cu3Al by means of ab-initio calculations and quasi-harmonic approximation10.1016/j.cocom.2022.e00652 ↗
9. The materials project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
10. Recovery of elastic parameters of cellular materials by inversion of vibrational data10.1016/j.jsv.2007.11.052 ↗
11. Synthesis and mechanical characterization of binary and ternary intermetallic alloys based on Fe-Ti-Al by resonant ultrasound vibrational methods10.3390/ma11050746 ↗
12. Porter · 1992
13. Determination of the young’s modulus in CuAlBe shape memory alloys with different microstructures by impulse excitation technique10.1016/j.msea.2016.08.100 ↗
14. Study by resonant ultrasound spectroscopy of the elastic constants of the β phase in Cu-Al-Ni shape memory alloys10.1016/j.msea.2003.06.004 ↗
15. First-principles study of the effect of aluminum content on the elastic properties of Cu-Al alloys
16. Linear-scaling density-functional theory with gaussian orbitals and periodic boundary conditions: efficient evaluation of energy and forces via the fast multipole method10.1103/PhysRevB.61.16440 ↗
17. Ab initio study of elastic properties of orthorhombic cadmium stannate as a substrate for the manufacture of mems devices
18. A non-linear vibration spectroscopy model for structures with closed cracks10.1016/j.ijnonlinmec.2013.11.003 ↗
19. Elaboration and characterization of new low temperature shape memory Cu-Al-Be alloys10.1016/0921-5093(93)90606-F ↗
20. Certain physical properties of single crystals of tungsten, antimony, bismuth, tellurium, cadmium, zinc, and tin
21. Chapter five - DTA and heat-flux DSC measurements of alloy melting and freezing
22. Temperature calibration and electrical characterization of the differential scanning calorimeter chip ufs1 for the mettler-toledo flash dsc 110.1016/j.tca.2011.01.023 ↗
23. M. Smith, ABAQUS/Standard User’s Manual, Version 6.9, Dassault Systèmes Simulia Corp, United States, 2009.
24. A non-linear vibration spectroscopy model for structures with closed cracks10.1016/j.ijnonlinmec.2013.11.003 ↗
25. Hughes · 2000
26. Identification of the mechanical moduli of flexible thermoplastic thin films using reflected ultrasonic waves: inverse problem10.1016/j.ultras.2017.05.011 ↗
27. Advanced capabilities for materials modelling with quantum ESPRESSO
28. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
29. Density functional theory for calculation of elastic properties of orthorhombic crystals: application to tisi210.1063/1.368733 ↗
30. Factors influencing Al-Cu weld properties by intermetallic compound formation
31. Experimental description of the Al-Cu binary phase diagram10.1007/s11661-019-05286-x ↗
32. Young’s modulus surface and poisson’s ratio curve for cubic metals10.1016/j.jpcs.2007.01.025 ↗
33. Mechanical and electronic properties of Ag3Sn intermetallic compound in lead free solders using ab initio atomistic calculation10.1016/j.mseb.2012.10.003 ↗
34. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
35. Charting the complete elastic properties of inorganic crystalline compounds10.1038/sdata.2015.9 ↗
36. Phase stability study of the shape memory alloy cual-x (x: Be, zn, ti, ni, ag and au) by ab initio calculations
37. Complex metallic surface phases in the al/cu(111) system: an experimental and computational study10.1103/PhysRevB.80.205412 ↗
38. K. Persson, Materials data on AlCu3 (SG:225) by materials project, an optional note(2015). 〈https://materialsproject.org/docs/calculations〉.
39. Multi-physical field simulation of cracking during crystal growth by bridgman method10.3390/ma16083260 ↗
40. Thermo-calc & dictra, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
41. Vesta: a three-dimensional visualization system for electronic and structural analysis10.1107/S0021889808012016 ↗
42. Grain size and pseudoelastic behaviour of a Cu-Al-be alloy10.1016/j.matchar.2006.11.009 ↗
43. Microstructural and elastic properties of stable aluminium-rich tial and tial2 formed phase intermetallics10.1016/j.matlet.2020.129295 ↗
44. Accurate Ab-initio calculation of elastic constants of anisotropic binary alloys: a case of FeAl10.1016/j.ssc.2022.114879 ↗