Influence of process parameters on the quality of powder bed fusion-fabricated Ni-Co-Fe-Mn-Ti high entropy alloy prints using elemental powders
Source abstract
Abstract
Ni-Co-Fe-Mn-Ti high entropy alloys (HEA) were fabricated via powder bed fusion using elemental powders. Based on thermodynamic calculations, 3 alloys were designed with medium to high entropy (from 3 to 5 components) and printed. Additive manufacturing (AM) was performed, while varying the laser power and exposure time (point-by-point exposure laser working mode). The obtained samples were characterised by means of macroscopic observations combined with porosity analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), as well as compression and hardness tests. The varied process parameters and the content of individual alloying elements directly impacted alloy processability and sample properties. We proved that it is possible to produce HEAs (Ni-Co-Fe-Mn-Ti) with low porosity and good chemical homogeneity from elemental powders. By comparing the processes of producing 3-, 4-, and 5-component alloys, it was observed that it is not the quantity of the components but the melting temperatures of the individual elemental powders and their tendency to oxidise that affect obtaining good 3D prints. The most promising results for 5-component HEAs were obtained for 145 µs of laser exposure time combined with laser powers of 250 and 300 W.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Multicomponent and high entropy alloys10.3390/e16094749 ↗
2. High-entropy alloys – a new era of exploitation10.4028/www.scientific.net/MSF.560.1 ↗
3. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
4. Cryogenic behaviour of the Al 5 Ti 5 Co 35 Ni 35 Fe 20 multi-principal component alloy10.1016/j.msea.2019.01.001 ↗
5. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
6. Mechanical properties of the CoCrFeNiMnVxhigh entropy alloys in temperature range 4.2–300 K10.1016/j.jallcom.2016.12.154 ↗
7. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
8. Necessary thermodynamics factors to obtain simple solid solutions in high-entropy alloys from the Al-Ti-Co-Ni-Fe system10.1515/amm-2017-0316 ↗
9. High-entropy alloys10.1038/s41578-019-0121-4 ↗
10. High entropy alloys manufactured by additive manufacturing
11. Additive manufacturing of high entropy alloys: a practical review10.1016/j.jmst.2020.11.029 ↗
12. Laser powder-bed fusion as an alloy development tool: Parameter selection for in-situ alloying using elemental powders
13. Additive manufacturing of a new Fe-Cr-Ni alloy with gradually changing compositions with elemental powder mixes and thermodynamic calculation10.1007/s00170-017-1302-1 ↗
14. Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys – towards rapid alloy screening and design10.1016/j.msea.2017.01.099 ↗
15. Recent advances on high-entropy alloys for 3D printing10.1002/adma.201903855 ↗
16. Resolving the porosity-unmelted inclusion dilemma during in-situ alloying of Ti34Nb via laser powder bed fusion10.1016/j.actamat.2020.116522 ↗
17. Microstructure-property correlations in as-built and heat-treated compositionally graded stainless steel 316L-Inconel 718 alloy fabricated by laser powder bed fusion10.1016/j.msea.2022.144515 ↗
18. Laser powder bed fusion of compositionally graded CoCrMo-Inconel 718
19. Materials and manufacturing renaissance: additive manufacturing of high-entropy alloys10.1557/jmr.2020.140 ↗
20. Additive manufacturing of high-strength CrMnFeCoNi-based High Entropy Alloys with TiC addition10.1016/j.intermet.2019.04.005 ↗
21. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys10.1080/14686996.2017.1361305 ↗
22. Additive manufacturing of high-entropy alloys: a review10.3390/e20120937 ↗
23. Effect of hot isostatic pressing on the microstructure and mechanical properties of additive manufactured AlxCoCrFeNi high entropy alloys10.1016/j.msea.2018.07.036 ↗
24. Additive manufacturing: technology, applications and research needs10.1007/s11465-013-0248-8 ↗
25. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
26. Viewpoint: metallurgical aspects of powder bed metal additive manufacturing10.1007/s10853-015-9479-x ↗
27. The use of high-entropy alloys in additive manufacturing10.1016/j.scriptamat.2014.11.037 ↗
28. Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: microstructure, anisotropic mechanical response, and multiple strengthening mechanism10.1016/j.jallcom.2019.07.106 ↗
29. Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property10.1016/j.jallcom.2018.02.298 ↗
30. Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting10.1016/j.scriptamat.2018.05.015 ↗
31. Structure and mechanical properties of a FeCoCrNi high-entropy alloy fabricated via selective laser melting10.1016/j.intermet.2020.106963 ↗
32. Additive manufactured high entropy alloys: a review of the microstructure and properties10.1016/j.matdes.2022.110875 ↗
33. Fabricating CoCrFeMnNi high entropy alloy via selective laser melting in-situ alloying10.1016/j.jmst.2020.01.002 ↗
34. Fabricating homogeneous FeCoCrNi high-entropy alloys via SLM in situ alloying10.3390/met11060942 ↗
35. Rapid alloy development of extremely high-alloyed metals using powder blends in laser powder bed fusion10.3390/ma12101706 ↗
36. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting10.1007/s00170-014-6297-2 ↗
37. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
38. Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy10.1016/j.actamat.2020.116505 ↗
39. Microstructure and enhanced strength of laser aided additive manufactured CoCrFeNiMn high entropy alloy10.1016/j.msea.2018.12.005 ↗
40. Microstructures and mechanical properties of C-containing FeCoCrNi high-entropy alloy fabricated by selective laser melting10.1016/j.intermet.2018.01.002 ↗
41. Effects of annealing on the structure and mechanical properties of FeCoCrNi high-entropy alloy fabricated via selective laser melting
42. Comparison of microstructure and properties of CoCrFeMnNi high-entropy alloy from selective laser melting and directed energy deposition processes10.1016/j.promfg.2021.06.046 ↗
43. Hierarchical microstructure of laser powder bed fusion produced face-centered-cubic-structured equiatomic CrFeNiMn multicomponent alloy10.3390/ma13204498 ↗
44. Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder10.1016/j.matdes.2018.107576 ↗
45. Precipitation behavior of selective laser melted FeCoCrNiC0.05 high entropy alloy10.1016/j.intermet.2018.12.001 ↗
46. High strength and ductility AlCrFeNiV high entropy alloy with hierarchically heterogeneous microstructure prepared by selective laser melting10.1016/j.jallcom.2019.152196 ↗
47. Main defects observed in aluminum alloy parts produced by SLM: From causes to consequences
48. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
49. The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS10.1016/j.matdes.2020.108852 ↗