Enhanced performance of ZnO/NiO bulk heterojunction based low-temperature solid oxide fuel cells realized by the addition of MgO insulator
Source abstract
Abstract
Due to built-in electric field of p-n bulk heterojunction can block electron transfer and facilitate ion transport, p-n bulk heterojunction based low temperature solid oxide fuel cell (LT-SOFCs) can achieve high open circuit voltage (OCV) and output power density in the LT region. Intrinsic layer can enhance the built-in electric field of the p-n heterojunction, thereby enhancing the capability of the heterojunction to regulate carrier transport and further improving cell performance. In this work, MgO insulator serves as the intrinsic layer for ZnO/NiO bulk heterojunction to enhance the built-in electric field of the heterojunction and improve the LT-SOFC performances. At 550 ℃, the OCV and maximun power density (MPD) of the fuel cell based on ZnO/MgO/NiO heterojunctions can reach 1.09 V and 786 mW/cm 2, respectively, which are significantly higher than those of ZnO/NiO based fuel cell (OCV of 0.9 V and MPD of 561 mW/cm 2). The above results indicate that enhancing the built-in electric field of p-n heterojunction by adding intrinsic layer is a feasible method to improve the performance of p-n heterojunction based LT-SOFCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Shaping triple-conducting semiconductor BaCo0.4Fe0.4Zr0.1Y0.1O3-δ into an electrolyte for low-temperature solid oxide fuel cells
2. The semiconductor SrFe0.2Ti0.8O3-δ-ZnO heterostructure electrolyte fuel cells10.1016/j.ijhydene.2019.09.145 ↗
3. La0.1SrxCa0.9-xMnO3-δ-Sm0.2Ce0.8O1.9 composite material for novel low temperature solid oxide fuel cells10.1016/j.ijhydene.2017.05.158 ↗
4. The electrolyte-layer free fuel cell using a semiconductor-ionic Sr2Fe1.5Mo0.5O6-δ-Ce0.8Sm0.2O2-δ composite functional membrane10.1016/j.ijhydene.2017.08.113 ↗
5. Fast ionic conduction and rectification effect of NaCo0.5Fe0.5O2-CeO2 nanoscale heterostructure for LT-SOFC electrolyte application10.1016/j.jallcom.2022.166565 ↗
6. Charge separation and transport in La0.6Sr0.4Co0.2Fe0.8O3-δ and ion-doping ceria heterostructure material for new generation fuel cell10.1016/j.nanoen.2017.05.003 ↗
7. Ni/NiO exsolved Perovskite La0.2Sr0.7Ti0.9Ni0.103-δ for semiconductor-ionic fuel cells: roles of electrocatalytic activity and physical junctions10.1021/acsami.2c16002 ↗
8. Demonstration of high-performance and stable metal-supporting semiconductor-ionic fuel cells10.1016/j.jpowsour.2023.233325 ↗
9. Junction and energy band on novel semiconductor-based fuel cells10.1016/j.isci.2021.102191 ↗
10. Approaching durable single-layer fuel cells: promotion of electroactivity and charge separation via nanoalloy redox exsolution10.1021/acsami.9b08448 ↗
11. Demonstrating the dual functionalities of CeO2–CuO composites in solid oxide fuel cells10.1016/j.ijhydene.2020.04.272 ↗
12. Electrochemical and electrical properties of doped CeO2-ZnO composite for low-temperaturesolid oxide fuel cell applications10.1016/j.jpowsour.2018.04.096 ↗
13. The heterogeneous electrolyte of CuFeO2 nano-flakes composited with flower-shaped ZnO for advanced solid oxide fuel cells10.1016/j.ijhydene.2018.04.020 ↗
14. Effects of P-N and N-N heterostructures and band alignment on the performance of low-temperature solid oxide fuel cells10.1016/j.ijhydene.2020.06.103 ↗
15. Optical and photocatalytic properties of single crystalline ZnO at the air-liquid interface by an aminolytic reaction10.1021/la203006n ↗
16. Ultraviolet-emitting ZnO nanowhiskers prepared by a vapor transport process on prestructured surfaces with self-assembled polymers10.1063/1.1563845 ↗
17. Energy band alignment of SiO2/ZnO interface determined by x-ray photoelectron spectroscopy10.1063/1.3204028 ↗
18. Valence-band offset of p-NiO/n-ZnO heterojunction measured by X-ray photoelectron spectroscopy10.1016/j.physleta.2011.03.021 ↗
19. NiO films consisting of vertically aligned cone-shaped NiO rods
20. Accel erated proton transport based on a p-i-n heterostructure membrane for low-temperature solid oxide fuel cells10.1021/acsaem.1c02773 ↗
21. Bandgap engineering of ZnO by alloying with MgO10.1149/06104.0387ecst ↗
22. Ultrawide-bandgap amorphous MgGaO: nonequilibrium growth and vacuum ultraviolet application10.1002/adom.201801272 ↗
23. Self-powered visible-blind UV photodetectors based on p-NiO nanoflakes/n-ZnO nanorod arrays with an MgO interfacial layer10.1039/C9TC01179J ↗
24. Ultralow-threshold laser realized in zinc oxide10.1002/adma.200802907 ↗
25. ZnO-based ultraviolet avalanche photodetectors10.1088/0022-3727/46/30/305105 ↗
26. Visible-blind ultraviolet photodetector based on double heterojunction of n-ZnO/insulator-MgO/p-Si
27. A new energy conversion technology based on nano-redox and nano-device processes10.1016/j.nanoen.2013.05.001 ↗
28. A nanoscale perspective on solid oxide and semiconductor membrane fuel cells: Materials and technology
29. Ionic conduction of ceramic/molten salt composite electrolyte in fuel cell with lithium compound as electrode10.1149/1945-7111/ac908a ↗
30. Investigation of layered Ni0.8Co0.15Al0.05LiO2 in electrode for low-temperature solid oxide fuel cells10.1016/j.ijhydene.2017.11.056 ↗
31. Effect of Li2CO3 and LiOH on the ionic conductivity of BaCe0.9Y0.1O3 electrolyte in SOFCs with a lithium compound electrode10.1016/j.ijhydene.2020.04.192 ↗