journal article·2023-12

Low-oxygen Ti-6Al-4V alloy powder synthesized by an aluminothermic reduction combined with deoxidation process

Kun Zhao, Xiaorui Huang, Yaowu Wang, Yuehong Zhang, Kejia Liu

Publisher page

Abstract

A novel aluminothermic reduction combined with deoxidation process was developed in this research to prepare low-oxygen Ti-6Al-4V alloy powder. First, with Al and Al-V alloy powders as reducing agents and additives, crude Ti-6Al-4V alloy powder was fabricated by reduction-vacuum distillation using Na 2TiF 6 as a titanium source. The aluminothermic reduction process was investigated by TG-DSC technique, and the thermal kinetic parameters of the reaction process were calculated by the Kissinger method. The oxygen content of the crude Ti-6Al-4V alloy powder with a coral-like porous structure was detected as 0.366 %. Furthermore, the existential states of the oxygen contained in the crude product powder was analyzed using XPS. The results indicated that the oxygen existed in three chemical states: metal oxides, defective oxygen, and adsorbed oxygen. Therefore, the deoxygenation of the crude Ti-6Al-4V alloy powder with calcium as a deoxidizer was carried out at 900 °C. As a result, the final Ti-6Al-4V powder with an oxygen content of approximately 822 ppm could be obtained. The contents of Ti, Al, V, Fe, and O in the obtained Ti-6Al-4V powders met the requirements of GB/T 3620.1−2016. This work had demonstrated the feasibility of preparing Ti-6Al-4V alloy powder by the novel aluminothermic reduction combined with deoxidation process.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying10.1016/j.compositesb.2022.110399 ↗
2. High-strength titanium alloys for aerospace engineering applications: a review on melting-forging process10.1016/j.msea.2022.143260 ↗
3. Machinability of additively manufactured titanium alloys: a comprehensive review10.1016/j.jmapro.2022.01.007 ↗
4. A review of the metastable omega phase in beta titanium alloys: the phase transformation mechanisms and its effect on mechanical properties10.1080/09506608.2022.2036401 ↗
5. Evaluation of wear mechanism between TC4 titanium alloys and self-lubricating fabrics
6. High energy laser shock peening of Ti6Al4V alloy without any protective coating10.1016/j.apsusc.2023.158110 ↗
7. Ti-6Al-4V hollow-strut lattice materials by laser powder bed fusion
8. Improving the high cycle fatigue property of Ti6Al4V ELI alloy by optimizing the surface integrity through electric pulse combined with ultrasonic surface rolling process10.1016/j.jmst.2023.06.029 ↗
9. Multifunctional antibacterial chitosan-based hydrogel coatings on Ti6Al4V biomaterial for biomedical implant applications
10. The production of ductile titanium10.1149/1.3071290 ↗
11. Production technology of titanium by Kroll process
12. Preparing low-oxygen Ti-6Al-4V alloy powder through direct reduction of oxides and its synergistic reaction mechanism10.1007/s11771-022-5054-1 ↗
13. Microstructural optimization and mechanical enhancement of SLM Ti6Al4V TPMS scaffolds through vacuum annealing treatment10.1016/j.jallcom.2022.167524 ↗
14. Arc distribution during the vacuum arc remelting of Ti-6Al-4V10.1007/s11663-012-9760-1 ↗
15. Metallurgical investigation and root cause analysis of defects in a titanium alloy (Ti6Al4V) propellant tank ring10.1007/s11668-023-01712-w ↗
16. Microstructural, mechanical, electrochemical, and biological studies of an electron beam melted Ti-6Al-4V alloy
17. Multi-stage hot deformation and dynamic recrystallization behavior of low-cost Ti-Al-V-Fe alloy via electron beam cold hearth melting10.1016/j.jmrt.2022.07.035 ↗
18. Microstructure, mechanical properties, and strengthening mechanism of high performance Ti-6Al-4V alloy by pressureless sintering and hot extrusion10.1016/j.jallcom.2023.169990 ↗
19. Development of microstructural heterogeneities and dynamic restoration activity during ring rolling of Ti-6Al-4V alloy and its tensile response10.1016/j.jallcom.2023.171241 ↗
20. Powder metallurgy of titanium alloys: a brief review10.1016/j.jallcom.2023.171030 ↗
21. Preparation of millimeter-scale hard layer on the surface of titanium alloy via self-propagating high temperature synthesis combined with hot pressing sintering process10.1016/j.jmrt.2022.10.166 ↗
22. Dense layer, microstructure, and mechanical performances of Ti-6Al-4V alloy prepared by metal injection molding10.1007/s00170-023-11376-3 ↗
23. Mechanisms of heat treatment and ductility improvement of high-oxygen Ti-6Al-4V alloy fabricated by metal injection molding10.1016/j.msea.2022.142924 ↗
24. Review of internal and external surface finishing technologies for additively manufactured metallic alloys components and new frontiers10.1007/s40964-023-00412-z ↗
25. Microstructural development during additive manufacturing of biomedical grade Ti-6Al-4V alloy by three-dimensional binder jetting: material aspects and mechanical properties10.1007/s00170-023-11661-1 ↗
26. Achieving high strength and ductility in selective laser melting Ti-6Al-4V alloy by laser shock peening10.1016/j.jallcom.2021.163335 ↗
27. Role of laser remelting and heat treatment in mechanical and tribological properties of selective laser melted Ti6Al4V alloy10.1016/j.jallcom.2021.163207 ↗
28. Strength enhancement of a bi-lamellar PM Ti-6Al-4V alloy without sacrificing ductility by Al partitioning and twinning-induced plasticity effect10.1016/j.msea.2021.142368 ↗
29. Tailoring microstructure of additively manufactured Ti6Al4V titanium alloy using hybrid additive manufacturing technology
30. Manufacturing methods induced property variations in Ti6Al4V using high-speed machining and additive manufacturing (AM)10.3390/met13020287 ↗
31. Directed-energy deposition of Ti-6Al-4V alloy using fresh and recycled feedstock powders under reactive atmosphere
32. Surface chemistry in Ti-6Al-4V feedstock as influenced by powder reuse in electron beam additive manufacturing10.1016/j.apsusc.2022.154280 ↗
33. Effect of hydrogen on the microstructure and mechanical properties of high temperature deformation of Ti6Al4V additive manufactured10.1016/j.ijhydene.2022.12.350 ↗
34. Ultrastrong Ti-6Al-4V composite with hierarchical microstructure through two-step ball milling and pressureless sintering10.1016/j.scriptamat.2023.115676 ↗
35. In situ fabrication of spherical oxide dispersion strengthened Ti powder through gas atomization10.1016/j.jmrt.2023.05.097 ↗
36. Fabrication of spherical Ti-6Al-4V powder by RF plasma spheroidization combined with mechanical alloying and spray granulation10.1016/j.apt.2021.11.031 ↗
37. Synthesis of Ti-6Al-4V alloy by the electrolysis of molten CaCl2+CaO10.2320/jinstmet.72.921 ↗
38. Electrochemical deoxidation of titanium and its alloy using moltenmagnesium chloride10.1007/s11663-016-0792-9 ↗
39. Cold compaction study of Armstrong Process® Ti-6Al-4V powders10.1016/j.powtec.2011.08.007 ↗
40. Preparing low-oxygen Ti-6Al-4V alloy powder through direct reduction of oxides and its synergistic reaction mechanism10.1007/s11771-022-5054-1 ↗
41. Comparison of deoxidation capability of solid solution and intermetallic titanium alloy powders deoxidized by calcium vapor10.1016/j.jallcom.2020.154220 ↗
42. Surface reaction and deoxidation mechanism of titanium powder deoxidized by calcium in atmospheric pressure argon10.1016/j.apt.2022.103729 ↗
43. Surface characterization of Ti and Ti-6Al-4V alloy by Ca vapor deoxidation: relation between surface morphology and deoxidation reaction10.1016/j.apsusc.2022.153098 ↗
44. Fabrication of Ti-6Al-4V alloy powder by a novel sintering-deoxygenation process10.1016/j.jallcom.2022.168113 ↗
45. Fabrication of Ti-Al intermetallics by a two-stage aluminothermic reduction process using Na2TiF610.1016/j.intermet.2017.02.016 ↗
46. Mechanism and kinetic analysis of vacuum aluminothermic reduction for preparing TiAl intermetallics powder10.1016/j.jallcom.2020.157546 ↗
47. Preparation of Ti-6Al-4V alloy powder by aluminothermic reduction
48. Diffusion in mechanical alloying10.1016/S0924-0136(96)02826-9 ↗
49. Homer Kissinger and the Kissinger equation10.1016/j.tca.2012.04.008 ↗
50. Three methods for application of data from a volumetric method to the Kissinger equation to obtain activation energy10.3390/mi13111809 ↗
51. Reaction kinetics in differential thermal analysi10.1021/ac60131a045 ↗
52. Design of high strength and wear-resistance β-Ti alloy via oxygen-charging10.1016/j.actamat.2022.117686 ↗
53. Enhancement of Ti-6Al-4V powder surface properties for cold spray deposition using fluidized gas-nitriding technique10.1016/j.matlet.2021.129429 ↗
54. Evaluation of laser cladding of Ti6Al4V-ZrO2-CeO2 composite coating on Ti6Al4V alloy substrate10.1016/j.surfcoat.2023.129988 ↗
55. Fabrication of spherical Ti-6Al-4V powder for additive manufacturing by radio frequency plasma spheroidization and deoxidation using calcium10.1016/j.jmrt.2020.10.054 ↗
56. Preparation of low oxygen content alloy powder from Ti binary alloy scrap by hydrogenation–dehydrogenation and deoxidation process10.1016/j.jallcom.2014.01.033 ↗