journal article·2023-12

Ultra-short pulsed laser ablation of decagonal AlCoNi and AlCoCuNi quasicrystals

Bibek Kumar Singh, Dipanjan Banerjee, A. Mangababu, Yagnesh Shadangi, N.K. Mukhopadhyay, Rajesh Rawat, A.P. Pathak, S. Venugopal Rao, Archana Tiwari, A. Tripathi

Publisher page

Abstract

Al 70Co 20Ni 10 and Al 70Co 15Cu 10Ni 5 (at%) decagonal quasicrystals (DQCs) were subjected to femtosecond laser ablation at a laser wavelength of 800 nm, in deionized water (DI). The generated nanoparticles (NPs) confined within the liquid medium were studied for optical and structural properties. The structural analysis revealed the retention of the targets phase in the NPs. In case of Al 70Co 20Ni 10, formation of Al 3Ni 2 phase was confirmed through the SAED patterns and HRTEM micrographs. Contrary to this, the formation of Al-Ni phase was not observed in Al 70Co 15Cu 10Ni 5. This is attributed to the presence of Cu in the latter sample, which restricts the mixing of Ni with Al. The HRTEM micrographs in both cases showed that Al 2O 3 was present at the edges of the NPs. The optical analysis confirmed the formation of Al 2O 3 in both cases. However, in the case of Al 70Co 15Cu 10Ni 5, a very weak signal corresponding to CuO was detected. This is attributed to the diffusion of Cu along with Al at the edge. The ablated region of the target’s surface was studied for the formation of laser-induced periodic surface structures (LIPSS) also known as ripples, and the type of ripples formed was identified.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser-Ablation Synthesis of Nanoparticles · Quasicrystal Structures and Properties · Mineralogy and Gemology Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (81)

Show source-provided references
1. Metallic phase with long-range orientational order and no translational symmetry10.1103/PhysRevLett.53.1951 ↗
2. Quasicrystal stability in complex aluminum alloys: insights from first principles models on structural motifs in crystalline approximants10.1016/j.scriptamat.2022.115046 ↗
3. Quasicrystals: a new class of structurally complex intermetallics10.1007/s41745-022-00293-1 ↗
4. Towards applications of quasicrystals10.1016/0921-5093(94)90177-5 ↗
5. Electronic properties of quasicrystals an experimental review10.1080/00018739200101513 ↗
6. E.T. Akinlabi, R.M. Mahamood, S.A. Akinlabi, Advanced manufacturing techniques using laser material processing, IGI Global, 2016.10.4018/978-1-5225-0329-3 ↗
7. Properties-and applications of quasicrystals and complex metallic alloys10.1039/c2cs35110b ↗
8. A stable quasicrystal in Al-Cu-Fe system10.1143/JJAP.26.L1505 ↗
9. Fabrication of Al–Cu–Fe quasicrystal reinforced 6082 aluminium matrix nanocomposites through mechanical milling and spark plasma sintering10.1016/j.jallcom.2020.154258 ↗
10. Powder metallurgical processing of Sn-reinforced Al-Cu-Fe quasicrystals: structure, microstructure and toughening behavior
11. Dodecagonal quasicrystals in mesoporous silica: a new route from hard-to soft-sphere packings10.1021/acs.chemmater.0c01382 ↗
12. Tailoring cubic and dodecagonal quasicrystalline mesophases of mesoporous organosilica nanoparticles and core/shell structure10.1016/j.msec.2019.01.008 ↗
13. Investigation of optical density in photonic quasicrystals for filtering applications: Effect of composite layers10.1063/5.0087006 ↗
14. S. Ryabtsev, O. Sukhova, Ion-plasma deposition of thin quasicrystalline Al-Cu-Fe and Al-Cu-Co films.2020.10.46813/2020-126-145 ↗
15. Additive manufacturing of a quasicrystal-forming Al95Fe2Cr2Ti1 alloy with remarkable high-temperature strength and ductility
16. Nanosecond pulsed laser ablation of Al–Cu–Fe quasicrystalline material: effects of solvent and fluence10.1016/j.jallcom.2020.157871 ↗
17. Influence of LiH addition on electrochemical hydrogen storage performance of Ti45Zr38Ni17 quasicrystal10.1016/j.solidstatesciences.2018.11.002 ↗
18. Improved electrochemical hydrogen storage performance of Ti49Zr26Ni25 quasicrystal alloy by doping with mesoporous α-Fe2O3 particles10.1016/j.ijhydene.2018.02.149 ↗
19. Structural and corrosion behavior investigation of novel nano-quasicrystalline Al-Cr-Fe reinforced Al-matrix composites produced by ARB process10.1016/j.jallcom.2021.161774 ↗
20. Liquid exfoliation of decagonal quasicrystals and its light out-coupling performance in organic light-emitting devices10.1002/adpr.202000042 ↗
21. Quasi crystal al (1xxx)/carbonised coconut shell nanoparticles: synthesis and characterisation10.1557/adv.2018.369 ↗
22. Mechanistic understanding of the superior catalytic effect of Al65Cu20Fe15 quasicrystal on de/re-hydrogenation of NaAlH4
23. Utilization of two-dimensional multicomponent Quasicrystal for NO2 gas detection10.1016/j.matchemphys.2023.127449 ↗
24. Synthesis of Al–Cr decagonal quasicrystal nanoparticles and their temperature of phase transformation to stable crystal phase10.1016/j.physe.2005.11.002 ↗
25. Liquid exfoliation of icosahedral quasicrystals10.1002/adfm.201801181 ↗
26. Structure, electrical and thermal transport properties of Sn reinforcedAl-Cu-Fe quasicrystalline matrix composite prepared by mechanical milling and subsequent annealing10.1016/j.jallcom.2023.170586 ↗
27. Ultra-short pulse laser ablation of Al70Cu20Fe10 alloy: Nanoparticles generation and thin films deposition10.1016/j.tsf.2008.09.095 ↗
28. Role and importance of nanoparticles in femtosecond pulsed laser ablation deposition of Al–Cu–Fe quasicrystal10.1016/j.cplett.2007.02.074 ↗
29. Formation of Cu-Ni enriched phases during laser processing of non-equiatomic AlSiCrMnFeNiCu high entropy alloy nanoparticles10.1016/j.jallcom.2022.166905 ↗
30. Design and perspective of amorphous metal nanoparticles from laser synthesis and processing10.1039/D1CP00701G ↗
31. Limited elemental mixing in nanoparticles generated by ultrashort pulse laser ablation of AgCu bilayer thin films in a liquid environment: atomistic modeling and experiments10.1021/acs.jpcc.0c09970 ↗
32. Kinetically-controlled laser-synthesis of colloidal high-entropy alloy nanoparticles10.1039/C9RA03254A ↗
33. R. Teghil, L. D’Alessio, A. Santagata, A.R. Villani, P. Villani, A. Galasso, D.J. Sordelet, Pulsed laser ablation and deposition of quasicrystals, in: ALT’02 International Conference on Advanced Laser Technologies, vol. 5147, SPIE, 2003, 393–403.10.1117/12.543726 ↗
34. General synthesis of high-entropy alloy and ceramic nanoparticles in nanoseconds10.1038/s44160-021-00004-1 ↗
35. Laser-generated high entropy metallic glass nanoparticles as bifunctional electrocatalysts10.1007/s12274-021-3804-2 ↗
36. Hierarchical microstructures with high spatial frequency laser induced periodic surface structures possessing different orientations created by femtosecond laser ablation of silicon in liquids10.29026/oea.2019.190002 ↗
37. Higher suitability of NbMoTaW over its elemental metals for laser induced periodic surface structure/particle-aggregate UV-to-MIR ultrabroadband absorber10.1016/j.scriptamat.2023.115276 ↗
38. Structure and corrosion of quasicrystalline cast Al–Co–Ni and Al–Fe–Ni alloys in aqueous NaCl solution
39. The Al3Ni2 structure as approximant of quasicrystals
40. Metastable formation of decagonal quasicrystals during solidification of undercooled Al-Ni melts: in situ observations by synchrotron radiation10.1209/0295-5075/86/36002 ↗
41. First-time synthesis of an unparalleled Al72Cr15Ni13 decagonal quasicrystalline phase with the help of mechanical alloying and annealing procedures: a comparative study10.1016/j.powtec.2021.05.026 ↗
42. Structural variation and phase transformations of decagonal quasicrystals in the al-ni-co system10.1080/095008396180164 ↗
43. Structural characterization of rapidly solidified Al71Ni24Fe5 alloy
44. On the formation of AlNiCo nano-quasicrystalline phase during mechanical alloying through electroless Ni-P plating of starting particles10.3390/ma12142294 ↗
45. Least path criterion (LPC) for unique indexing in a two-dimensional decagonal quasilattice10.1107/S0108767302008747 ↗
46. Synthesis of nano-quasicrystalline Al70Ni15Co15 decagonal phase through high energy ball milling10.1016/j.jnoncrysol.2003.11.013 ↗
47. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
48. Laser synthesis and processing of colloids: fundamentals and applications10.1021/acs.chemrev.6b00468 ↗
49. Perspective on how laser-ablated particles grow in liquids10.1007/s11433-017-9035-8 ↗
50. Metastable alloy nanoparticles, metal-oxide nanocrescents and nanoshells generated by laser ablation in liquid solution: influence of the chemical environment on structure and composition10.1039/C5CP00279F ↗
51. Large scale synthesis of copper nickel alloy nanoparticles with reduced compressibility using arc thermal plasma process10.1038/s41598-021-86776-0 ↗
52. On the miscibility gap of Cu-Ni system10.1016/j.actamat.2018.01.038 ↗
53. Expanding quasiperiodicity in soft matter: supramolecular decagonal quasicrystals by binary giant molecule blends10.1073/pnas.2115304119 ↗
54. A review of transmission electron microscopy of quasicrystals—how are atoms arranged?10.3390/cryst6090105 ↗
55. Laser synthesis of aluminium nanoparticles in biocompatible polymer solutions10.1007/s00339-014-8487-z ↗
56. Synthesis, characterizations, antibacterial and photoluminescence studies of solution combustion-derived α-Al2O3 nanoparticles10.1016/j.jascer.2015.07.001 ↗
57. Chemical and morphological evolution of copper nanoparticles obtained by pulsed laser ablation in liquid10.1021/acs.jpcc.9b03958 ↗
58. Production of copper nanoparticles exhibiting various morphologies via pulsed laser ablation in different solvents and their catalytic activity for reduction of toxic nitroaromatic compounds10.1016/j.jhazmat.2020.124412 ↗
59. Synthesis of metal-oxide (Al2O3) nanoparticles by using autoclave for the efficient absorption of heavy metal ions
60. Nickel sub-lattice effects on the optical properties of ZnO nanocrystals
61. Effects of copper: aluminum ratio in CuO/Al2O3 nanocomposite: electrochemical hydrogen storage capacity, band gap and morphology10.1016/j.ijhydene.2016.06.191 ↗
62. High stable with efficient dye-sensitized solar cell-based Al2O3/graphene hybrid photoanode fabricated by simple household microwave irradiation technique
63. Characterization, optical and luminescence features of cobalt ions in multi-component PbOAl2O3TeO2GeO2SiO2 glass ceramics10.1016/j.optmat.2018.11.050 ↗
64. Electrochromic and photoluminescence properties of cobalt oxide thin films prepared by spray pyrolysis10.1080/00387010.2018.1556221 ↗
65. Structural, optical, magnetic and half-metallic studies of cobalt doped ZnS thin films deposited via chemical bath deposition10.1039/C5TC00557D ↗
66. Luminescent studies of brucite based layered materials
67. Insights on photocatalytic dye inactivation and antimicrobial activity of pH-dependent facile synthesised copper oxide nanoparticles10.1007/s00339-021-05036-0 ↗
68. Synthesis of CuO hollow nanoparticles using laser ablation: effect of fluence and solvents10.1007/s00339-020-3403-1 ↗
69. Effects on surface-enhanced Raman scattering from copper nanoparticles synthesized by laser ablation10.1080/10420150.2019.1701465 ↗
70. Solvents effect on the morphology and stability of Cu/Cuo nanoparticles synthesized at high fluence laser ablation
71. Maxwell meets Marangoni—a review of theories on laser-induced periodic surface structures10.1002/lpor.202000215 ↗
72. Fundamentals of scanning surface structuring by ultrashort laser pulses: from electron diffusion to final morphology10.1002/adpr.202200045 ↗
73. Structure formation on the surface of indium phosphide irradiated by femtosecond laser pulses10.1063/1.1827919 ↗
74. Dual process strategy to increase the usable power for laser-milling
75. Texturing metal surface with MHz ultra-short laser pulses10.1364/OE.25.018131 ↗
76. Tailoring the surface morphology of Ni at the nanometric scale by ultrashort laser pulses10.1007/s00339-022-06046-2 ↗
77. From ripples to spikes: a hydrodynamical mechanism to interpret femtosecond laser-induced self-assembled structures10.1103/PhysRevB.92.041405 ↗
78. Liquid vortexes and flows induced by femtosecond laser ablation in liquid governing formation of circular and crisscross LIPSS10.29026/oea.2022.210066 ↗
79. Advances in ultrafast laser structuring of materials at the nanoscale10.1515/nanoph-2020-0310 ↗
80. Effects of electron-phonon coupling and electron diffusion on ripples growth on ultrafast-laser-irradiated metals10.1063/1.3676221 ↗
81. Ultrafast dynamics of femtosecond laser-induced periodic surface pattern formation on metals10.1063/1.2146067 ↗