Temperature-dependent chemical incompatibility between NiO-YSZ anode and alkaline earth metal oxides: Implications for surface decoration of SOFC anode
Source abstract
Abstract
Alkaline earth metal oxides (AEMOs) have been recognized one of the most effective modifiers to alleviate coking issue of Ni-based anodes of solid oxide fuel cells (SOFCs). Nevertheless, the interaction between AEMOs and Ni-based anode matrix may also degrade the cell performance. In this work, the chemical compatibility between AMEOs and NiO-YSZ anode as well as their possible consequences were systematically investigated from both experimental and theoretical perspectives. XRD analyses reveal that the chemical compatibility of AEMOs with NiO-YSZ is temperature-dependent. The formation of alkaline earth metal (AEM) zirconates is detrimental to the oxygen ionic conductivity while the formation of AEMO-NiO solid solution suppresses the catalytic activity and electrical conductivity of Ni-YSZ anodes. The Ca, Sr and Ba enrichment in YSZ are observed, indicating the higher affinity of YSZ to AEMOs than that of NiO. Two potential strategies to preferentially deposit AEMO on Ni particles without chemical interaction are proposed. It is anticipated the findings in this work can provide guidance for designing Ni-based SOFC anode with both high-performance and anti-coking.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Running on natural gas10.1038/23144 ↗
2. Location-dependent effect of nickel on hydrogen dissociation and diffusion on Mg (0001) surface: insights into hydrogen storage material design10.1016/j.jma.2021.03.002 ↗
3. Comprehensive investigation of methane conversion over Ni(111) surface under a consistent DFT framework: Implications for anti-coking of SOFC anodes10.1016/j.apsusc.2019.02.084 ↗
4. Enhancing coking resistance of Ni/YSZ electrodes: in situ characterization, mechanism research, and surface engineering10.1016/j.nanoen.2019.05.006 ↗
5. Locating the rate-limiting step of hydrogen conversion on Sr2Fe1.5Mo0.5O6 (0 0 1) surface: implications for efficient SOFC anode design10.1016/j.apsusc.2022.153513 ↗
6. Carbon-resistant Ni-Zr0.92Y0.08O2-δ supported solid oxide fuel cells using Ni-Cu-Fe alloy cermet as on-cell reforming catalyst and mixed methane-steam as fuel10.1016/j.jpowsour.2015.11.029 ↗
7. Nano-composite structural Ni–Sn alloy anodes for high performance and durability of direct methane-fueled SOFCs10.1039/C4TA06037G ↗
8. Sn-doped Ni/YSZ anode catalysts with enhanced carbon deposition resistance for an intermediate temperature SOFC10.1016/j.apcatb.2010.03.029 ↗
9. Sm0.2(Ce1−xTix)0.8O1.9 modified Ni–yttria-stabilized zirconia anode for direct methane fuel cell10.1016/j.jpowsour.2011.01.062 ↗
10. Effect of Sm0.2Ce0.8O1.9 on the carbon coking in Ni-based anodes for solid oxide fuel cells running on methane fuel10.1016/j.ijhydene.2011.11.148 ↗
11. Suppressed carbon deposition behavior in nickel/yittria-stablized zirconia anode with SrZr0.95Y0.05O3−α in dry methane fuel10.1149/1.3256122 ↗
12. Barium oxide promoted Ni/YSZ solid-oxide fuel cells for direct utilization of methane10.1039/C3TA12381B ↗
13. The influence of incorporating MgO into Ni-based cermets by plasma spraying on anode microstructural and chemical stability in dry methane10.1016/j.jpowsour.2012.06.106 ↗
14. Study on steam reforming of CH4 and C2 hydrocarbons and carbon deposition on Ni-YSZ cermets10.1016/S0378-7753(02)00471-8 ↗
15. Electrostatic force microscopic characterization of early stage carbon deposition on nickel anodes in solid oxide fuel cells10.1021/acs.nanolett.5b02237 ↗
16. Fabrication and characterization of GDC electrolyte/electrode integral SOFC with BaO/Ni-GDC anode10.1016/j.materresbull.2013.11.034 ↗
17. Surface-scale affinity and adsorption selectivity of alkaline earth metal oxides to H2O and CO2: insight into SOFC anode modification10.1016/j.apsusc.2019.144333 ↗
18. Improvement of Ni/SDC anode by alkaline earth metal oxide addition for direct methane–solid oxide fuel cells10.1016/j.elecom.2009.05.042 ↗
19. Enhanced coking tolerance of a MgO-modified Ni cermet anode for hydrocarbon fueled solid oxide fuel cells10.1039/C6TA08031F ↗
20. Comparing in situ carbon tolerances of Sn-infiltrated and BaO-infiltrated Ni-YSZ cermet anodes in solid oxide fuel cells exposed to methane10.1021/acs.jpcc.5b01345 ↗
21. Mitigation of carbon deposits formation in intermediate temperature solid oxide fuel cells fed with dry methane by anode doping with barium10.1016/j.jpowsour.2009.01.096 ↗
22. Carbon monoxide fueled cone-shaped tubular solid oxide fuel cell with (Ni0.75Fe0.25-5 % MgO)/YSZ anode10.1149/2.028301jes ↗
23. Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells10.1038/ncomms1359 ↗
24. Stable direct-methane solid oxide fuel cells with calcium-oxide-modified nickel-based anodes operating at reduced temperatures10.1016/j.apenergy.2015.12.014 ↗
25. Direct octane fuel cells: a promising power for transportation10.1016/j.nanoen.2012.02.006 ↗
26. Sulfur tolerance improvement of Ni-YSZ anode by alkaline earth metal oxide BaO for solid oxide fuel cells10.1016/j.elecom.2012.03.027 ↗
27. First principles methods using CASTEP10.1524/zkri.220.5.567.65075 ↗
28. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
29. Atoms, molecules, solids, and surfaces: applications of the generalized gradient approximation for exchange and correlation10.1103/PhysRevB.46.6671 ↗
30. Norm-conserving pseudopotentials10.1103/PhysRevLett.43.1494 ↗
31. The synchronous-transit method for determining reaction pathways and locating molecular transition states10.1016/0009-2614(77)80574-5 ↗
32. A generalized synchronous transit method for transition state location10.1016/S0927-0256(03)00111-3 ↗
33. Constructing high-performance radiation-resistant ternary YSZ-MgO-CNT nanocomposites via tailored nanostructures10.1016/j.jeurceramsoc.2021.04.029 ↗
34. Potentiometric determination of the gibbs energies of formation of SrZrO3 and BaZrO310.1007/BF02651723 ↗
35. Research on the electrochemistry of oxygen ion conductors in the former Soviet Union. I. ZrO2-based ceramic materials10.1007/s100080050131 ↗
36. Thermodynamic evaluation of the BaO-ZrO2-YO1.5 system10.1016/j.ceramint.2016.05.172 ↗
37. Critical evaluation and thermodynamic optimization of the CaO-ZrO2 and SiO2-ZrO2 systems10.1016/j.jeurceramsoc.2016.10.008 ↗
38. Thermochemistry of the ZrO2–SrO system: from enthalpies of formation and heat capacities of the compounds to the phase diagram10.1111/jace.16812 ↗
39. Barium-modified NiO–YSZ/NiO–GDC cermet as new anode material for solid oxide fuel cells (SOFC)10.1016/j.ssi.2014.04.014 ↗
40. In situ surface modification of Ni-YSZ with BaZrO3 for enhancing the sulfur tolerance of Ni-YSZ anode10.1149/2.0651609jes ↗
41. Study of structural, elastic, electronic and optical properties of seven SrZrO3 phases: first-principles calculations10.1016/j.jssc.2012.07.005 ↗
42. Nature of defects in blue light emitting CaZrO3: spectroscopic and theoretical study10.1039/C5RA09637E ↗
43. Fabrication of a regenerable Ni supported NiO-MgO catalyst for methane steam reforming by exsolution10.1016/j.jpowsour.2018.07.025 ↗
44. Electrocatalytic reforming of carbon dioxide by methane in SOFC system10.1016/j.cattod.2003.10.017 ↗
45. Constitution of the Sr–Ni–O system10.1016/j.jssc.2005.06.035 ↗
46. Synthesis and stability of SrxNiyOz chromium getter for solid oxide fuel cells10.1149/2.0811809jes ↗
47. H2O absorption assisted Sr-segregation in strontium nickel oxide based chromium getter and encapsulation with SrCO310.1149/2.0351902jes ↗
48. Diverse functions of oxygen vacancies for oxygen ion conduction10.1021/acsaem.2c01718 ↗
49. Functional materials for the IT-SOFC10.1016/j.jpowsour.2007.05.085 ↗
50. NdBa1−xCo2O5+δ as cathode materials for IT-SOFC10.1016/j.ssi.2015.12.023 ↗
51. Synthesis and electrical properties of Co-doped Y0.08Sr0.92TiO3−δ as a potential SOFC anode10.1016/j.ssi.2007.12.097 ↗
52. Enhancing oxygen iron conductivity of 8YSZ electrolytes in SOFC by doping with Fe2O310.1016/j.commatsci.2018.01.057 ↗
53. Computer simulation of defects and oxygen transport in yttria-stabilized zirconia10.1016/j.ssi.2006.06.030 ↗
54. Structural parameters and oxygen ion conductivity of Y2O3–ZrO2 and MgO–ZrO2 at high temperature10.1016/j.ceramint.2013.05.032 ↗
55. Ionic conductivity in the ternary system (ZrO2)1−0.08x−0.12y–(Y2O3)0.08x–(CaO)0.12y10.1023/A:1004857312129 ↗
56. A study of electrically insulated oxide substrates for flat-tube segmented-in-series solid oxide fuel cells10.1016/j.jpowsour.2011.11.056 ↗
57. Temperature-programmed reduction study of NiO–MgO interactions in magnesia-supported Ni catalysts and NiO–MgO physical mixture10.1039/FT9908602663 ↗
58. Achieving robust redox stability of SOFC through Ni-YSZ anode layer thinning and inert support mechanical compensation10.1021/acsaem.2c00182 ↗
59. YSZ–MgO composite electrolyte with adjusted thermal expansion coefficient to other SOFC components10.1016/j.ssi.2003.08.019 ↗
60. Band gap bowing in NixMg1−xO10.1038/srep31230 ↗
61. Synthesis, structural characterization, electrical properties and chemical stability of a (ZrO2)0.97(Y2O3)0.03−x(MgO)2x solid solution10.1039/C6RA12295G ↗
62. Characterization of impregnated GDC nano structures and their functionality in LSM based cathodes10.1016/j.ssi.2012.07.011 ↗
63. Effect of Sr-doped LaCoO3 and LaZrO3 infiltration on the performance of SDC-LSCF cathode10.1149/1.3581026 ↗