journal article·2023-12

Designing FeCr0.7NiCu0.5Ti0.5 high-entropy alloy doped with rare earth yttrium: Effects on microstructure and passive film

Long Meng, Chun Lin, Sheng Fang, Lingsheng Ke, Mingtian Tan, Tao Qi

Publisher page

Abstract

After constant potential passivation (CPP), the effect of rare earth yttrium (Y) on the corrosion resistance of the passive film on the surface of FeCr 0.7NiCu 0.5Ti 0.5 alloy in H 2SO 4 was investigated. The results manifested that when Y content exceeded 0.04, the microstructure of Ni 3Ti transformed into Cu 5 Y phase, and gradually expanded with the addition of Y. XPS etching analysis of passive film composition with changing etching depth and cyclic polarization analysis of passive film pitting corrosion sensitivity are two methods used to assess the corrosion resistance of alloy. Compared with FeCr 0.7NiCu 0.5Ti 0.5 alloy and FeCr 0.7NiCu 0.5Ti 0.5Y 0.06 alloy, the passivation current density after CPP reduced from 5.682 × 10 −3 to 4.630 × 10 −4 A/cm 2 . With the addition of Y, the protection and density of the passive film was enhanced, resulting in an improvement in the corrosion resistance of the alloy. The pitting corrosion behavior was related to the changes in inclusion content and morphology caused by Y, and rare earth was advantageous to boost the passivation capability of FeCr 0.7NiCu 0.5Ti 0.5 series alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. The cost of corrosion in China10.1038/s41529-017-0005-2 ↗
2. Corrosion resistance of weight reduced AlxCrFeMoV high entropy alloys10.1016/j.apsusc.2019.03.173 ↗
3. Science and technology in high-entropy alloys10.1007/s40843-017-9195-8 ↗
4. A lightweight single-phase AlTiVCr compositionally complex alloy10.1016/j.actamat.2016.10.037 ↗
5. Predicting the formation and stability of single phase high-entropy alloys10.1016/j.actamat.2015.11.040 ↗
6. Novel alloy design concepts enabling enhanced mechanical properties of high entropy alloys10.3389/fmats.2022.868721 ↗
7. Corrosion behavior and mechanism of dual phase Fe1.125Ni1.06CrAl high entropy alloy10.1016/j.corsci.2022.110276 ↗
8. Novel Co-free CrFeNiNb0.1Ti high-entropy alloys with ultra-high hardness and strength10.1016/j.msea.2019.138212 ↗
9. Oxidation behavior of AlCoCrFeNiSi high-entropy alloys at 1100 ℃10.1016/j.corsci.2021.109633 ↗
10. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
11. Mo effect on natural passivation and corrosion behavior of duplex stainless steels in alkaline media10.1149/1945-7111/abd36f ↗
12. Cooperative effect of Cr and Al elements on passivation enhancement of eutectic high-entropy alloy AlCoCrFeNi2.1 with precipitates10.1016/j.jmst.2022.07.023 ↗
13. Effects of Mn on the electrochemical corrosion and passivation behavior of CoFeNiMnCr high-entropy alloy system in H2SO4 solution10.1016/j.jallcom.2019.152943 ↗
14. Effects of the element La on the corrosion properties of CrMnFeNi high entropy alloys10.1016/j.jallcom.2020.155825 ↗
15. Effect of Ce on the localized corrosion behavior of non-equiatomic high-entropy alloy Fe40Mn20Cr20Ni20 in 0.5 M H2SO4 solution10.1016/j.corsci.2022.110489 ↗
16. Microstructures and properties of Crx-FeNiCu0.5Ti0.5 high-entropy alloys for corrosion resistance10.1016/j.intermet.2022.107781 ↗
17. Electrochemical behaviour of passive films on molybdenum-containing austenitic stainless steels in aqueous solutions10.1016/j.electacta.2004.07.011 ↗
18. Factors affecting the electrochemical behavior and stress corrosion cracking of Alloy 690 in chloride environments10.1016/j.matchemphys.2005.07.053 ↗
19. Cyclic-anodic-polarization studies of a Zr41.2Ti13.8Ni10Cu12.5Be22.5 bulk metallic glass10.1016/j.intermet.2004.04.005 ↗
20. Dissolution rates of iron and chromium and Fe-Cr-alloys in the passive state10.1016/0010-938X(90)90158-2 ↗
21. Effects of rare earth metals on steel microstructures10.3390/ma9060417 ↗
22. The influence of phosphate on repassivation of 304 stainless steel in neutral chloride solution10.1016/S0013-4686(97)00224-7 ↗
23. Comparison of the corrosion and passivity behavior between CrMnFeCoNi and CrFeCoNi coatings prepared by argon arc cladding10.1016/j.jmrt.2020.05.093 ↗
24. Diffusion impedance of electroactive materials, electrolytic solutions and porous electrodes: Warburg impedance and beyond10.1016/j.electacta.2018.05.136 ↗
25. Evaluation of corrosion behaviour of Pb-Co3O4 electrodeposited coating using EIS method10.1016/j.corsci.2019.06.023 ↗
26. Effects of the oxidants H2O and CrF3 on the corrosion of pure metals in molten (Li,Na,K)F10.1016/j.corsci.2015.11.032 ↗
27. In-situ electrochemical-AFM study of localized corrosion of AlxCoCrFeNi high-entropy alloys in chloride solution10.1016/j.apsusc.2018.01.047 ↗
28. The effect of molybdenum on the corrosion behaviour of the high-entropy alloys Co1.5CrFeNi1.5Ti0.5Mox in aqueous environments10.1016/j.corsci.2010.04.004 ↗
29. A critical appraisal of some popular laboratory electrochemical tests for predicting the localized corrosion resistance of stainless alloys in sea water10.5006/0010-9312-28.8.283 ↗