journal article·2023-12

Effect of pre-sintering particle size on the microstructure and magnetic properties of two-step hot-press prepared BaFe12O19 thick films

Anjiang Dong, Ranyang Liu, Zeqiang Tian, Feng Peng, Run Zhao, Xiaodong Su, Rujun Tang

Publisher page

Abstract

Both particle size and processing conditions can affect the magnetic properties of ferrite materials. In this work, the two-step hot-press procedures (hot-press magnetic orientation followed by hot-press sintering) is designed for fabrication of high quality BaFe 12O 19 thick films. The effects of pre-sintering particle size (G pre ) on the microstructure and magnetic properties of the thick films are investigated. Results show that reducing G pre increase c -axis orientation and remanence ratio (RR) of sintered thick film greatly. This should be due to the reduced energy barriers for grain orientation during the hot-press magnetic orientation process. Decreasing G pre from 920 nm to 170 nm leads to larger coercivity (H c), while the saturation magnetization does not change notably above G pre = 170 nm. The H c mechanism is further analyzed by the G pre dependent anisotropy field H k and the first-order-reversal curves of the thick film. Results show that H k increases with reducing G pre, while the inter-grain interactions are not notably affected by G pre. Therefore, the increase of H c should be contributed by both the decrease of sintered particle size and the improved RR of the film after hot-press magnetic field orientation. The above results show that the two-step hot-press sintering prepared hexaferrite thick films with optimized G pre is a good candidate for the realization of self-biased high frequency devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Magnetic Properties and Applications · Magneto-Optical Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Crystallographically textured and magnetic lacu-substituted ba-hexaferrite with excellent gyromagnetic properties10.3390/ma15248792 ↗
2. Submicron pre-sintering particle size effects on the microstructure and magnetic properties of hot-press sintered barium hexaferrite thick films10.1016/j.ceramint.2022.04.267 ↗
3. Improved coercivity of W- and M-type composite hexaferrites using two different synthesis routes10.1016/j.jeurceramsoc.2022.03.022 ↗
4. Integrated self-biased hexaferrite microstrip circulators for millimeter-wavelength applications10.1109/22.903102 ↗
5. Self-biasing circulators operating at K/sub a/-band utilizing M-type hexagonal ferrites10.1109/20.179764 ↗
6. Screen printed thick self-biased, low-loss, barium hexaferrite films by hot-press sintering10.1063/1.2221527 ↗
7. Crystallographically textured Ba0.8La0.2Fe11.8Cu0.2O19-δ hexaferrites with narrow FMR linewidth10.1016/j.ceramint.2019.12.110 ↗
8. The law of approach to saturation in ferromagnets originating from the magnetocrystalline anisotropy10.1016/j.jmmm.2010.02.040 ↗
9. Textured M-type barium hexaferrite Ba(ZnSn)xFe12−2xO19 with c-axis anisotropy and high squareness ratio10.1016/j.ceramint.2018.11.138 ↗
10. Effects of La substitution on micromorphology, static magnetic properties and low ferromagnetic resonance linewidth of self-biased M-type Sr hexaferrites for high frequency application10.1016/j.ceramint.2020.12.020 ↗
11. Tailoring magnetic properties of Al-substituted M-type strontium hexaferrites10.1007/s00339-018-2224-y ↗
12. Perpendicularly oriented polycrystalline BaFe11.1Sc0.9O19 hexaferrite with narrow FMR linewidths10.1111/j.1551-2916.2008.02578.x ↗
13. Barium hexaferrite thick films by hot press sintering10.1142/S0217984910022664 ↗
14. Screen-printable, self-biased SrM/PDMS composites for integrated magnetic microwave devices10.1109/TMAG.2021.3104468 ↗
15. On the potential of hard ferrite ceramics for permanent magnet technology—a review on sintering strategies10.1088/1361-6463/abfad4 ↗
16. Preparation and anisotropic properties of textured structural ceramics: a review10.1007/s40145-019-0325-5 ↗
17. Barium hexaferrites with narrow ferrimagnetic resonance linewidth tailored by site‐controlled Cu doping10.1111/jace.18702 ↗
18. Preparation of scandium-doped, textured, M-type barium ferrite via a wet magnetizing orientation process10.1007/s11664-017-5949-z ↗
19. Crystallographically textured Zn2W-type barium hexaferrite for microwave and millimeter wave applications10.1016/j.jallcom.2018.09.087 ↗
20. Enhanced efficiency C-axis textured M-type barium ferrite for realization of self-biased circulators10.1007/s10854-018-9086-0 ↗
21. Highly c-axis oriented, self-biased and low loss barium ferrite thin films by sol-gel method10.1016/j.matlet.2016.12.026 ↗
22. Effect of sintering temperature on microstructure and magnetic and dielectric properties of M-type barium ferrites10.1016/j.ceramint.2022.06.071 ↗
23. Enhanced microstructure homogeneity, density and magnetic performances of the BaM hexaferrite/PDMS composite films through solvent-assisted synthesis10.1016/j.ceramint.2022.04.214 ↗
24. Lattice defects related magnetic and magnetocapacitance properties of multiferroic BaFe10.2Sc1.8O19 epitaxial thin films10.1016/j.scriptamat.2021.114466 ↗
25. Structural and magnetic properties of Co Ti substituted barium hexaferrite thick films10.1016/j.jallcom.2016.03.283 ↗
26. Magnetic properties and law of approach to saturation in Mn-Ni mixed nanoferrites10.1016/j.jallcom.2018.09.160 ↗
27. First-order reversal curve diagrams: a new tool for characterizing the magnetic properties of natural samples10.1029/2000JB900326 ↗
28. Grain-size dependent demagnetizing factors in permanent magnets10.1063/1.4904854 ↗
29. Topical review: progress and prospects of hard hexaferrites for permanent magnet applications
30. Complex correlations between microstructure and magnetic behavior in SrFe12O19 hexaferrite nanoparticles10.1038/s41598-021-02782-2 ↗
31. Characterization of hematite (α-Fe2O3), goethite (α-FeOOH), greigite (Fe3S4), and pyrrhotite (Fe7S8) using first-order reversal curve diagrams10.1029/2006JB004715 ↗
32. 3D interacting magnetic multilayered nanowire arrays: the emergence and evolution of new first-order reversal curve features10.1088/1361-648X/ab62ba ↗
33. Application of FORC distributions to the study of magnetic interactions in ferrites of composition10.1016/j.jmmm.2008.02.034 ↗
34. Mechanism of the enhanced coercivity for the dual-main-phase Ce-Fe-B magnet10.1038/s41598-020-75082-w ↗
35. First-order reversal curve analysis of a Nd-Fe-B sintered magnet with soft X-ray magnetic circular dichroism microscopy10.1016/j.actamat.2018.09.053 ↗
36. Temperature dependent magnetization reversal process of a Ga-doped Nd-Fe-B sintered magnet based on first-order reversal curve analysis10.1016/j.actamat.2019.08.004 ↗