journal article·2023-12

Cr2S3 nanosheet grafted with porous N-doped carbon architecture as an anode with enhanced Li-storage property

Xia Zeng, Jing Chen, Lin Ma, Chen Chen, Yuan Yuan, Lusheng Liao, Ziyun Peng, Liyi Zheng, Yilin Huang, Jie Peng, Guixun Yang, Yanjie Xi

Publisher page

Abstract

Chromium-based transition metal sulfide such as chromium hemi trisulfide (Cr 2S 3) gradually emerges as a potential lithium-ion host material considering its relatively large specific capacity along with low cost advantage. However, some excruciating issues such as serious particle aggregation, large volume expansion and insufficient inherent conductivity always result in an inferior Li-storage behavior such as low reversible capacity, limited cycling life and poor high-rate performance. Rational structure design and effective combination with suitable component are crucial to achieve superior Li-storage performance. Herein, a heterostructured composite with small Cr 2S 3 nanosheets embedded into phenanthroline-derived N-doped porous carbon skeleton (Cr 2S 3 /NC) has been synthesized through a calcination and sulfuration route. In as-prepared Cr 2S 3/NC composite, Cr 2S 3 nanosheets are well confined by carbon matrix, which is conductive to an effective suppression on aggregation and volume change. Meanwhile, porous conductive carbon framework supplies desirable expressway for fast electron delivery and reduces the distance for lithium ions diffusion. Consequently, the Cr 2S 3/NC anode delivers a remarkably elevated Li-storage performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Review of electric vehicle energy storage and management system: standards, issues, and challenges10.1016/j.est.2021.102940 ↗
2. Review of fast charging strategies for lithium-ion battery systems and their applicability for battery electric vehicles10.1016/j.est.2021.103306 ↗
3. Recent progress on lithium-ion batteries with high electrochemical performance10.1007/s11426-018-9410-0 ↗
4. Graphite as anode materials: fundamental mechanism, recent progress and advances10.1016/j.ensm.2020.12.027 ↗
5. Transition metal oxide anodes for electrochemical energy storage in lithium- and sodium-ion batteries10.1002/aenm.201902485 ↗
6. Facile route for synthesis of mesoporous Cr2O3 sheet as anode materials for Li-ion batteries10.1016/j.electacta.2014.06.160 ↗
7. High rate capability and long cycle stability of Cr2O3 anode with CNTs for lithium ion batteries10.1016/j.electacta.2016.06.156 ↗
8. Sandwich-like Cr2O3-graphite intercalation composites as high-stability anode materials for lithium-ion batteries10.1039/C4TA05072J ↗
9. Two-dimensional Cr2O3 and interconnected graphene-Cr2O3 nanosheets: synthesis and their application in lithium storage10.1039/C3TA13535G ↗
10. Nanostructured transition metal sulfides for lithium ion batteries: Progress and challenges10.1016/j.nantod.2014.09.005 ↗
11. The application of nanostructured transition metal sulfides as anodes for lithium ion batteries10.1016/j.jechem.2018.01.009 ↗
12. Hierarchical micro-architectures of electrodes for energy storage10.1016/j.jpowsour.2015.03.069 ↗
13. Recent developments on and prospects for electrode materials with hierarchical structures for lithium-ion batteries10.1002/aenm.201701415 ↗
14. Nanostructured carbon-metal oxide composite electrodes for supercapacitors: a review10.1039/C2NR32040A ↗
15. Strongly coupled carbon nanofiber-metal oxide coaxial nanocables with enhanced lithium storage properties10.1039/C3EE43123A ↗
16. Recent trends in template assisted 3D porous materials for electrochemical supercapacitors10.1039/D1TA06122D ↗
17. A comprehensive review of template-assisted porous carbons: modern preparation methods and advanced applications10.1016/j.mser.2022.100682 ↗
18. Salt template tuning morphology and porosity of biomass-derived N-doped porous carbon with high redox-activation for efficient energy storage10.1016/j.colsurfa.2022.129552 ↗
19. Transport, thermoelectric, and magnetic properties of a dense Cr2S3 ceramic10.1063/1.4736417 ↗
20. Chromia- and chromium sulfide-pillared clays: Preparation, characterization, and catalytic activity for thiophene hydrodesulfurization10.1006/jcat.1997.1618 ↗
21. Synthesis and characterization of Cr2S3-Bi2O3 nanocomposites: photocatalytic, quenching, repeatability, and antibacterial performances10.1007/s10854-019-01668-4 ↗
22. Preparation, and structural of new NiS-SiO2 and Cr2S3-TiO2 nano-catalyst: photocatalytic and antimicrobial studies10.1016/j.jphotobiol.2019.03.016 ↗
23. Elimination of interlayer potential barriers of chromium sulfide by self-intercalation for enhanced hydrogen evolution reaction10.1021/acsami.0c20577 ↗
24. Infrequent cubane-like chromium sulfide cluster with σ-donor ligands with efficient electrocatalytic property toward hydrogen evolution reaction10.1021/acs.inorgchem.2c04464 ↗
25. Outstanding electrochemical behavior of reduced graphene oxide wrapped chromium sulfide nanoplates directly grown on nickel foam for supercapacitor applications10.1007/s10971-022-05888-9 ↗
26. Fabrication of chromium sulfide nanoparticles and reduced graphene oxide based high power asymmetric supercapacitor10.1007/s10854-022-09195-5 ↗
27. Promoting the optoelectronic and ferromagnetic properties of Cr2S3 nanosheets via Se doping10.1007/s11433-022-1914-2 ↗
28. Ag0 decorated Cr2S3 NPs embedded on PVP matrix: a colorimetric probe for selective and rapid detection of sulphide ions from environmental samples10.1016/j.saa.2021.120253 ↗
29. Toward the development of a high-voltage Mg cathode using a chromium sulfide host10.1021/acsmaterialslett.1c00308 ↗
30. Antisite occupation induced single anionic redox chemistry and structural stabilization of layered sodium chromium sulfide10.1038/s41467-017-00677-3 ↗
31. Is there a common reaction pathway for chromium sulfides as anodes in sodium-ion batteries? A case study about sodium storage properties of MCr2S4 (M = Cr, Ti, Fe)10.1007/s10008-022-05246-3 ↗
32. 1,10-Phenanthroline: a versatile building block for the construction of ligands for various purposes10.1016/j.ccr.2010.04.008 ↗
33. Main group metal chalcogenidometalates with transition metal complexes of 1,10-phenanthroline and 2,2 '-bipyridine10.1016/j.ccr.2016.08.009 ↗
34. Covalent phenanthroline framework derived FeS@Fe3C composite nanoparticles embedding in N-S-codoped carbons as highly efficient trifunctional electrocatalysts10.1002/adfm.201803973 ↗
35. Surface doping vs. bulk doping of cathode materials for lithium-ion batteries: a review10.1007/s41918-022-00155-5 ↗
36. Amorphous carbon coated multiwalled carbon nanotubes@transition metal sulfides composites as high performance anode materials for lithium ion batteries10.1016/j.electacta.2017.10.078 ↗
37. Conformal carbon coating on WS2 nanotubes for excellent electrochemical performance of lithium-ion batteries
38. Electronic properties of polymorphic two-dimensional layered chromium disulphide10.1039/C9NR04449C ↗
39. An atomically thin air-stable narrow-gap semiconductor Cr2S3 for broadband photodetection with high responsivity10.1002/aelm.202000962 ↗
40. Controlled growth and thickness-dependent conduction-type transition of 2D ferrimagnetic Cr2S3 semiconductors10.1002/adma.201905896 ↗
41. Ultrathin non-van der waals magnetic rhombohedral Cr2S3: space-confined chemical vapor deposition synthesis and raman scattering investigation10.1002/adfm.201805880 ↗
42. Raman spectroscopy of graphene and carbon nanotubes10.1080/00018732.2011.582251 ↗
43. Carbonisation of biomass-derived chars and the thermal reduction of a graphene oxide sample studied using Raman spectroscopy10.1016/j.carbon.2013.03.033 ↗
44. An environment-friendly preparation of reduced graphene oxide nanosheets via amino acid10.1088/0957-4484/22/32/325601 ↗
45. Sub-millimeter-scale growth of one-unit-cell-thick ferrimagnetic Cr2S3 nanosheets10.1021/acs.nanolett.9b00386 ↗
46. Highly efficient electrochemical synthesis of hydrogen peroxide (H2O2) enabled by amino acid glycine-derived metal-free nitrogen-doped ordered mesoporous carbon10.1021/acssuschemeng.1c08285 ↗
47. Heteroatom-doped carbon materials: Synthesis, mechanism, and application for sodium-ion batteries10.1002/smtd.201800323 ↗
48. Ordered mesoporous metal oxides: Synthesis and applications10.1039/c2cs35086f ↗
49. Chromium Chevrel phase sulfide (CrxMo6S8−y) as the cathode with long cycle life in lithium rechargeable batteries10.1016/S0167-2738(98)00074-5 ↗
50. Unlocking high capacity and fast Na+ diffusion of HxCrS2 by proton-exchange pretreatment10.1002/adma.202209811 ↗
51. Superior lithium storage capacity of α-MnS nanoparticles embedded in S-doped carbonaceous mesoporous frameworks10.1002/aenm.201902077 ↗
52. Tracking pseudocapacitive contribution to superior energy storage of MnS nanoparticles grown on carbon textile10.1021/acsami.6b07924 ↗
53. MoS2 nanosheets with conformal carbon coating as stable anode materials for sodium-ion batteries10.1016/j.electacta.2017.09.128 ↗
54. Sodium modified molybdenum sulfide via molten salt electrolysis as an anode material for high performance sodium-ion batteries10.1039/C5CP07007D ↗
55. Biomimetic Sn4P3 anchored on carbon nanotubes as an anode for high-performancesodium-ion batteries10.1021/acsnano.0c03432 ↗