Microstructure and mechanical property correlation in Silicon-doped equiatomic FeMnNi MEA: Experiments and simulation
Source abstract
Abstract
The effect of minor addition of Si to the FCC equiatomic FeMnNi medium entropy alloy (MEA) has been systematically investigated using experiments and DFT calculations. We report here a detailed investigation on 0.5 – 2 at% Si addition in FeMnNi MEA by using SEM, EBSD and TEM with uniaxial tensile tests and strain rate jump tests, to establish structural-property correlation. The experimental investigation reveals that the MEA with 2 at% Si exhibits remarkably improved combination of strength (YS = 249 MPa, UTS = 528 MPa) and ductility (70%), with (111) dislocation glide being the predominant mode of plastic deformation. A correlation with regard to lattice distortion and microstrain, in the context of dislocation plasticity and microband formation is made with DFT modelling. The SFE is found to increase due to Si addition and local lattice distortion, therefore contributing significantly to the solid solution hardening.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Biswas · 2022
4. Novel alloy design concepts enabling enhanced mechanical properties of high entropy alloys10.3389/fmats.2022.868721 ↗
5. Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy10.1016/j.msea.2020.139242 ↗
6. Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off10.1016/j.matdes.2020.109202 ↗
7. Enhanced strength and ductility of a tungsten-doped CoCrNi medium-entropy alloy10.1557/jmr.2018.247 ↗
8. Synergetic effect of Si addition on mechanical properties in face-centered-cubic high entropy alloys: a first-principles study10.1088/1361-651X/ac455a ↗
9. The effect of Al addition on solid solution strengthening in CoCrFeMnNi: experiment and modelling10.1016/j.actamat.2022.118208 ↗
10. In the quest of single phase multi-component multiprincipal high entropy alloys10.1016/j.jallcom.2016.11.383 ↗
11. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
12. High-entropy materials: critical review and way forward10.18520/cs/v118/i10/1520-1539 ↗
13. Deciphering micro-mechanisms of plastic deformation in a novel single phase fcc-based MnFeCoNiCu high entropy alloy using crystallographic texture10.1016/j.msea.2016.01.065 ↗
14. Micro-mechanisms of microstructural damage due to low cycle fatigue in CoCuFeMnNi high entropy alloy10.1016/j.ijfatigue.2019.105258 ↗
15. ICME approach to explore equiatomic and non-equiatomic single phase BCC refractory high entropy alloys10.1016/j.jallcom.2019.06.387 ↗
16. An Odyssey from High Entropy Alloys to Complex Concentrated Alloys
17. Understanding the deformation behavior of CoCuFeMnNi high entropy alloy by investigating mechanical properties of binary, ternary and quaternary alloy subsets10.1016/j.matdes.2018.07.046 ↗
18. Achieving high strength and ductility in equimolar FeMnNi medium entropy alloy by microstructural entropy10.1016/j.msea.2021.141965 ↗
19. Solving the strength-ductility tradeoff in the medium-entropy NiCoCr alloy via interstitial strengthening of carbon10.1016/j.intermet.2018.12.009 ↗
20. Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy
21. Mechanical behavior in boron-microalloyed CoCrNi medium-entropy alloy studied by in situ high-energy X-ray diffraction10.1016/j.msea.2020.139600 ↗
22. A novel medium entropy alloy based on iron-manganese-aluminum-nickel: influence of boron addition on phase formation microstructure and mechanical properties10.1088/2053-1591/ab600f ↗
23. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
24. Heterogeneous banded precipitation of (CoCrNi)93Mo7 medium entropy alloys towards strength–ductility synergy utilizing compositional inhomogeneity10.1016/j.scriptamat.2019.07.026 ↗
25. Synergistic effect by Al addition in improving mechanical performance of CoCrNi medium-entropy alloy10.1016/j.jallcom.2019.06.005 ↗
26. Effect of silicon addition on the microstructures, mechanical properties and helium irradiation resistance of NiCoCr-based medium-entropy alloys10.1016/j.jallcom.2020.156162 ↗
27. The effect of Si addition on the heterogeneous grain structure and mechanical properties of CrCoNi medium entropy alloy10.1016/j.msea.2022.143655 ↗
28. The effect of Si addition on the structure and mechanical properties of equiatomic CoCrFeMnNi high entropy alloy by experiment and simulation10.1016/j.mtla.2023.101707 ↗
29. Metastability driven hierarchical microstructural engineering: Overview of mechanical properties of metastable complex concentrated alloys10.1016/j.jallcom.2020.155625 ↗
30. Efficient stochastic generation of special quasirandom structures10.1016/j.calphad.2013.06.006 ↗
31. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
32. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
33. High-precision sampling for Brillouin-zone integration in metals10.1103/PhysRevB.40.3616 ↗
34. Theoretical investigation of the structural, electronic, and thermodynamic properties of CdS1-x Sex alloys10.1063/1.5018381 ↗
35. Structural and electrical properties of β-FeSi2 bulk materials for thermoelectric applications10.1016/j.phpro.2012.01.004 ↗
36. Separation of particle size and lattice strain in integral breadth measurements10.1107/S0365110X66000628 ↗
37. Analysis of the broadening of powder pattern peaks using variance, integral breadth, and fourier coefficients of the line profile
38. Phase composition and solid solution strengthening effect in TiZrNbMoV high-entropy alloys10.1016/j.matdes.2015.06.072 ↗
39. Solute strengthening in random alloys10.1016/j.actamat.2016.09.046 ↗
40. Predicting yield strengths of noble metal high entropy alloys10.1016/j.scriptamat.2017.08.030 ↗
41. Theory of strengthening in fcc high entropy alloys10.1016/j.actamat.2016.07.040 ↗
42. Effect of aluminum addition on solid solution strengthening in CoCrNi medium-entropy alloy10.1016/j.jallcom.2018.12.065 ↗
43. Mechanisms of slip mode modification in F.C.C. solid solutions10.1016/0956-7151(90)90126-2 ↗
44. Microband-induced plasticity in a high Mn-Al-C light steel10.1016/j.msea.2008.05.042 ↗
45. Microband formation in shock-loaded and quasi-statically deformed metals10.1016/0001-6160(89)90206-X ↗
46. The deformation of plastically non-homogeneous materials10.1080/14786437008238426 ↗
47. Geometrically necessary dislocations distribution in face-centred cubic alloy with varied grain size10.1016/j.matchar.2020.110205 ↗
48. Relationship between stacking-fault energy and x-ray measurements of stacking-fault probability and microstrain10.1063/1.1663122 ↗
49. Compositional complexity dependence of dislocation density and mechanical properties in high entropy alloy systems10.1016/j.pnsc.2020.07.002 ↗
50. Stacking fault energy prediction for austenitic steels: thermodynamic modeling vs. machine learning10.1080/14686996.2020.1808433 ↗
51. Stacking fault energy of face-centered-cubic high entropy alloys10.1016/j.intermet.2017.10.004 ↗
52. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
53. Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys10.1016/j.actamat.2022.117693 ↗
54. Twinnability predication for fcc metals10.1016/S1005-0302(11)60032-7 ↗
55. Theory for plasticity of face-centered cubic metals10.1073/pnas.1400786111 ↗
56. Effect of strain on generalized stacking fault energies and plastic deformation modes in fcc-hcp polymorphic high-entropy alloys: a first-principles investigation