Novel Li/LixSny thin film designed as an anode for lithium-ion microbatteries
Source abstract
Abstract
Miniaturization of lithium-ion batteries has become an extremely hot topic with the rapid development of microelectronic devices. Li metal being the most desirable anode has disadvantages in terms of dendrite formation, huge volumetric change of Li and its stripping and loss during cycling, etc., which restricts its application. The formation of well-matching interfaces is a key requirement to construct safe all-solid-state microbatteries. Herein, we show that a small addition of Sn to Li film anode is a promising solution, because this lithium-tin (LixSny) alloy can overcome some critical obstacles of lithium anode. The Li/LixSny thin film anode was deposited by a combination of magnetron sputtering and thermal evaporation on a copper foil substrate, electrochemically tested in comparison with pure Sn and Li anodes. These studies revealed that this anode with the preformed Li2Sn5 alloy demonstrated remarkably improved characteristics its counterparts. The Li/LixSny electrode showed a higher initial capacity and better cyclability during 100 charge-discharge cycles than monolithic Sn, and a lower overpotential, than monolithic Li. Among two Li/LixSny thin film electrodes with the thicknesses of 500 nm and 1000 nm of deposited Sn and Li layers, the latter one demonstrates a better stability against degradation, providing sufficient reservoirs of Li ions (Li regions) and easy pathways for them via LixSny alloy.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A review on second-life of Li-ion batteries: prospects, challenges10.1016/j.energy.2021.122881 ↗
2. A review on the key issues of the lithium ion battery degradation among the whole life cycle10.1016/j.etran.2019.100005 ↗
3. All-solid-state thin film μ-batteries for microelectronics10.1002/advs.202100774 ↗
4. Ensemble design of electrode-electrolyte interfaces: toward high-performance thin-film all-solid-state li-metal batteries10.1021/acsnano.0c08691 ↗
5. Three-dimensional microbatteries beyond lithium ion10.1016/j.matt.2020.04.020 ↗
6. All-solid-state thin film lithium/lithium-ion microbatteries for powering the internet of things10.1002/adma.202200538 ↗
7. Towards Li-S microbatteries: A perspective review10.1016/j.jpowsour.2023.233158 ↗
8. Challenges in lithium metal anodes for solid-state batteries10.1021/acsenergylett.9b02668 ↗
9. "Performance of EMIMFSI ionic liquid based gel polymer electrolyte in rechargeable lithium metal batteries,"10.1016/j.jiec.2018.04.022 ↗
10. A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards10.1016/j.jechem.2020.10.017 ↗
11. Interfacial challenges towards stable Li metal anode10.1016/j.nanoen.2020.105507 ↗
12. Engineering of lithium-metal anodes towards a safe and stable battery10.1016/j.ensm.2018.02.014 ↗
13. Protected lithium‐metal anodes in batteries: from liquid to solid10.1002/adma.201701169 ↗
14. Lithium metal anodes: Present and future10.1016/j.jechem.2019.12.024 ↗
15. "Stabilization of Sn Anode through Structural Reconstruction of a Cu–Sn Intermetallic Coating Layer,"10.1002/adma.202003684 ↗
16. Stabilizing Sn anodes nanostructure: Structure optimization and interfacial engineering to boost lithium storage10.1016/j.electacta.2021.139789 ↗
17. A tin-plated copper substrate for efficient cycling of lithium metal in an anode-free rechargeable lithium battery10.1016/j.electacta.2017.11.175 ↗
18. Challenges and development of tin-based anode with high volumetric capacity for Li-ion batteries10.1007/s41918-020-00082-3 ↗
19. Electrochemical activation of oxygen atom of SnO2 to expedite efficient conversion reaction for alkaline-ion (Li+/Na+/K+) storages10.1007/s12274-022-5188-3 ↗
20. Tin and tin compound materials as anodes in lithium-ion and sodium-ion batteries: a review10.3389/fchem.2020.00141 ↗
21. Electrochemical lithiation of tin and tin-based intermetallics and composites10.1016/S0013-4686(99)00191-7 ↗
22. Improved Cycle Stability of LiSn Alloy Anode for Different Electrolyte Systems in Lithium Battery10.3390/nano11020300 ↗
23. Mechanical rolling formation of interpenetrated lithium metal/lithium tin alloy foil for ultrahigh-rate battery anode10.1038/s41467-020-14550-3 ↗
24. Lithium and stannum hybrid anodes for flexible wire‐type lithium–oxygen batteries10.1002/sstr.202000015 ↗
25. Roll-to-roll prelithiation of Sn foil anode suppresses gassing and enables stable full-cell cycling of lithium ion batteries10.1039/C9EE01404G ↗
26. A first principles study of the mechanical properties of Li–Sn alloys10.1039/C5RA04685H ↗
27. In Situ Formed Li–Ag Alloy Interface Enables Li10GeP2S12-Based All-Solid-State Lithium Batteries10.1021/acsami.1c16356 ↗
28. Electrochemical properties of Sn-decorated SnO nanobranches as an anode of Li-ion battery10.1186/s40580-016-0070-1 ↗
29. On the electrochemistry of tin oxide coated tin electrodes in lithium-ion batteries10.1016/j.electacta.2015.02.150 ↗
30. Understanding the effect of p-, n-type dopants and vinyl carbonate electrolyte additive on electrochemical performance of Si thin film anodes for lithium-ion battery10.1016/j.electacta.2019.135179 ↗
31. J.-M. Tarascon. High-rate capability pure Sn-based nano-architectured electrode assembly for rechargeable lithium batteries10.1016/j.jpowsour.2008.12.025 ↗
32. SnO2 Model Electrode Cycled in Li-Ion Battery Reveals the Formation of Li2SnO3 and Li8SnO6 Phases through Conversion Reactions10.1021/acsami.7b19481 ↗
33. Physicochemical concepts of the lithium metal anode in solid-state batteries10.1021/acs.chemrev.0c00431 ↗
34. Artificial solid-electrolyte interphase for lithium metal10.1002/batt.202000225 ↗
35. Fluorinated hybrid solid-electrolyte-interphase for dendrite-free lithium deposition10.1038/s41467-019-13774-2 ↗
36. Phase transformations and capacity fade mechanism in LixSn nanoparticle electrodes revealed by operando 7Li NMR10.1039/C9TA03345A ↗
37. Impact of Electrode Thickness and Temperature on the Rate Capability of Li 4 Ti 5 O 12 /LiMn 2 O 4 Cells10.1149/1945-7111/ac3781 ↗
38. Three-dimensional lithiophilic Li22Sn5 alloy skeleton for dendrite-free and ultrahigh-capacity Li metal anode10.1016/j.electacta.2021.139787 ↗
39. High-rate, long cycle-life Li-ion battery anodes enabled by ultrasmall tin-based nanoparticles encapsulation10.1016/j.ensm.2018.02.008 ↗