Rapid formation of a surface ceramic protective film on Ti-6Al-4V alloy following laser-assisted ultrasonic nanocrystal surface modification
Source abstract
Abstract
A surface ceramic protective film was prepared on Ti-6Al-4V alloy using laser-assisted ultrasonic nanocrystal surface modification technology (LA-UNSM). The uniform ceramic protective film, which was comprised of Al 2O 3 and small amounts of TiO 2 and TiN, showed very strong adhesion to the substrate. LA-UNSM treatment dramatically increased the dislocation density and atomic diffusion rate by introducing thermomechanical activation energy, which further greatly reduced the energetic barriers of the oxide to nitride nucleation and growth. Due to the formation of a ceramic protective film and a nanocrystalline gradient reinforcement layer on the sample surface, the surface hardness was dramatically enhanced after LA-UNSM treatment. The electrochemical corrosion behavior in simulated seawater and the fretting wear behavior of samples were also investigated. The results revealed the ceramic protective film and gradient nanocrystalline layer introduced by LA-UNSM could substantially reduce the corrosion current density by 83 % and the wear volume by 90 % as compared to control samples. These results show that LA-UNSM effectively promotes the corrosion and wear property of titanium alloy through forming a ceramic protective film.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High Entropy Alloys Studies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Effect of groove surface texture on the fretting wear of Ti-6Al-4V alloy
2. Electrochemical and tribocorrosion performances of CrMoSiCN coating on Ti-6Al-4V titanium alloy in artificial seawater10.1016/j.corsci.2019.108385 ↗
3. Improving the surface properties of additive-manufactured Inconel 625 by plasma nitriding
4. Higher nitriding efficiency in ultrafine-grained iron processed by ultrasonic nanocrystal surface modification10.1007/s11661-021-06426-y ↗
5. Effects of ultrasonic nanocrystal surface modification on the thermal oxidation behavior of Ti6Al4V10.1016/j.surfcoat.2017.04.051 ↗
6. The influence of thermal oxidation on the microstructure, fatigue properties, tribological and in vitro behaviour of laser powder bed fusion manufactured Ti-34Nb-13Ta-5Zr-0.2O alloy10.1016/j.jallcom.2022.167264 ↗
7. Influence of cooling kinetics on surface texture, hydrophilicity and scratch resistance of the oxide layers produced by thermal oxidation on Ti-6Al-4V10.1016/j.surfcoat.2022.128956 ↗
8. Microstructure evolution and vacuum tribological properties of surface nitriding layer on a TiZrAlV alloy fabricated by laser nitriding10.1016/j.jmrt.2023.03.034 ↗
9. Effect of temperature on thermal oxidation behavior of biomedical Ti-ZrMo alloys10.1016/j.jallcom.2022.164202 ↗
10. Duplex surface modification of pure Ti via thermal oxidation and gas nitriding: Preparation and electrochemical studies10.1016/j.ceramint.2022.08.016 ↗
11. Effect of surface nanostructuring on corrosion behavior of Ti-6Al-4V alloy10.1016/j.matchar.2016.09.031 ↗
12. Laser shock peening enables 3D gradient metal structures: a case study on manufacturing self-armored hydrophobic surfaces10.1016/j.ijmachtools.2023.103993 ↗
13. High-performance integrated additive manufacturing with laser shock peening-induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components10.1016/j.ijmachtools.2019.103475 ↗
14. A critical review of laser shock peening of aircraft engine components10.1002/adem.202201451 ↗
15. Ultrasonic nanocrystal surface modification for strength improvement and suppression of hydrogen permeation in multi-layered steel10.1016/j.jallcom.2021.160975 ↗
16. The formation of gradient nanostructured medium carbon steel via mild, moderate, and severe ultrasonic nanocrystal surface modification options: assessment on wear and friction performance10.1016/j.mseb.2022.115970 ↗
17. The effect of ultrasonic nanocrystal surface modification on low temperature nitriding of ultra-high strength steel10.1016/j.surfcoat.2019.07.006 ↗
18. Columnar and nanocrystalline combined microstructure of the nitrided layer by active screen plasma nitriding on surface-nanocrystalline titanium alloy10.1016/j.apsusc.2023.156614 ↗
19. Influence of gas pressure on the low-temperature plasma nitriding of surface-nanocrystallined TC4 titanium alloy10.1016/j.surfcoat.2022.128327 ↗
20. Effects of ultrasonic surface rolling processing and plasma nitriding on the fretting wear behavior of Inconel 690TT10.1016/j.surfcoat.2020.126312 ↗
21. Enhanced strength and sliding wear properties of gas nitrided Ti-6Al-4V alloy by ultrasonic shot peening pretreatment10.1016/j.surfcoat.2023.129325 ↗
22. Surface nanocrystallization by ultrasonic nano-crystal surface modification and its effect on gas nitriding of Ti6Al4V alloy10.1016/j.msea.2018.08.089 ↗
23. Influence of surface nanocrystallization pretreatment on high-temperature vacuum carburizing behavior10.1016/j.jmatprotec.2019.116519 ↗
24. Microstructure evolution in Ti64 subjected to laser-assisted ultrasonic nanocrystal surface modification10.1016/j.ijmachtools.2018.09.005 ↗
25. Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting10.1016/j.corsci.2018.09.010 ↗
26. Enhancing high-temperature oxidation resistance of Ti6Al4V alloy by simple surface aluminization10.1016/j.corsci.2021.109810 ↗
27. Effect of stress-relief annealing on anodic dissolution behaviour of additive manufactured Ti-6Al-4V via laser solid forming10.1016/j.corsci.2019.04.002 ↗
28. Corrosion resistance enhancement of Ni-P electroless coatings by incorporation of nano-SiO2 particles10.1016/j.matdes.2010.06.021 ↗
29. The effect of fluoride ions on the corrosion behavior of pure titanium in 0.05M sulfuric acid10.1016/j.electacta.2014.05.055 ↗
30. Corrosion behavior of dual-phase Ti-6Al-4V alloys: a discussion on the impact of Fe content10.1016/j.jallcom.2020.157708 ↗
31. Accelerated precipitation of the B2 particles and its effect on Al0.3CoCrFeNi high-entropy alloy by electric current assisted annealing10.1016/j.matchar.2021.111434 ↗
32. The effect of alpha-case formation on plastic deformation and fracture of near β titanium alloy10.1016/j.msea.2019.138495 ↗
33. Effect of α phase on evolution of oxygen-rich layer on titanium alloys10.1016/S1003-6326(19)64962-9 ↗