journal article·2023-10

Bulk MgB2 superconductor for levitation applications fabricated with boron processed by different routes

B. Savaskan, U.K. Ozturk, S.B. Guner, M. Abdioglu, M.V. Bahadır, S. Acar, M. Somer, A.M. Ionescu, C. Locovei, M. Enculescu, P. Badica

Publisher page

Abstract

Bulk MgB2 discs were prepared by an in situ route from mixtures of magnesium and boron powders. The boron powders were produced by two methods. The first one consisted of a self-propagating high tem-perature magnesiothermic synthesis (SHS) process followed by acid and fluorine cleaning and a heat treatment in inert atmosphere. This approach produced boron with purities between 86 % and 97 %, where the main impurity was Mg. Depending on the final heat treatment, these boron powders were amorphous or crystalline. In the second route, high purity nano powders (99 %) of boron were obtained by a diborane pyrolysis process. Bulks of MgB2 were characterized by structural, microstructural, and magnetic mea-surements. Critical current density, pinning force aspects and levitation force (including guiding force) details were assessed. Amorphous lower purity boron (86-97 %) obtained by the first processing route was found to promote the largest levitation forces of the MgB2 bulks and, among these samples, the best le-vitation results were recorded when using boron with a purity of 95-97 %. Use of a lower purity boron that decreases the cost of MgB2 promotes large scale production at industrial level of bulk MgB2 super-conducting magnets for levitation applications and enhances the applicability potential of MgB2 super-conductor. The relationship between levitation force and specific features of the samples such as pinning force details are discussed.& COPY; 2023 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Superconductivity in MgB2 and Alloys · Layered Double Hydroxides Synthesis and Applications · Physics of Superconductivity and Magnetism

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Superconductivity at 39 K in magnesium diboride10.1038/35065039 ↗
2. Size reduction of boron particles by high-power ultrasound for optimization of bulk MgB210.1088/1361-6668/abb63e ↗
3. Beyond superconductivity towards novel biomedical, energy, ecology, and heritage applications of MgB210.1080/17518253.2022.2124891 ↗
4. Compressive properties of pristine and SiC-Te-added MgB2 powders, green compacts and spark-plasma-sintered bulks10.1016/j.ceramint.2018.03.008 ↗
5. A novel sintering protocol to enhance the connectivity of ex situ MgB2 bulks in an open system by using Mg vapor10.1088/1361-6668/ab617a ↗
6. Permanent magnet with MgB2 bulk superconductor10.1063/1.4890724 ↗
7. Determination of magnetic levitation force properties of bulk MgB2 for different permanent magnetic guideways in different cooling heights10.1016/j.jallcom.2020.155167 ↗
8. Superconducting joints using multifilament MgB2 wires for MRI application10.1016/j.scriptamat.2021.114156 ↗
9. The reactive liquid Mg infiltration process to produce large superconducting bulk MgB2 manufacts10.1016/j.cryogenics.2005.11.011 ↗
10. Fast formation and superconductivity of MgB2 thick films grown on stainless steel substrate10.1016/S0921-4534(01)00886-3 ↗
11. Properties of superconducting MgB2 wires: in situ versus ex situ reaction technique10.1088/0953-2048/16/5/317 ↗
12. Enhancement of the critical current density and flux pinning of MgB2 superconductor by nanoparticle SiC doping10.1063/1.1517398 ↗
13. Effects of precursor powders and sintering processes on the superconducting properties of MgB210.1088/0953-2048/17/9/014 ↗
14. Effect of boron powder purity on superconducting properties of MgB210.1088/0953-2048/19/6/009 ↗
15. Effect of Boron powder purity on superconducting properties of bulk MgB210.1016/j.physc.2007.04.112 ↗
16. Fabrication of superconducting MgB2 from boron oxide (B2O3), and its microstructural and electrical characterization
17. Strong influence of boron precursor powder on the critical current density of MgB210.1088/0953-2048/18/11/011 ↗
18. High trapped fields in bulk MgB2 prepared by hot-pressing of ball-milled precursor powder10.1088/0953-2048/26/12/122002 ↗
19. Effects of stoichiometry, purity, etching and distilling on resistance of MgB2 pellets and wire segments10.1016/S0921-4534(02)01840-3 ↗
20. Improvement of critical current density of MgB2 bulk superconductor processed by spark plasma sintering10.1111/jace.17366 ↗
21. Microstructure and superconducting properties of nanocarbon-doped internal Mg diffusion-processed MgB2 wires fabricated using different boron powders
22. Strong influence of precursor powder on the critical current density of Fe-sheathed MgB2 tapes10.1088/0953-2048/20/6/015 ↗
23. Influence of crystalline boron powders on superconducting properties of C-doped internal Mg diffusion processed MgB2 wires10.1088/0953-2048/28/10/105013 ↗
24. Properties of MgB2 wires made by internal magnesium diffusion into different boron powders10.1088/0953-2048/28/9/095014 ↗
25. Enhanced critical current properties of in situ processed MgB2 wires using milled boron powder and low temperature solid-state reaction10.1016/j.jallcom.2009.11.134 ↗
26. Spark plasma sintering of bulk MgB2 and levitation force measurements10.1088/1361-6668/ab5f3e ↗
27. The investigation on the regional nanoparticle Ag doping into MgTi0.06B2 bulk for improvement the magnetic levitation force and the bulk critical current10.1016/j.jallcom.2017.07.065 ↗
28. IR laser line scanning treatments to improve levitation forces in MgTi0.06B2 bulk materials10.1016/j.jallcom.2019.151966 ↗
29. The levitation characteristics of MgB2 plates on tracks of permanent magnets10.1063/1.3422361 ↗
30. Investigation on superconducting and magnetic levitation force behaviour of excess Mg doped-bulk MgB2 superconductors10.1016/j.cryogenics.2019.05.002 ↗
31. Chapter 4A
32. Magnetization of hard superconductors10.1103/PhysRevLett.8.250 ↗
33. Improvement of the critical current density of spark plasma sintered MgB2 by C60 addition10.1088/0953-2048/23/9/095002 ↗
34. Flux pinning mechanisms in type II superconductors10.1080/14786439808206556 ↗
35. Design of magnetic levitation force measurement system at any low temperatures from 20K to room temperature10.1016/j.jallcom.2015.11.230 ↗
36. Critical current densities in Ag-added bulk MgB210.1016/j.physc.2015.02.042 ↗
37. The effects of excess Mg addition on the superconductivity of MgB210.1007/s10948-015-3120-8 ↗
38. Synthesis and stoichiometry of MgB210.1016/S0921-4534(02)01842-7 ↗
39. Synthesis and characterization of excess magnesium MgB2 superconductor under inert carbon environment10.1016/j.physc.2009.09.010 ↗
40. Role of MgO impurity on the superconducting properties of MgB210.1016/j.physc.2014.06.004 ↗
41. Effect of Cu addition in reduction of MgO content for the synthesis of MgB2 through sintering10.1016/j.jallcom.2008.03.098 ↗
42. Improving the connectivity of MgB2 bulk superconductors by a novel liquid phase sintering process10.1088/1361-6668/ac5164 ↗
43. Enhanced critical current density of ex situ MgB2 via control of Mg assisted sintering10.1007/s10854-022-08101-3 ↗
44. Significant improvement in the critical current density of in situ MgB2 by excess Mg addition10.1088/0953-2048/20/8/L01 ↗
45. Controlling flux pinning precipitates during MgB2 synthesis10.1063/1.1482794 ↗
46. Progress in critical current density (Jc) in sintered MgB2 bulks10.1007/s10948-018-4777-6 ↗
47. In situ X-ray synchrotron diffraction study of MgB2 synthesis from elemental powders10.1016/j.actamat.2007.12.014 ↗
48. Optimization of processing conditions towards high trapped fields in MgB2 bulks10.1016/j.jallcom.2014.04.017 ↗
49. Excess Mg addition MgB2 /Fe wires with enhanced critical current density10.1063/1.2909203 ↗
50. Pinning-force scaling and its limitation in intermediate and high temperature superconductors10.1142/S0217984912300074 ↗
51. Flux pinning force in bulk MgB2 with variable grain size10.1103/PhysRevB.75.134515 ↗
52. On the pinning force in high density MgB2 samples10.1038/s41598-021-85209-2 ↗
53. Melt processing of bulk high Tc superconductors and their application10.1109/20.133464 ↗
54. An analysis on the relation between the seed distance and vertical levitation force for the multi−seeded YBCO using the modified advanced frozen image (MAFI) and experimental methods10.1016/j.jallcom.2019.07.205 ↗
55. Investigation of the levitation force of field-cooled YBCO and MgB2 disks as functions of temperature10.1088/1361-6668/aa69ec ↗
56. Magnetic properties of finite superconducting cylinders. II. Nonuniform applied field and levitation force10.1103/PhysRevB.64.214507 ↗