journal article·2023-10

Precipitation behavior of γ′ precipitates in 21Cr-32Fe-41Ni heat-resistant alloy at different aging temperatures

Tianyu Li, Limin Wang

Publisher page

Abstract

The precipitation behavior of γ′ precipitates and mechanical properties of 21Cr-32Fe-41Ni alloy at different aging temperatures were investigated by scanning electron microscopy, transmission electron microscopy, chemical phase analysis, mechanical property tests. The results showed that the precipitates in 21Cr-32Fe-41Ni alloy included γ′ precipitates, MC phases, σ phases after aging heat treatment. There were two precipitation modes of γ′ precipitates: intragranular dispersed precipitation and grain boundary discontinuous precipitation. The number and size of intragranular γ′ precipitates increased with the increase in aging temperature. During the coarsening process, the γ′ precipitates were kept spherical. When the aging temperature was above 740 ℃, the discontinuous precipitation reaction occurred under the combined effect of grain boundary migration and solute diffusion-controlled equilibrium phase growth. According to SEM images, there were four different kinds of morphologies of discontinuous precipitated cellular γ′ at the grain boundaries. They were lamellae precipitates, short rod precipitates, granular precipitates and bidirectional parallel precipitates. When the aging temperature was between 650 ℃ and 740 ℃, the strength of the alloy increased rapidly due to the precipitation of a large number of intragranular spherical γ′, and the precipitation of grain boundary cellular γ′ was one of the main reasons for the toughness of alloy decreased rapidly above 740 ℃.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Development of new intermediate nickel alloys for application in automotive valves of high performance engines
2. High temperature materials for heavy duty diesel engines: historical and future trends10.1016/j.pmatsci.2018.10.004 ↗
3. The influence of heat treatment conditions on γ′ characteristics in Udimet® 72010.1016/j.msea.2004.01.027 ↗
4. Effects of heat treatments on the microstructure of IN792 alloy10.1016/j.msea.2009.10.026 ↗
5. Discontinuous precipitation and phase stability in Re-and Ru-containing nickel-base superalloys10.1007/s11661-011-0833-6 ↗
6. Reasons for the enhanced phase stability of Ru-containing nickel-based superalloys10.1016/j.actamat.2011.07.002 ↗
7. Precipitation behaviour of γ' phase in alloy 69310.1016/j.matchar.2016.07.007 ↗
8. Morphological evolution of γ′ precipitates in superalloy M4706 during thermal aging10.1016/j.matlet.2017.09.096 ↗
9. On the morphology of grain boundary discontinuous reactions and phase identification in an advanced Cr–Fe–Ni alloy10.1007/s10853-020-04690-8 ↗
10. Discontinuous precipitation and phase stability in re- and ru-containing nickel-base superalloys10.1007/s11661-011-0833-6 ↗
11. Multimodal discontinuous reaction in Ni-Fe-Cr-Al alloy10.1016/j.scriptamat.2020.113657 ↗
12. Grain boundary precipitation phenomena in an alloy 33 (Cr-Fe-Ni-N) subjected to direct-aging treatments (700°C and 900°C)10.1016/j.matchar.2018.03.046 ↗
13. Effect of temperature on tensile behavior of Ni–Cr–W based superalloy10.1016/j.msea.2010.11.053 ↗
14. Microstructural evolution and mechanical properties of a new Ni-based heat-resistant alloy during aging at 750℃10.1016/S1006-706X(17)30078-X ↗
15. Microstructural stability and tensile properties of a new γ′-hardened Ni-Fe-base superalloy
16. Effects of heat treatment on γ′ precipitates and tensile properties of a Ni-base superalloy10.1016/j.msea.2022.143079 ↗
17. Microstructure evolution and mechanical properties of disk superalloy under multiplex heat treatment10.1016/j.msea.2016.02.038 ↗
18. Effect of heat treatment on the microstructure and fracture behaviors of a Ni-Cr-Fe superalloy10.1002/adem.201901070 ↗
19. Influence of heat treatment on the microstructure and tensile properties of Ni-base superalloy haynes 28210.1016/j.msea.2016.10.048 ↗
20. Effect of heat treatment on the microstructure and mechanical properties of the modified 718 alloy10.1007/s40195-018-0790-9 ↗
21. Effect of aging heat treatment on the microstructure and creep properties of the cast ni-based superalloy at low temperature10.1007/s40195-018-0827-0 ↗
22. Discontinuous coarsening of aligned eutectoids. Croissance discontinue d′eutectoldes alignes10.1016/0001-6160(74)90103-5 ↗
23. Coarsening kinetics of γ' precipitates in cobalt-base alloys10.1016/j.actamat.2013.03.052 ↗
24. Gamma prime coarsening and age-hardening behaviors in a new nickel base superalloy10.1016/j.matlet.2003.10.053 ↗
25. Precipitate coarsening and its effects on the hot deformation behavior of the recently developed γ'-strengthened superalloys10.1016/j.jmst.2020.06.025 ↗
26. Application of a modified Ostwald ripening theory in coarsening of γ′ phases in Ni based single crystal superalloys10.1016/j.jallcom.2015.01.215 ↗
27. Influence of thermal exposure on γ′ precipitation and tensile properties of DZ951 alloy10.1016/j.matchar.2006.07.013 ↗
28. Review Progress in Ostwald ripening theories and their applications to the γ′-precipitates in nickel-base superalloys Part II Nickel-base superalloys10.1023/A:1015408116016 ↗
29. Discontinuous precipitation in Cu-Co alloys10.1016/0001-6160(81)90086-9 ↗
30. Sigma phase evolution in Co-Re-Cr-based alloys at 1100 °C10.1016/j.intermet.2013.11.003 ↗
31. The similarity between continuous and discontinuous precipitation10.1080/01418619308224763 ↗
32. The kinetics of the discontinuous precipitation and dissolution in Mg-rich Al alloys10.1023/A:1004753122411 ↗
33. M23C6 precipitation behavior and grain boundary serration in Ni-based Alloy 69010.1016/j.matchar.2014.07.008 ↗
34. Li · 1998 · 15
35. Precipitation behavior of M23C6 in high nitrogen austenitic heat-resistant steel10.1016/j.jallcom.2022.164013 ↗
36. Grain boundary discontinuous precipitation reactions10.1179/imr.1981.26.1.153 ↗
37. Early stages of discontinuous precipitation reaction in an advanced Cr-Fe-Ni alloy isothermally aged at 800°C10.1016/j.matchar.2021.111628 ↗
38. Discontinuous reactions in solids10.1179/095066001101528402 ↗
39. An electron backscatter diffraction analysis of grain boundary initiated discontinuous precipitation in U–10Mo10.1016/j.jnucmat.2019.151940 ↗
40. Optimum microstructure combination for maximizing tensile strength in a polycrystalline superalloy with a two-phase structure10.1016/j.actamat.2012.12.004 ↗
41. Effect of temperature on tensile behavior of Ni–Cr–W based superalloy10.1016/j.msea.2010.11.053 ↗