journal article·2023-09Open access

Unveiling the Enhanced Electrochemical Performance of LiNi0.5Mn0.3Co0.2O2 sol-gel coated with Li-La-Zr-O based gel

Semih Engün, Kamil Burak Dermenci, Umut Savacı, Cemal Can Erdoğan, Servet Turan

Abstract

The LiNi 0.5Mn 0.3Co 0.2O 2 (NMC532) cathode surface has been coated with LLZO using the citric acid-aided sol-gel technique by adjusting the coating ratio and the annealing temperature. As a result, a thin coating layer is obtained on the cathode surface. LaMO 3 formation is observed due to the diffusion of lanthanum ions during the high-temperature annealing process. Electrochemical examinations demonstrated that the electrochemical behaviour of coated samples improved compared to the uncoated sample. In particular, samples coated with 2 % LLZO with annealing temperatures higher than 700 °C deliver a desirable capacity retention of 92 % at 0.1 C after 100 cycles and an improved discharge capacity of 102 mA h g −1 at 1 C. Furthermore, electrochemical impedance spectroscopy measurement reveals that 2 % LLZO-coated samples with annealing above 700 °C have lower interface resistance than pristine NMC532. These findings provide a practical understanding of the NMC/LLZO coating interface in terms of phase formation and chemical composition and its effect on the electrochemical performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Lithium-ion battery structure that self-heats at low temperatures10.1038/nature16502 ↗
2. First-principles computational insights into lithium battery cathode materials
3. Improved cycle stability of high-capacity Ni-rich LiNi0.8Mn0.1Co0.1O2 at high cut-off voltage by Li2SiO3 coating10.1016/j.jpowsour.2017.01.066 ↗
4. Influence of graphene wrapped-cerium oxide coating on spherical LiNi0.5Mn1.5O4 particles as cathode in high-voltage lithium-ion batteries10.1016/j.jallcom.2022.165989 ↗
5. The effect of diamond-like carbon coating on LiNi0.8Co0.15Al0.05O2 particles for all solid-state lithium-ion batteries based on Li2S-P2S5 glass-ceramics10.1016/j.jpowsour.2016.02.088 ↗
6. Improvement of long-term cycling performance of Li[Ni0.8Co 0.15Al0.05]O2 by AlF3 coating10.1016/j.jpowsour.2013.01.045 ↗
7. Investigation of new manganese orthophosphate Mn3(PO4)2 coating for nickel-rich LiNi0.6Co0.2Mn0.2O2 cathode and improvement of its thermal properties10.1016/j.electacta.2016.03.079 ↗
8. Electrochemical behaviours of SiO2-coated LiNi0.8Co0.1Mn0.1O2 cathode materials by a novel modification method10.1016/j.jallcom.2015.10.177 ↗
9. Controllable construction of non-hydrophilic Cu-PmPD nanoshells on Ni-rich cathode materials in non-aqueous system for lithium-ion batteries10.1016/j.jallcom.2023.169264 ↗
10. Metal–organic frameworks and their derivatives as cathodes for lithium-ion battery applications: a review10.1007/s41918-021-00101-x ↗
11. Nanoscale coating of LiMO2 (M = Ni, Co, Mn) nanobelts with Li+-conductive Li2TiO3: toward better rate capabilities for Li-ion batteries10.1021/ja308717z ↗
12. Si particulate-reinforced ZnAl based composites joints of hypereutectic Al50Si alloys by ultrasonic-assisted soldering10.1016/j.matdes.2016.05.121 ↗
13. Effect of heat-treatment on Li2ZrO3-coated LiNi1/3Co1/3Mn1/3O2 and its high voltage electrochemical performance10.1016/j.jallcom.2015.08.114 ↗
14. Synthesis of Li2Si2O5-coated LiNi0.6Co0.2Mn0.2O2 cathode materials with enhanced high-voltage electrochemical properties for lithium-ion batteries10.1016/j.jallcom.2016.03.060 ↗
15. Cubic phase behavior and lithium ion conductivity of Li7La3Zr2O12 prepared by co-precipitation synthesis for all-solid batteries10.1016/j.jiec.2016.02.016 ↗
16. Solution processing of lithium-rich amorphous Li-La-Zr-O ion conductor and its application for cycling durability improvement of LiCoO2 cathode as coating layer10.1002/admi.202001767 ↗
17. Ionic conductor-LiNi 0.8 Co 0.1 Mn 0.1 O 2 composite synthesized by simultaneous co-precipitation for use in lithium ion batteries10.1149/2.0201813jes ↗
18. Valuation of surface coatings in high-energy density lithium-ion battery cathode materials10.1016/j.ensm.2021.03.015 ↗
19. Effect of the morphology of Li-La-Zr-O solid electrolyte coating on the electrochemical performance of spinel LiMn1.95Ni0.05O3.98F0.02 cathode materials
20. Enhanced electrochemical performance of Li 3V2(PO4)3/C coated with Li fast ion conductive Li7La3Zr2O1210.1149/2.1121707jes ↗
21. Enhanced electrochemical performance of Ni-rich cathode materials with Li1.3Al0.3Ti1.7(PO4)3 coating10.1021/acssuschemeng.9b05539 ↗
22. Surface coating of LiMn2O4 cathodes with garnet electrolytes for improving cycling stability of solid lithium batteries
23. Improved high-potential property of Ni-rich LiNi0.8Co0.1Mn0.1O2with a garnet ceramic LLZTO surface modification in Li-ion batteries10.1021/acsaem.1c02841 ↗
24. Enhanced electrochemical performance of ionic-conductor coated Li[Ni 0.7 Co 0.15 Mn 0.15]O 210.1149/2.0791712jes ↗
25. Li3PO4 surface coating on Ni-rich LiNi0.6Co0.2Mn0.2O2 by a citric acid assisted sol-gel method: improved thermal stability and high-voltage performance10.1016/j.jpowsour.2017.05.042 ↗
26. Structural insights on understanding the cubic phase stabilization mechanism of sol-gel synthesized Li7-3xAlxLa3Zr2O12 (x=0-0.4) - the effect of ZrOCl2 and ZrO(NO3)(2)10.1016/j.ceramint.2018.03.277 ↗
27. On fabrication procedures of Li-ion conducting garnets10.1016/j.jssc.2017.01.017 ↗
28. Origin of high Li+ conduction in doped Li7La3Zr2O12 garnets10.1021/acs.chemmater.5b02521 ↗
29. Improvement of electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material by graphene nanosheets modification10.1016/j.electacta.2014.10.093 ↗
30. Computation-guided discovery of coating materials to stabilize the interface between lithium garnet solid electrolyte and high-energy cathodes for all-solid-state lithium batteries
31. Chemical compatibility between garnet-like solid state electrolyte Li6.75La3Zr1.75Ta0.25O12 and major commercial lithium battery cathode materials
32. Mechanism study on the interfacial stability of a lithium garnet-type oxide electrolyte against cathode materials10.1021/acsaem.8b01035 ↗
33. LaNiO3 as a novel anode for lithium-ion batteries10.1007/s12209-020-00232-0 ↗
34. X. Zhang, F. Gendron, A. Mauger, L. Qi, C.M. Julien, Synthesis and Characterization of LiNi1/3Mn1/3Co1/3O2 by Wet-Chemical Method, ECS Meeting Abstracts. MA2008–02, 2008. 〈https://doi.org/10.1149/ma2008-02/7/600〉.10.1149/MA2008-02/7/600 ↗
35. A novel scalable thinning route to enhance long-term stability of layered cathode materials for Li-ion batteries10.1007/s10853-022-08057-z ↗
36. In situ and Operando Raman spectroscopy of layered transition metal oxides for Li-ion battery cathodes10.3389/fenrg.2018.00082 ↗
37. Enhanced electrochemical performance of LiNi0.8Co0.1Mn0.1O2with lithium-reactive Li3VO4coating
38. Surface modification of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials via a novel mechanofusion alloy route10.1016/j.ceramint.2020.06.023 ↗
39. Surface modification of Sr-doped LaMnO3 coating by spray drying on Ni-rich LiNi0.8Mn0.1Co0.1O2 cathode material for lithium-ion batteries10.1016/j.jtice.2019.06.006 ↗
40. Surface modification of LiMn2O4 cathode with LaCoO3 by a molten salt method for lithium ion batteries10.1016/j.ceramint.2020.10.225 ↗
41. Enhanced electrochemical performance of perovskite LaNiO3 coating on Li1.2Mn0.54Ni0.13Co0.13O2 as cathode materials for Li-ion batteries10.1016/j.electacta.2018.07.057 ↗
42. Improved electrochemical performance of La0.7Sr0.3MnO3 and carbon co-coated LiFePO4 synthesized by freeze-drying process10.1016/j.electacta.2009.08.020 ↗
43. Surface doping vs. bulk doping of cathode materials for lithium-ion batteries: a review10.1007/s41918-022-00155-5 ↗
44. Synergistic effects of ion doping and surface-modifying for lithium transition-metal oxide: synthesis and characterization of La2O3-modified LiNi1/3Co1/3Mn1/3O210.1016/j.electacta.2018.03.175 ↗