Nitride precipitation and formation in IN617 superalloy during creep
Source abstract
Abstract
Precipitation behaviors of four types of nitrides (including π phase (Cr 3.25Ni 1.75 N), AlN, Cr 2 N and TiN) were investigated in IN617 after creep rupture at 1000 °C/16 MPa. Nitride formation mechanisms were discussed based on their relative stabilities, crystallographic characteristics, and orientation relationships with the matrix. The influences of nitrides on creep rupture behaviors were discussed. The results indicated that the π phase, which was predicted unstable at 1000 °C by thermodynamical calculations, only precipitated at high-energy grain boundaries and phase boundaries. Thermodynamically stable AlN, Cr 2N and TiN could be formed at relatively low-energy sites, such as inside the matrix, at dislocations and twining boundaries. Particularly, AlN and Cr 2 N are polar crystals and have hcp structures, much different from the fcc matrix. They precipitated from the habit planes with low atomic misfits and grew into a needle shape to reduce the strain energy. Fcc TiN was easy to nucleate and had good coherence with the matrix, so it could either precipitate from the regions with high-density dislocations in a needle shape, or directly from the matrix in spherical or dendritic shapes to minimize the interfacial energy and strain energy. Among those nitrides, the π phase and AlN formed coarse intergranular networks and were difficult to deform and release stress, dominantly responsible for the brittle rupture mode.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. A review paper on aging effects in Alloy 617 for Gen IV nuclear reactor applications10.1115/1.2967885 ↗
2. Creep and creep-rupture of Alloy 61710.1016/j.nucengdes.2017.07.014 ↗
3. Assessment of creep damage models in the prediction of high-temperature creep behaviour of Alloy 61710.1016/j.ijpvp.2019.103974 ↗
4. Hydrogen production using high temperature nuclear reactors: efficiency analysis of a combined cycle10.1016/j.ijhydene.2015.11.190 ↗
5. An improved methodology for determining tensile design strengths of Alloy 61710.1007/s12206-011-1024-5 ↗
6. Influence of initial microstructure on creep deformation behaviors and fracture characteristics of Haynes 230 superalloy at 900 °C10.1016/j.matchar.2015.01.002 ↗
7. ANTARES: the HTR/VHTR project at Framatome ANP10.1016/j.nucengdes.2005.10.030 ↗
8. C.H. Oh, T. Lillo, W. Windes, T. Totemeier, B. Ward, R. Moore, R. Barner. Development of a Supercritical Carbon Dioxide Brayton Cycle: Improving VHTR Efficiency and Testing Material Compatibility, Idaho National Laboratory (INL), Report; INL/EXT-06-01271, 2006.
9. Tensile deformation behavior and microstructure evolution of Ni-based superalloy 61710.1016/j.jnucmat.2014.08.003 ↗
10. Investigation of creep rupture properties in air and He environments of alloy 617 at 800 °C10.1016/j.nucengdes.2016.04.042 ↗
11. Oxidation behaviour of an Alloy 617 in very high-temperature air and helium environments10.1016/j.ijpvp.2007.11.010 ↗
12. Microstructural investigation of Alloy 617 corroded in high-temperature helium environment10.1016/j.nucengdes.2013.11.051 ↗
13. High temperature corrosion of the nickel-based alloy Inconel 617 in helium containing small amounts of impurities10.1016/0025-5416(87)90374-0 ↗
14. Incipient oxidation kinetics of alloy 617 and residual stress of the oxide scale formed in air at temperatures between 850 and 1000°C10.1016/j.jnucmat.2012.01.015 ↗
15. Internal nitridation during creep of IN617 superalloy
16. Precipitate evolution during aging and its individual role on high-temperature hot corrosion response in Alloy 61710.1016/j.jallcom.2021.159499 ↗
17. Thermophysical properties of Ni based super alloy 61710.1016/j.jallcom.2016.12.183 ↗
18. Creep deformation of Alloys 617 and 276 at 750–950°C10.1016/j.msea.2009.05.029 ↗
19. Formation and stability of a nitride with the structure of beta manganese in Ni-Cr-N ternary system10.1007/BF02647321 ↗
20. Structure refinement for Cr2N10.1016/0022-5088(90)90446-Q ↗
21. Thermal expansion of AlN, sapphire, and silicon10.1063/1.1663432 ↗
22. Moire fringe method via scanning transmission electron microscopy10.1002/smtd.202101040 ↗
23. Maximizing phonon scattering efficiency by Cu2Se alloying in AgCuTe thermoelectric materials10.1039/D1TA10692A ↗
24. Effect of orientation on plastic deformations of Alloy 617 for VHTR applications10.1016/j.jnucmat.2013.07.061 ↗
25. Precipitate Redistribution during Creep of Alloy 61710.1007/s11661-009-0027-7 ↗
26. Temperature aging and corrosion study on Alloy 617 and Alloy 23010.1115/1.4002819 ↗
27. Oxidation and nitridation of alloy 800-H at a growing creep crack and for unstressed samples10.1007/BF02665510 ↗
28. Aluminum nitride in steel10.1179/imr.1988.33.1.221 ↗
29. Effect of solidifed grain boundary on interfacial creep failure behavior for steel/nickel dissimilar metal welded joint10.1016/j.msea.2020.140482 ↗
30. Strain-induced precipitation in a Ti micro-alloyed HSLA steel10.1016/j.msea.2011.09.062 ↗
31. Ti(CN) precipitation in microalloyed austenite during stress-relaxation10.1007/BF02674015 ↗
32. Dynamic precipitation and coarsening of niobium carbonitrides during the hot compression of HSLA steels10.1007/BF02654564 ↗
33. Precipitation of NbC in a model austenitic steel10.1016/S1359-6454(01)00389-5 ↗
34. Modeling of the kinetics of carbonitride precipitation process in high-strength low-alloy steels using cellular automata method10.1007/s11665-019-04170-4 ↗
35. Strain induced precipitation of complex carbonitrides in Nb-V and Ti-V microalloyed steels10.1016/j.scriptamat.2005.07.003 ↗
36. Effect of composition and process variables on Nb(C, N) precipitation in niobium microalloyed austenite10.1179/mst.1987.3.3.197 ↗
37. Effect of magnetic field on interfacial energy and precipitation behavior of carbides in reduced activation steels10.1016/j.matlet.2010.12.041 ↗
38. The measurement of solid-liquid interfacial energy in colloidal suspensions using grain boundary grooves10.1080/14786435.2010.527306 ↗
39. The effect of elastic interaction energy on the morphology of γ'-precipitates in nickel-based alloys10.1016/0025-5416(84)90056-9 ↗
40. Theoretical-analysis of strain-induced shape changes in cubic precipitates during coarsening10.1016/0001-6160(88)90224-6 ↗
41. Precipitation and dissolution processes in γ/γ' single crystal nickel-based superalloys10.1016/S0921-5093(98)00795-3 ↗
42. Size and shape effects for gamma prime in alloy 73810.1007/s11665-007-9135-y ↗
43. Effects of microstructure on the creep properties of a new Ni-Co base superalloy10.1016/j.msea.2016.09.060 ↗
44. Microstructure evolution and mechanical properties of disk superalloy under multiplex heat treatment10.1016/j.msea.2016.02.038 ↗
45. Dissolution behaviour of the γ' precipitates in two kinds of Ni-based superalloys10.1179/1878641315Y.0000000006 ↗
46. Nanoindentation studies of the mechanical behaviours of spark plasma sintered multiwall carbon nanotubes reinforced Ti6Al4V nanocomposites10.1016/j.msea.2019.138320 ↗
47. Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting10.1016/j.msea.2017.01.096 ↗
48. Effect of volume fraction on mechanical properties of Zr/ZrN multilayer systems10.1016/j.ceramint.2016.09.025 ↗
49. Structural, mechanical and corrosion behaviors of the homogeneous and gradient CrAlSiN coatings in 3.5% NaCl solution10.1016/j.jmrt.2021.09.098 ↗
50. Effect of β-Al5FeSi and π-Al8Mg3FeSi6 phases on the impact toughness and fractography of Al–Si–Mg-based alloys10.1007/s40962-017-0153-8 ↗
51. Influence of N on precipitation behavior, associated corrosion and mechanical properties of super austenitic stainless steel S3265410.1016/j.jmst.2019.10.011 ↗
52. Oxidation behavior of the directionally solidified Ni-base superalloy DS951 in air, Oxid