Branched CuxAuy nanoalloy with controllable atomic ratios and "clean surface": Synthesis and their superior performances in hydrogen evolution reaction and biosensors
Source abstract
Abstract
Narrow detection range and restricted durability of electrocatalysis are the two challenges for biosensors and hydrogen generation. This work provided a one-pot synthesis of branched Cu xAu y nano-alloy with controllable atomic ratio and “clean surface” by a mild co-reduction. Different from conventional method that applied an elevated temperature or pressure, the atomic ratio of Cu xAu y alloy was tailored by controlling kinetics parameters. And the no surfactant process resulted in a "clean surface". The “clean surface” coupled with an optimal atomic ratio enabled Cu 38Au 62 alloy a superior biosensor performance. As applied in nitrite detection, the sensor by surface cleaned Cu 38Au 62 alloy could achieve the wide detection range up to 125.0 mM. On the contrary, sensor performance for the CuAu alloy by surfactant-assisted was negligible. It is suggested that an optimal atomic ratio for Cu xAu y would not only rationalize the cost but also be beneficial to their biosensor performance. In the glucose detection, sensitivity for sensor by Cu 38Au 62 alloy is 718.43 µA/mM·cm 2 from 0 to 150 mM (by linear sweep voltammetry), which is much superior to that by other Cu xAu y nano-alloy. The constructed glucose sensor was further applied to detect sugar content for coca-cola. The synergistic effect of Cu and Au atoms could also accelerate the H 2 deprivation. And the volcano plots for overpotential by Cu xAu y alloy were also summarized. In the hydrogen evolution reaction (HER) process, it is verified that the reconstruction of Cu xAu y alloy surface would not only overcome the activity degradation but bring out a reduced overpotential.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Electrochemical Analysis and Applications · Advanced biosensing and bioanalysis techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Ultrafine Cu6Sn5 nanoalloys supported on nitrogen and sulfur-doped carbons as robust electrode materials for oxygen reduction and Li-ion battery10.1016/j.jallcom.2020.153958 ↗
2. Strengthening nitrogen affinity on CuAu@Cu core–shell nanoparticles with ultrathin Cu skin via strain engineering and ligand effect for boosting nitrogen reduction reaction10.1016/j.apcatb.2021.119999 ↗
3. Theoretical insights on au-based bimetallic alloy electrocatalysts for nitrogen reduction reaction with high selectivity and activity10.1002/cssc.202101462 ↗
4. Ultrathin porous g-C3N4 nanosheets modified with AuCu alloy nanoparticles and C-C coupling photothermal catalytic reduction of CO to ethanol10.1016/j.apcatb.2020.118618 ↗
5. Design of nanocatalyst for electrode structure: electrophoretic deposition of iron phosphide nanoparticles to produce a highly active hydrogen evolution reaction catalyst10.1016/j.cej.2021.133217 ↗
6. Development of ZnCo alloy enclosed in N-doped carbon with hexagonal close packing crystal phase inspires potential oxygen evolution reaction10.1016/j.jallcom.2022.166439 ↗
7. Research of high entropy alloys as electrocatalyst for oxygen evolution reaction10.1016/j.jallcom.2022.164669 ↗
8. Ligand-free monophasic CuPd alloys endow boosted reaction kinetics toward energy-efficient hydrogen fuel production paired with hydrazine oxidation10.1016/j.jmst.2022.09.043 ↗
9. Novel SWCNTs-mesoporous silicon nanocomposite as efficient non-enzymatic glucose biosensor10.1016/j.apsusc.2021.149477 ↗
10. Robust Cu-Au alloy nanowires flexible transparent electrode for asymmetric electrochromic energy storage device10.1016/j.cej.2021.131438 ↗
11. Steric effect induces CO electroreduction to CH4 on Cu–Au alloys10.1039/D1TA06162C ↗
12. Recent advances and perspectives of nanostructured amorphous alloys in electrochemical water electrolysis10.1021/acs.energyfuels.1c02706 ↗
13. Alloy nanostructured catalysts for cathodic reactions in energy conversion and fuel generation10.1021/acs.energyfuels.1c02122 ↗
14. Alloy electrocatalysts
15. Platinum monolayers stabilized on dealloyed AuCu core-shell nanoparticles for improved activity and stability on methanol oxidation reaction10.1016/j.cclet.2019.06.018 ↗
16. Elucidating growth mechanism and shape evolution of highly branched PtNi alloy nanocrystals and their electrocatalytic performance10.1016/j.jallcom.2022.166867 ↗
17. Bidirectional controlling synthesis of branched PdCu nanoalloys for efficient and robust formic acid oxidation electrocatalysis10.1016/j.jcis.2021.05.018 ↗
18. Seed‐mediated growth of colloidal metal nanocrystals10.1002/anie.201604731 ↗
19. A controlled growth of triangular AuCu alloy nanostars and high photocatalytic activities of AuCu@CdS heterostars10.1039/D0TC00098A ↗
20. Colloidal Au–Cu alloy nanoparticles: synthesis, optical properties and applications10.1039/C7QM00538E ↗
21. Cu nanowires with clean surfaces: synthesis and enhanced electrocatalytic activity10.1021/acsami.6b09717 ↗
22. Cu nanoplates with “clean surface”: synthesis and their enhanced biosensors performance10.1016/j.jiec.2022.01.026 ↗
23. Development of non-enzymatic cholesterol bio-sensor based on TiO2 nanotubes decorated with Cu2O nanoparticles10.1016/j.snb.2019.127200 ↗
24. Cu NWs@Pd with controllable diameter: synthesis and their enhanced sensor performances in the detection of glucose and H2O210.1007/s11051-022-05431-5 ↗
25. One-pot synthesis of uniform Cu nanowires and their enhanced non-enzymatic glucose sensor performance10.1007/s10853-020-05617-z ↗
26. Towards green synthesis of monodisperse Cu nanoparticles: An efficient and high sensitive electrochemical nitrite sensor10.1016/j.snb.2018.03.141 ↗
27. Electrocatalytic CuBr@CuO nanoparticles based salivary glucose probes10.1016/j.bios.2021.113610 ↗
28. Electrochemical glucose sensors in diabetes management: an updated review10.1039/D0CS00304B ↗
29. Highly branched gold-copper nanostructures for non-enzymatic specific detection of glucose and hydrogen peroxide10.1007/s00604-020-04542-x ↗
30. Nanoporous PdCu alloy as an excellent electrochemical sensor for H2O2 and glucose detection10.1016/j.jcis.2016.12.041 ↗
31. Surface cleaned CuxPdy alloy: Synthesis and their superior performances in hydrogen evolution reaction and biosensor
32. An environmentally friendly route to synthesize Cu micro/nanomaterials with “sustainable oxidation resistance” and promising catalytic performance10.1039/C6RA02039A ↗
33. AuCu intermetallic nanoparticles: surfactant-free synthesis and novel electrochemistry10.1039/c2jm32264a ↗
34. Electrochemical sensor for nitrite using a glassy carbon electrode modified with gold-copper nanochain networks10.1007/s00604-015-1717-z ↗
35. Core-shell Au@ Ag nanoparticles on carboxylated graphene for simultaneous electrochemical sensing of iodide and nitrite10.1016/j.snb.2021.130319 ↗
36. High-valence Mo (VI) derived from in-situ oxidized MoS2 nanosheets enables enhanced electrochemical responses for nitrite measurements10.1016/j.snb.2021.129812 ↗
37. Development of an innovative nitrite sensing platform based on the construction of carbon-layer-coated In2O3 porous tubes10.1016/j.snb.2020.129082 ↗
38. Non-enzymatic electrochemical sensor for nitrite based on a graphene oxide–polyaniline–Au nanoparticles nanocomposite
39. Electrochemical sensor for nitrite using a glassy carbon electrode modified with gold-copper nanochain networks10.1007/s00604-015-1717-z ↗
40. Integrating electrochemical sensor based on MoO3/Co3O4 heterostructure for highly sensitive sensing of nitrite in sausages and water
41. Electrochemical detection of nitrite at NiFe2O4 nanoparticles synthesised by solvent deficient method10.1016/j.electacta.2019.06.026 ↗
42. First-principles study on the Cu-Au alloy monolayer supported on WC for hydrogen evolution10.1016/j.apsusc.2021.150568 ↗