Influence of Ti addition on the precipitation behavior and mechanical properties of Ni-7.9Cr-5.9W-22.2Mo superalloy
Source abstract
Abstract
The Ni-7.9Cr-5.9W-22.2Mo-1.4Ti superalloy based on Ni-8Cr-6W-22.5Mo (the Haynes 244 alloy) was prepared to investigate the effect of Ti addition on the precipitation behavior and mechanical properties. The results indicate that the addition of Ti can facilitate the formation of C11 b and D0 22 superlattice phases simultaneously after age-treated at 650 °C for 240 h. The yield strength is significantly improved to 1645 MPa compared with Ni-8Cr-6 W-22.5Mo with only the formation of C11 b and a yield strength of 1297 MPa. The excellent strengthening effect of C11 b and D0 22 superlattice phases are attributed to both order strengthening and coherency strengthening, and their calculated contributions to strengthening are 148 MPa and 439 MPa for D0 22 and 83 MPa and 208 MPa for and C11 b , respectively. Together with solid-solution strengthening and grain refinement strengthening, the theoretically calculated yield strength matches well with the experimental results. In addition, the deformation mode changes from deformation slip to strain-induced twinning after the Ti addition.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Hot working characteristic of as-cast and homogenized Ni–Cr–W superalloy10.1016/j.msea.2008.12.032 ↗
2. Influence of temperature on passive film properties on Ni–Cr–Mo Alloy C-200010.1016/j.corsci.2013.07.016 ↗
3. Hold time effects on low cycle fatigue behavior of HAYNES 230 superalloy at high temperatures10.1016/j.msea.2005.05.120 ↗
4. Influence of Nb addition on the oxidation behavior of novel Ni-base superalloy10.1016/j.corsci.2021.109436 ↗
5. Stabilization of a D022 phase in Ni–Cr–Mo–W–Ti alloys10.1007/s11661-021-06404-4 ↗
6. Correlation between disorder-order transformations in a Ni-based alloy and its mechanical properties10.1016/j.msea.2018.02.033 ↗
7. Influence of Mo concentration on corrosion resistance to HF acid solution of Ni–Co–Cr–Mo alloys with and without Cu10.1016/j.corsci.2015.07.004 ↗
8. Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy10.1016/j.msea.2012.03.092 ↗
9. Optimization of solid-state diffusion bonding of Hastelloy C-22 for micro heat exchanger applications by coupling of experiments and simulations10.1016/j.msea.2012.01.056 ↗
10. Characterization of complex carbide-silicide precipitates in a Ni-Cr-Mo-Fe-Si alloy modified by welding10.1016/j.matchar.2015.05.001 ↗
11. Mechanical properties of ground state structures in substitutional ordered alloys: High strength, high ductility and high thermal stability10.1016/j.msea.2014.02.085 ↗
12. Probing long-range ordering in nickel-base alloys with proton irradiation10.1016/j.actamat.2018.06.043 ↗
13. Generation of high-performance Ni-Cr-Mo-based superalloys via γ to DO22 superlattice ordered phase transformation upon addition of trace alloying elements10.1016/j.msea.2018.09.093 ↗
14. Abnormal kinetics of ordering transformation in Ni2(Cr0.5, Mo0.5) alloy10.1016/j.jallcom.2015.03.157 ↗
15. Delineating the roles of Cr and Mo during ordering transformations in stoichiometric Ni2(Cr1− x,Mox) alloys10.1016/j.actamat.2015.06.022 ↗
16. Order-disorder reaction in Alloy 60010.1016/S0921-5093(99)00640-1 ↗
17. Precipitation of nanosized D022 superlattice with high thermal stability in an Ni-Cr-W superalloy10.1016/j.scriptamat.2013.12.013 ↗
18. Microstructure evolution during the precipitation and growth of fully coherent DO22 superlattice in an Ni-Cr-W alloy10.1016/j.matchar.2016.06.001 ↗
19. New insights into serrated flow in Pt2Mo-type superlattice strengthened Ni–Cr–Mo alloy at room temperature10.1016/j.matlet.2015.10.075 ↗
20. Optimization of mechanical properties of a Ni–Mo–Cr alloy by structural modifications induced by changes in heat treatment10.1016/S0921-5093(01)01104-2 ↗
21. Mechanical properties of an aged Ni-Cr-Mo alloy and effect of long-range order phase on deformation behavior10.1016/j.msea.2018.06.032 ↗
22. Overcoming high-temperature strength-ductility trade-off by combination deformation twinning of C11b and D022 superlattices in a Ni-Cr-W/Mo-based superalloy10.1016/j.scriptamat.2022.114931 ↗
23. Callister · 2020
24. The effect of Ti on precipitation of fully coherent D022 superlattice in an Ni-Cr-W-based superalloy10.1016/j.scriptamat.2017.02.037 ↗
25. Singh · 2022
26. The Engel-Brewer theories of metals and alloys10.1016/0079-6425(68)90022-4 ↗
27. The role of alloying elements in the design of nickel-base superalloys10.1007/BF00549796 ↗
28. Mechanical and microstructural characterization of AF955 (UNS N09955) nickel-based superalloy after different heat treatments10.1007/s11661-018-4876-9 ↗
29. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
30. Laws for work-hardening and low-temperature creep10.1115/1.3443340 ↗
31. Correlation between mechanism of ordering transformation and microstructure of interfaces in Ni-Cr-W superalloys10.1016/j.matlet.2016.05.188 ↗
32. Design of D022 superlattice with superior strengthening effect in high entropy alloys10.1016/j.actamat.2019.01.048 ↗
33. Overcoming the strength-ductility trade-off via the formation of nanoscale Cr-rich precipitates in an ultrafine-grained FCC CrFeNi medium entropy alloy matrix10.1016/j.msea.2019.138107 ↗
34. Interphase precipitation of nanometer-sized carbides in a titanium–molybdenum-bearing low-carbon steel10.1016/j.actamat.2011.06.037 ↗
35. Precipitation strengthening in titanium microalloyed high-strength steel plates with new generation thermomechanical controlled processing (NG-TMCP)10.1016/j.jallcom.2016.08.010 ↗
36. Nanoscale cementite and microalloyed carbide strengthened Ti bearing low carbon steel plates in the context of newly developed ultrafast cooling10.1016/j.msea.2017.05.066 ↗
37. An estimate of the strengthening arising from coherent, tetragonally-distorted particles10.1016/0025-5416(74)90020-2 ↗
38. Precipitation hardening10.1007/BF02670416 ↗
39. Deformation behaviour of γ″ strengthened inconel 71810.1016/0001-6160(88)90139-3 ↗
40. Reed · 2008
41. The determining role of carbon addition on mechanical performance of a non-equiatomic high-entropy alloy10.1016/j.jmst.2021.09.005 ↗
42. Mechanical properties and strengthening of a Ni-25Mo-8Cr alloy containing Ni2(Mo,Cr) precipitates10.1016/S1359-6454(96)00092-4 ↗