Enhancing structural stability of NaCrO2 by Nb-substituting for sodium-ion battery
Source abstract
Abstract
As an attractive cathode material, the layered sodium chromium oxide NaCrO 2 (NCO) can provide a reversible capacity of around 120 mAh g −1 between 2.0 and 3.6 V, which corresponds to about 0.5 Na per formula is extracted/inserted. However, irreversible phase transition happens in Na xCrO 2 when x is less than 0.4 and the potential is exceeding 3.6 V vs. Na + /Na. To improve its high-potential structural stability, Nb 5+ is introduced to Cr 3+ site by a sol-gel method successfully in this study. The influences of Nb 5+ doping on the crystal structure and electrochemical properties are explored. As a result, a more stable structure as well as a higher ionic conductivity are achieved in Na 0.94Cr 0.97Nb 0.03O 2 (NCO-Nb3), exhibiting better rate performance and cycling stability between 2.0 and 3.6 V and 2.0–3.7 V. When elevating the charging cut-off voltage to 3.8 V, 4.0 V, 4.4 V, the initial coulombic efficiencies of NCO-Nb3 are still significantly higher than those of pristine NCO.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Alternative energy technologies10.1038/35104599 ↗
2. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
3. Sodium-ion batteries
4. Sodium-ion batteries: present and future10.1039/C6CS00776G ↗
5. Review—research progress on layered transition metal oxide cathode materials for sodium ion batteries10.1149/1945-7111/abf9bf ↗
6. Spinel/post-spinel engineering on layered oxide cathodes for sodium-ion batteries10.1016/j.esci.2021.10.003 ↗
7. Advanced characterizations and measurements for sodium-ion batteries with NASICON-type cathode materials10.1016/j.esci.2021.12.008 ↗
8. High-abundance and low-cost metal-based cathode materials for sodium-ion batteries: problems, progress, and key technologies
9. The cathode choice for commercialization of sodium-ion batteries: layered transition metal oxides versus prussian blue analogs
10. Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO210.1016/j.elecom.2009.12.033 ↗
11. NaCrO2 is a fundamentally safe positive electrode material for sodium-ion batteries with liquid electrolytes10.1149/2.002201esl ↗
12. New insight into structural evolution in layered NaCrO2 during electrochemical sodium extraction10.1021/jp5105888 ↗
13. Layered-to-rock-salt transformation in desodiated NaxCrO2 (x 0.4)10.1021/acs.chemmater.5b04626 ↗
14. Cycle performance improvement of NaCrO2 cathode by carbon coating for sodium ion batteries10.1016/j.elecom.2012.06.001 ↗
15. NaCrO2 cathode for high-rate sodium-ion batteries10.1039/C5EE00695C ↗
16. Properties of an intermediate temperature ionic liquid NaTFSA–CsTFSA and charge–discharge properties of NaCrO2 positive electrode at 423K for a sodium secondary battery10.1016/j.jpowsour.2011.11.086 ↗
17. Electrochemical and structural investigation of NaCrO2 as a positive electrode for sodium secondary battery using inorganic ionic liquid NaFSA–KFSA10.1016/j.jpowsour.2013.03.006 ↗
18. Effect of nanosizing on reversible sodium storage in a NaCrO2 electrode10.1021/acsanm.7b00207 ↗
19. Ultralong layered NaCrO2 nanowires: a competitive wide-temperature-operating cathode for extraordinary high-rate sodium-ion batteries10.1021/acsami.8b20149 ↗
20. Phase transition behavior of NaCrO2 during sodium extraction studied by synchrotron-based X-ray diffraction and absorption spectroscopy10.1039/c3ta12282d ↗
21. Stabilizing NaCrO2 by sodium site doping with calcium10.1149/2.1041910jes ↗
22. Enhancing the electrochemical performance of an O3–NaCrO2 cathode in sodium-ion batteries by cation substitution10.1016/j.jpowsour.2019.226760 ↗
23. A high-performance layered Cr-based cathode for sodium-ion batteries10.1016/j.nanoen.2019.104215 ↗
24. Cationic and transition metal co-substitution strategy of O3-type NaCrO2 cathode for high-energy sodium-ion batteries10.1016/j.ensm.2021.05.046 ↗
25. Rational material design of Li-excess metal oxides with disordered rock salt structure
26. P2-type layered Na0.67Cr0.33Mg0.17Ti0.5O2 for Na storage applications10.1039/D1CC00304F ↗