journal article·2022-11

On the structure-properties relationship of amorphous and crystalline silica nanoparticles reinforced magnesium matrix nanocomposites

Hasan Kaser Issa, Ali Maleki, Aboozar Taherizadeh, Alireza Zargaran

Publisher page

Abstract

In this study, the structure-properties relationship of magnesium matrix nanocomposites was studied. Using an accumulative extrusion (AE) process, the matrix was reinforced by adding 0.25, 0.5 and 1 wt% crystalline and amorphous silica nanoparticles separately. The mechanical behavior of nanocomposite strips was investigated by hardness and uniaxial compression tests. The results indicated that the Mg/0.5%SiO 2 -Am had the best room temperature compressive properties. An increase of 28.5% in compressive yield strength after extrusion and 235% after annealing was measured. Ultimate compressive strength (UCS) was increased by 20% without reduction in the nanocomposite ductility compared to the pure magnesium strip. FESEM and OM were used for microstructural analysis and revealed no visible cracks or distinct defects between magnesium layers after AE passes. It is found from the EDS analysis that the reinforcement distribution after the AE process was uniform with few agglomerates. Texture analysis using X-ray diffraction and EBSD after the AE process for samples reinforced with 0.5 wt% of amorphous and crystalline silica nanoparticles indicated a negligible difference in the basal plane orientation of the monolithic and nanocomposite magnesium strips after the AE process along extrusion direction. On the other hand, increasing the basal plane peak intensity after annealing for the sample reinforced with amorphous silica compared to the sample reinforced with crystalline silica indicated a weakening of basal texture. Furthermore, the EBSD analysis showed that amorphous silica nanoparticles are more effective than crystalline silica in grain refinement.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. M.S. Bomberg, A.T. Planner, K.M. Kockelman, M. Thompson, C.D.M. Smith, Greenhouse gas emission control options: assessing transportation and electricity generation technologies and policies to stabilize climate change, 2009.
2. Effect of 1Al addition on deformation behavior of Mg10.1016/j.jma.2020.09.016 ↗
3. Magnesium: current and potential automotive applications10.1007/BF02701073 ↗
4. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
5. A review on environment friendly and lightweight Magnesium-Based metal matrix composites and alloys10.1016/j.matpr.2020.07.424 ↗
6. Designing a magnesium alloy with high strength and high formability10.1038/s41467-018-04981-4 ↗
7. Tension–compression asymmetry in an extruded Mg alloy AM30: temperature and strain rate effects10.1016/j.msea.2013.02.023 ↗
8. Qualitative model for creep of AZ91D magnesium alloy10.1007/s11661-001-0224-5 ↗
9. Effect of volume fraction and particle size on the microstructure and plastic deformation of Mg–Y2O3 composites10.1016/j.msea.2006.01.026 ↗
10. Microstructure and mechanical properties of SiCp/AZ91 composite processed with extrusion and EPT10.1080/02670836.2021.1885579 ↗
11. An overview of production technologies and its application of metal matrix composites
12. Reactive stir mixing of Al–Mg/Al 2 O 3np metal matrix nanocomposites: effects of Mg and reinforcement concentration and method of reinforcement incorporation10.1007/s10853-013-7903-7 ↗
13. Enhancing physical and mechanical properties of Mg using nanosized Al 2 O 3 particulates as reinforcement10.1007/s11661-005-0344-4 ↗
14. Development of novel Mg–Ni60Nb40 amorphous particle reinforced composites with enhanced hardness and compressive response10.1016/j.matdes.2013.07.022 ↗
15. Effect of hot extrusion on microstructures and mechanical properties of SiC nanoparticles reinforced magnesium matrix composite10.1016/j.jallcom.2011.09.099 ↗
16. Enhancing overall tensile and compressive response of pure Mg using nano-TiB2 particulates10.1016/j.matchar.2014.05.021 ↗
17. A magnesium alloy matrix composite reinforced with metallic glass10.1016/j.compscitech.2009.08.001 ↗
18. Development of high performance magnesium composites using Ni50Ti50 metallic glass reinforcement and microwave sintering approach10.1016/j.jallcom.2014.12.009 ↗
19. A novel and facile method for silica nanoparticles synthesis from high temperature vulcanization (HTV) silicon10.30544/134 ↗
20. Evolution of microstructure and mechanical properties of AZ31 Mg alloy sheets processed by accumulated extrusion bonding with different relative orientation10.1016/j.jallcom.2019.01.091 ↗
21. Improved strength and ductility of AZ31B Mg alloy sheets processed by accumulated extrusion bonding with artificial cooling10.1016/j.jma.2020.06.022 ↗
22. B. Beausir, J.J. Fundenberger, Analysis Tools for Electron and X-ray Diffraction, ATEX-Software, Www. Atex-Software. Eu, Univ. Lorraine-Metz, 2017.
23. In situ identification of twin-related bands near yielding in a magnesium alloy10.1016/j.scriptamat.2012.09.009 ↗
24. Deformation twinning in AZ31: influence on strain hardening and texture evolution10.1016/j.actamat.2010.07.041 ↗
25. Role of {10–12} twinning characteristics in the deformation behavior of a polycrystalline magnesium alloy10.1016/j.actamat.2010.07.002 ↗
26. Development of rare-earth oxide reinforced magnesium nanocomposites for orthopaedic applications: a mechanical/immersion/biocompatibility perspective10.1016/j.jmbbm.2020.104162 ↗
27. Effect of nanoscale boron carbide particle addition on the microstructural evolution and mechanical response of pure magnesium10.1016/j.matdes.2013.11.031 ↗
28. Effect of microalloying with rare-earth elements on the texture of extruded magnesium-based alloys10.1016/j.scriptamat.2008.06.008 ↗
29. Texture weakening and ductility variation of Mg–2Zn alloy with CA or RE addition10.1016/j.msea.2015.08.025 ↗
30. Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response10.1016/j.jallcom.2014.06.163 ↗
31. Analysis of texture evolution in pure magnesium and the magnesium alloy AM30 during rod and tube extrusion10.1016/j.msea.2011.01.021 ↗
32. Texture analysis in hexagonal materials10.1016/S0254-0584(03)00168-8 ↗
33. Evolution of texture and asymmetry and its impact on the fatigue behaviour of an in-situ magnesium nanocomposite10.1016/j.msea.2018.04.101 ↗
34. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles10.1038/nature16445 ↗
35. On the interaction of inclusions with migrating grain boundaries
36. Interaction of recrystallization and precipitation: the effect of Al3Sc on the recrystallization behaviour of deformed aluminium10.1016/S1359-6454(03)00002-8 ↗
37. Humphreys · 2012
38. Atomistic-level study of the mechanical behavior of amorphous and crystalline silica nanoparticles10.1016/j.ceramint.2020.05.272 ↗