journal article·2022-11

Breaking the trade-off between strength and ductility in nanostructured CrCoNi-based medium-entropy alloys by promoting twinning kinetics

Tengfei Jing, Huaibei Zheng, Qi Liao, Lingxi Song, Qixuan Guo, Huabei Peng, Yuhua Wen

Publisher page

Abstract

The ternary equiatomic CrCoNi medium-entropy alloys (MEAs) generally suffer from a low strength, which can be improved by mechanical nanotwins induced by cryogenic deformation. After adding Si and reducing the content of Ni, the mechanical twinning in the CrCoNiSi MEA is easy to occur at room temperature (RT), resulting in a higher strain hardening rate to delay necking. After 30% tensile deformation, a lot of thinner mechanical nanotwins are introduced into the CrCoNiSi MEA. After annealing at 773 K for 30 min, the mechanical nanotwins in the nanostructured CrCoNiSi MEA are retained. The production of strength and ductility of the nanostructured CrCoNiSi MEA is 42 GPa·%, which is 26% higher than that of the nanostructured CrCoNi MEA. In addition, the phase transformation from FCC phase to HCP phase in the CrCoNiSi MEA during tensile deformation is responsible for a higher strain hardening rate and a better elongation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures10.1038/ncomms10602 ↗
2. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
3. High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships10.1016/j.cossms.2011.04.002 ↗
4. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
5. Ultrahigh strength and high electrical conductivity in copper10.1126/science.1092905 ↗
6. Mechanical properties and rolling behaviors of nano-grained copper with embedded nano-twin bundles10.1016/j.actamat.2008.01.030 ↗
7. Combined strengthening from nanotwins and nanoprecipitates in an iron-based superalloy10.1016/j.actamat.2018.04.001 ↗
8. Development of a heterogeneous nanostructure through abnormal recrystallization of a nanotwinned Ni superalloy10.1016/j.actamat.2020.05.057 ↗
9. Strength and ductility of 316L austenitic stainless steel strengthened by nano-scale twin bundles10.1016/j.actamat.2011.11.009 ↗
10. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
11. Strengthening an austenitic Fe-Mn steel using nanotwinned austenitic grains10.1016/j.actamat.2012.03.035 ↗
12. Nanostructured steel with high work-hardening by the exploitation of the thermal stability of mechanically induced twins10.1016/j.scriptamat.2009.01.004 ↗
13. Enhancement of strength-ductility combination in recovery-annealed Fe-Mn-C twinning-induced plasticity steels by Si alloying
14. On the relationship between work hardening and twinning rate in TWIP steels10.1016/j.msea.2012.01.123 ↗
15. Effects of stacking fault energy on deformation mechanisms in Al-added medium Mn TWIP steel10.1007/s11661-019-05274-1 ↗
16. Stacking fault energies of face-centered cubic concentrated solid solution alloys10.1016/j.actamat.2017.05.001 ↗
17. Stress-induced martensitic transformation behaviors at various temperatures and their TRIP effects in SUS304 metastable austenitic stainless steel10.2355/isijinternational.51.124 ↗
18. Effect of stacking faults on the ductility of Fe-18Mn-1.5Al-0.6C twinning-induced plasticity steel at low temperatures10.1016/j.scriptamat.2017.04.037 ↗
19. Modulating the prestrain history to optimize strength and ductility in CoCrFeMnNi high-entropy alloy10.1016/j.scriptamat.2019.01.012 ↗
20. The effects of Si on the mechanical twinning and strain hardening of Fe-18Mn-0.6C twinning-induced plasticity steel10.1016/j.actamat.2013.02.031 ↗
21. Thermodynamic calculation of stacking fault energy of the Fe-Mn-Si-C high manganese steels10.1016/j.msea.2014.01.046 ↗
22. Effect of silicon addition on the microstructures, mechanical properties and helium irradiation resistance of NiCoCr-based medium-entropy alloys10.1016/j.jallcom.2020.156162 ↗
23. Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off10.1016/j.matdes.2020.109202 ↗
24. The oxidation behavior of the quinary FeCoNiCrSix high-entropy alloys10.1016/j.matchemphys.2017.06.017 ↗
25. Measurements of stacking-fault energies in Co-Ni and Co-Ni-Cr alloys10.1016/0001-6160(67)90123-X ↗
26. Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy10.1007/s11837-013-0771-4 ↗
27. Comparison of work hardening and deformation twinning evolution in Fe-22Mn-0.6C-(1.5Al) twinning-induced plasticity steels10.1016/j.scriptamat.2013.02.060 ↗
28. Homogeneously introducing more and thinner nanotwins by engineering annealing twin boundaries: a TWIP steel as an example
29. Microstructural characterization of stress-induced martensites evolved at low temperature in deformed powders of Fe-Mn-C alloys by the Rietveld10.1016/S0925-8388(02)00495-4 ↗
30. Characterisation of microstructure of isothermal martensite in Fe-23Ni-3.8Mn by Rietveld10.1016/S0925-8388(98)00583-0 ↗
31. Severe plastic deformation of 6061 aluminum alloy tube with pre and post heat treatments10.1016/j.msea.2012.11.025 ↗
32. On the nature of twin boundary-associated strengthening in Fe-Mn-C steel10.1016/j.scriptamat.2018.07.009 ↗
33. Yield strength increase of a CoCrNi medium entropy alloy by interstitial nitrogen doping at maintained ductility10.1016/j.scriptamat.2019.12.007 ↗
34. Fine tuning of tensile properties in CrCoNi medium entropy alloy through cold rolling and annealing10.1016/j.intermet.2019.106578 ↗
35. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
36. Achieving high strength and high ductility in Al0.3CoCrNi medium-entropy alloy through multi-phase hierarchical microstructure10.1016/j.mtla.2019.100442 ↗
37. Tailoring mechanical properties of a CoCrNi medium-entropy alloy by controlling nanotwin-HCP lamellae and annealing twins10.1016/j.msea.2018.11.143 ↗
38. Achieving ultra-high strength in a precipitation-hardened CoCrNi-based medium-entropy alloy with partially recrystallized microstructure and heterogeneous grains10.1016/j.vacuum.2021.110169 ↗
39. Mechanical properties and microstructure evolution of a CrCoNi medium entropy alloy subjected to asymmetric cryorolling and subsequent annealing
40. Effects of tungsten additions on the microstructure and mechanical properties of CoCrNi medium entropy alloys10.1016/j.jallcom.2019.03.235 ↗
41. Heterogeneous banded precipitation of (CoCrNi)93Mo7 medium entropy alloys towards strength–ductility synergy utilizing compositional inhomogeneity10.1016/j.scriptamat.2019.07.026 ↗
42. Precipitation and grain-boundary strengthening of Al-added CoCrNi medium-entropy alloys10.1016/j.matlet.2019.04.129 ↗
43. Towards strength-ductility synergy in a CrCoNi solid solution alloy via nanotwins
44. Gradient nanotwinned CrCoNi me dium-entropy alloy with strength-ductility synergy10.1016/j.scriptamat.2021.114117 ↗
45. Tensile properties and deformation mode of Si-added Fe-18Mn-0.6C steels10.1016/j.actamat.2017.11.023 ↗
46. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
47. Superior strain-hardening by deformation-induced nano-HCP martensite in Fe–Mn–Si–C high-manganese steel10.1016/j.msea.2021.141864 ↗
48. Review on superior strength and enhanced ductility of metallic nanomaterials10.1016/j.pmatsci.2018.02.002 ↗
49. Deformation twinning10.1016/0079-6425(94)00007-7 ↗
50. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
51. Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy10.1016/j.scriptamat.2015.05.041 ↗
52. Superb cryogenic strength of equiatomic CrCoNi derived from gradient hierarchical microstructure10.1016/j.jmst.2018.12.002 ↗
53. Magnetically-driven phase transformation strengthening in high entropy alloys10.1038/s41467-018-03846-0 ↗