journal article·2022-11

Nickel nanoparticles embedded N-doped mesoporous graphitized carbon nanoflake as multifunctional sulfur host for high-performance lithium-sulfur batteries

Hao-Jie Chen, Pai Lu, Rui Guo, Qiang Sun

Publisher page

Abstract

The practical application of lithium-sulfur (Li-S) batteries has long been obstructed by the critical problems of the lithium polysulfides shuttle effect and the intrinsically sluggish sulfur redox kinetics. In this study, nickel nanoparticles were embedded in N-doped mesoporous graphitized carbon nanoflakes (Ni-NMC) through the pyrolysis of polydopamine-coated nickel flakes followed by an acidic etching process. Homogeneous mesopores and highly graphitized carbon are formed by the thermal aggregation and catalytic effect of the nickel nanoparticles during the high-temperature pyrolysis. The nickel nanoparticles remain embedded in the substrate after the acidic etching process due to the protection provided by the carbon layer. The obtained Ni-NMC consists of ca. 3-nm thickness nanoflake, with a high specific surface area of 812.2 m 2 g –1 , a pore volume of 1.59 cm 3 g –1, and a pore size distribution of 6–8 nm. When used as a multifunctional sulfur host, the as-synthesized Ni-NMC, due to its mesoporous and thin-flake architecture, high conductivity, and catalytic effect, is simultaneously able to confine sulfur species within the carbon host and bidirectionally promote the conversion of sulfur to the final lithium sulfide. As a result, a high-performance Li-S battery with a reversible capacity of 869 mA h g –1 at 0.2 C after 100 cycles and a remarkable specific capacity of 705 mA h g –1 at 1.0 C after 200 cycles with a decay rate of 0.05 % per cycle, was realized.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Lithium-sulfur batteries under lean electrolyte conditions: challenges and opportunities10.1002/anie.201909339 ↗
2. Single atom array mimic on ultrathin MOF nanosheets boosts the safety and life of lithium–sulfur batteries10.1002/adma.201906722 ↗
3. Implanting niobium carbide into trichoderma spore carbon: a new advanced host for sulfur cathodes10.1002/adma.201900009 ↗
4. Beyond the polysulfide shuttle and lithium dendrite formation: addressing the sluggish sulfur redox kinetics for practical high-energy Li-S batteries10.1002/anie.202007159 ↗
5. Simple synthesis of Ni/high porosity biomass carbon composites with enhanced electrochemical performance of lithium-sulfur battery
6. Irreversible vs reversible capacity fade of lithium-sulfur batteries during cycling: the effects of precipitation and shuttle10.1149/2.0171801jes ↗
7. Approaching energy-dense and cost-effective lithium–sulfur batteries: From materials chemistry and price considerations10.1016/j.energy.2020.117718 ↗
8. Synthesis of sulfur-co-polymer/porous long carbon nanotubes composite cathode by chemical and physical binding for high performance lithium-sulfur batteries10.1016/j.energy.2020.117034 ↗
9. A 3D conductive network of porous carbon nanoparticles interconnected with carbon nanotubes as the sulfur host for long cycle life lithium–sulfur batteries10.1039/C8NR06109B ↗
10. Layer-by-layer N, P co-doped carbon materials with gradient electric field to suppress the shuttle effect for lithium sulfur batteries10.1016/j.jallcom.2021.159543 ↗
11. Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries10.1016/j.carbon.2018.09.067 ↗
12. Conductive Al-Doped ZnO framework embedded with catalytic nanocages as a multistage-porous sulfur host in lithium−sulfur batteries10.1021/acsami.1c12808 ↗
13. Sulfur-loaded monodisperse carbon nanocapsules anchored on graphene nanosheets as cathodes for high performance lithium–sulfur batteries10.1039/C6TA08557A ↗
14. Effect of zinc-based active sites on porous carbon and electrochemical properties in lithium-sulfur batteries10.1016/j.jallcom.2022.164182 ↗
15. A review of graphene-based catalysts for oxygen reduction reaction10.1016/j.carbon.2020.10.007 ↗
16. Recent progress on the design of hollow carbon spheres to host sulfur in room-temperature sodium–sulfur batteries10.1016/j.carbon.2021.02.026 ↗
17. Nitrogen/sulfur co-doped ordered carbon nanoarrays for superior sulfur hosts in lithium-sulfur batteries10.1016/j.jcis.2019.07.057 ↗
18. Cobalt-doped hierarchical porous carbon materials with spherical chrysanthemum-like structures that are derived from the PVP-assisted synthesis of metal organic frameworks for advanced Li-S batteries10.1016/j.jallcom.2022.165741 ↗
19. Heteroatom dopings and hierarchical pores of graphene for synergistic improvement of lithium–sulfur battery performance10.1039/C8QI00160J ↗
20. Ordered macroporous V-doped ZnO framework impregnated with microporous carbon nanocages as multifunctional sulfur reservoir in lithium-sulfur batteries10.1016/j.cej.2021.134242 ↗
21. Synergistic effect of Co3Fe7 alloy and N-doped hollow carbon spheres with high activity and stability for high-performance lithium-sulfur batteries10.1016/j.nanoen.2021.106111 ↗
22. Cobalt in nitrogen-doped graphene as single-atom catalyst for high-sulfur content lithium-sulfur batteries10.1021/jacs.8b12973 ↗
23. Co-TiO2 nanoparticles anchored in porous carbon matrix as an efficient sulfur host for lithium/sulfur batteries10.1016/j.jallcom.2019.152868 ↗
24. Micro-/mesoporous Co-NC embedded three-dimensional ordered macroporous metal framework as Li-S battery cathode towards effective polysulfide catalysis and retention10.1016/j.jallcom.2021.162327 ↗
25. Designing a highly efficient polysulfide conversion catalyst with paramontroseite for high-performance and long-life lithium-sulfur batteries10.1016/j.nanoen.2018.12.020 ↗
26. Preparation of SnO2@rGO/CNTs/S composite and application for lithium-sulfur battery cathode material10.1016/j.apsusc.2018.08.038 ↗
27. TiO2@Porous carbon nanotubes modified separator as polysulfide barrierfor lithium-sulfur batteries10.1016/j.jallcom.2022.164249 ↗
28. Lithium–sulfur batteries: metallic MoS2 nanoflowers decorated graphene nanosheet catalytically boosts the volumetric capacity and cycle life of lithium–sulfur batteries10.1002/aenm.202003718 ↗
29. Three-dimensionally interconnected Co9S8/MWCNTs composite cathode host for lithium–sulfur batteries10.1016/j.jechem.2019.10.011 ↗
30. A 3D hybrid of chemically coupled nickel sulfide and hollow carbon spheres for high performance lithium–sulfur batteries10.1002/adfm.201702524 ↗
31. Incorporating cobalt nanoparticles in nitrogen-doped mesoporous carbon spheres through composite micelle assembly for high-performance lithium–sulfur batteries10.1021/acsami.1c10227 ↗
32. Precise synthesis of Fe‑N2 sites with high activity and stability for long life lithium-sulfur batteries10.1021/acsnano.0c08056 ↗
33. Ni-doped Ni3S2 nanoflake intertexture grown on graphene oxide as sheet-like anode for high-performance lithium-ion batteries10.1016/j.jallcom.2020.155418 ↗
34. Fibrous hybrid of graphene and sulfur nanocrystals for high-performance lithium–sulfur batteries10.1021/nn401228t ↗
35. Conductive Al-Doped ZnO framework embedded with catalytic nanocages as a multistage-porous sulfur host in lithium−sulfur batteries10.1021/acsami.1c12808 ↗
36. Engineering of hollow core-shell interlinked carbon spheres for highly stable lithium-sulfur batteries10.1021/acsnano.5b03488 ↗
37. Hydroxylated graphene–sulfur nanocomposites for high-rate lithium-sulfur batteries10.1002/aenm.201201080 ↗
38. Structure-related electrochemistry of sulfur-poly(acrylonitrile) composite cathode materials for rechargeable lithium batteries10.1021/cm202467u ↗
39. Metal−sulfur battery cathodes based on PAN-sulfur composites10.1021/jacs.5b08113 ↗
40. Elemental-sulfur-mediated facile synthesis of a covalent triazine framework for high-performance lithium-sulfur batteries10.1002/anie.201511553 ↗
41. Identifying the evolution of selenium-vacancy-modulated MoSe2 precatalyst in lithium-sulfur chemistry10.1002/anie.202109291 ↗
42. CoSn Alloy-based three-dimensional ordered multistage porous composite towards effective polysulfide confinement and catalytic conversion in lithium-sulfur batteries10.1016/j.electacta.2021.139644 ↗