The hot corrosion behaviors and mechanisms of hot-dipped Ti-Al-Si coatings on TiBw/Ti6Al4V composite against NaCl and Na2SO4
Source abstract
Abstract
The Ti-Al-Si coatings were prepared on TiBw/Ti6Al4V composites by a two-step method comprising hot dip and heat treatment processes to enhance the hot corrosion resistance. Results show that Ti-Al-3Si (wt%) and Ti-Al-20Si (wt%) coatings were mainly composed of the Ti(Al,Si) 3 and Ti 3AlSi 5 phase, respectively. Both of the coatings can protect the substrate against the deposited NaCl, 25 wt%NaCl+ 75 wt%Na 2SO 4, and Na 2SO 4 salts. In particular, the coatings exhibited superior hot corrosion resistance in the deposited Na 2SO 4 salts, which is attributed to the formation of dense and continuous Al 2O 3 oxide scales and the slow dissolution process of sulfate during the hot corrosion process. Moreover, the Ti-Al-Si coatings exhibited serious external oxidation when hot corroded in the deposited 25 wt% NaCl+ 75 wt%Na 2SO 4 and Na 2SO 4 salts, in which more corrosion products and pores were formed due to the autocatalytic reaction processes. Since the deposited NaCl salt would rapidly dissolve the oxide scale and destroy its compactness and continuity, which presented a more serious hot corrosion effect.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · Metal and Thin Film Mechanics · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Multiscale architecture and superior high-temperature performance of discontinuously reinforced titanium matrix composites10.1002/adma.202000688 ↗
2. Titanium metal matrix composites: an overview10.1016/j.compositesa.2019.04.005 ↗
3. Microstructurally inhomogeneous composites: is a homogeneous reinforcement distribution optimal?10.1016/j.pmatsci.2015.01.002 ↗
4. A study on the hot corrosion behavior of Ti-6Al-4V alloy10.1016/j.matlet.2006.07.058 ↗
5. Hot corrosion behaviour of Ti-6Al-4V modified by ultrasonic shot peening10.1016/j.matdes.2016.07.133 ↗
6. Hot corrosion of Ti-46Al-8Ta (at%) intermetallic alloy10.1016/j.corsci.2013.08.032 ↗
7. Hot corrosion behaviour of (γ+α2)-Ti-46Al-8Nb (at%) and α-Ti-6Al-1Mn (at%) alloys10.1016/j.corsci.2016.11.006 ↗
8. Hot corrosion behavior of a Si-Y co-deposition coating on a Ti2AlNb based alloy in NaCl-Na2SO4 mixture10.1016/j.surfcoat.2021.127282 ↗
9. Protective TixSiy coatings for enhanced oxidation resistance of the ɣ-TiAl alloy at 900 °C10.1016/j.surfcoat.2021.127963 ↗
10. Behaviour of a silicon-rich coating on Ti-46Al-8Ta (at%) in hot-corrosion environments10.1016/j.corsci.2017.02.002 ↗
11. Effect of Al2O3 and enamel coatings on 900°C oxidation and hot corrosion behaviors of gamma-TiAl10.1016/S0921-5093(99)00513-4 ↗
12. Effect of a sputtered TiAlCr coating on hot corrosion resistance of gamma-TiAl10.1016/S0966-9795(99)00044-8 ↗
13. Effect of enamel coating on oxidation and hot corrosion behaviors of Ti-24Al-14Nb-3V alloy10.1361/105994906X136151 ↗
14. Improvement hot corrosion resistance of aluminized TiAl alloy by anodization and pre-oxidation10.1016/S1003-6326(20)65487-5 ↗
15. Hot corrosion behavior of SiO2-Al2O3-Glass composite coating on Ti-47Al-2Cr-2Nb alloy: diffusion barrier for S and Cl10.1007/s40195-018-0842-1 ↗
16. Corrosion resistance and interfacial morphologies of a high Nb-containing TiAl alloy with and without thermal barrier coatings in molten salts10.1016/j.corsci.2019.05.011 ↗
17. Oxidation resistance and corrosion behavior of hot-dip aluminized coatings on commercial-purity titanium10.1016/j.surfcoat.2011.08.042 ↗
18. Effect of hot-dip aluminizing on the oxidation resistance of Ti-6Al-4V alloy at high temperatures10.1016/j.corsci.2011.10.029 ↗
19. Oxidation behavior and microstructural evolution of hot-dipped aluminum coating on Ti-6Al-4V alloy at 800°C10.1016/j.surfcoat.2013.09.023 ↗
20. Oxidation behaviour of the nickel-based superalloy DZ125 hot-dipped with Al coatings doped by Si10.1016/j.corsci.2016.07.020 ↗
21. Improvement of oxidation resistance of TiAl6V4 alloy by siliconizing from liquid phase using melts with high silicon content10.1016/j.jallcom.2011.02.068 ↗
22. Synthesis of Ti–Si–Al coatings on the surface of Ti–6Al–4V alloy via hot dip siliconizing route10.1016/j.surfcoat.2018.01.037 ↗
23. Microstructure and super oxidation resistance of the network structured Ti-Al-Si coating10.1016/j.jallcom.2019.151679 ↗
24. Microstructure evolution and oxidation resistance of silicon-aluminizing coating on γ-TiAl alloy10.1016/j.apsusc.2015.08.204 ↗
25. On the liquid/solid phase equilibria in the Al-rich corner of the Al-Si-Ti ternary system10.1007/s11669-014-0282-1 ↗
26. Microstructure and high temperature oxidation behavior of Ti-Al-Nb-Si coatings on Ti-6Al-4V alloy10.1016/j.jallcom.2018.06.238 ↗
27. Revealing anti-oxidation mechanisms of titanium composite materials by detailed characterization of scale phase constitutions10.1016/j.corsci.2021.109845 ↗
28. Hot corrosion behaviour of Ti-Al based intermetallics10.1016/S0167-577X(02)00882-0 ↗
29. behavior of TiAl-base intermetallics in molten salts10.1023/A:1018818622547 ↗
30. Hot corrosion phenomena of Nb-Ti-Si based alloy and its silicide coating induced by different corrosive environments at 900℃10.1016/j.ceramint.2018.01.238 ↗
31. Influence of the combined-effect of NaCl and Na2SO4 on the hot corrosion behaviour of aluminide coating on Ni-based alloys10.1016/j.jallcom.2019.03.165 ↗
32. Preparation and hot corrosion behaviour of Pt modified AlSiY coating on a Ni-based superalloy10.1016/j.corsci.2015.12.007 ↗
33. Improved hot corrosion resistance of Dy-Co-modified aluminide coating by pack cementation process on nickel base superalloys10.1016/j.corsci.2016.09.011 ↗
34. Hot corrosion behaviour of Nbss/Nb5Si3 in situ composites in the mixture of Na2SO4 and nacl melts10.1016/j.corsci.2013.04.057 ↗
35. Hot corrosion behavior of silicide coating on an Nb-Ti-Si based ultrahigh temperature alloy10.1016/j.corsci.2014.10.053 ↗
36. Effect of nanocrystallization on hot corrosion resistance of Ti-48Al-8Cr-2Ag alloy in molten salts10.1016/S1003-6326(06)60089-7 ↗