High-stable power generation from low concentration ethanol by catalyst layer modified solid oxide fuel cells
Source abstract
Abstract
Power generation from ethanol by solid oxide fuel cells (SOFCs) can be a clean and green way to utilize renewable fuel. In this study, the performance of the reduced La 0.4Sr 0.6Co 0.2Fe 0.7Nb 0.1O 3-δ (LSCFN) with anchored Co-Fe nanoparticles is investigated as the electrode in low concentration ethanol for the first time. The cell with the LSCFN as the symmetrical electrodes demonstrates considerable peak power density (0.32 W cm −2 ) and excellent durability (160 h) at 800 ℃. Moreover, the reduced LSCFN is further applied as a catalyst layer to prevent the Ni‐YSZ anode-supported cell from coking in ethanol fuel. Interestingly, both cells modified with or without this LSCFN layer demonstrate similar output performance in H 2. While in ethanol, the catalyst layer modified cell exhibits better coking resistance and stability than the conventional cell, showing 0.97 W cm −2 at 800 ℃, as well as excellent durability for 210 h. The results suggest that combining the Ni-YSZ anode-supported cells with the excellent carbon tolerance of the LSCFN can clean and stable directly generate power from ethanol.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Solid oxide fuel cell (SOFC) performance evaluation, fault diagnosis and health control: a review10.1016/j.jpowsour.2021.230058 ↗
2. A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels10.1016/j.enconman.2021.115175 ↗
3. A novel Boudouard reaction catalyst derived from strontium slag for enhanced performance of direct carbon solid oxide fuel cells10.1016/j.jallcom.2021.162643 ↗
4. Thermo-electrochemical modelling of high temperature methanol-fuelled solid oxide fuel cells10.1016/j.apenergy.2021.116832 ↗
5. Tri-doped ceria (M0.2Ce0.8O2-δ, M= Sm0.1, Ca0.05, Gd0.05) electrolyte for hydrogen and ethanol-based fuel cells10.1016/j.jallcom.2018.09.201 ↗
6. Synthesis of Co-Ni and Cu-Ni based-catalysts for dry reforming of methane as potential components for SOFC anodes10.1016/j.ceramint.2021.08.220 ↗
7. Understanding hydrogen sulfide impact on a portable, commercial, propane-powered solid-oxide fuel cell10.1016/j.apenergy.2021.118163 ↗
8. Preparation and evaluation of Ni-based anodes with straight open pores for solid oxide fuel cells10.1016/j.jallcom.2019.153244 ↗
9. A multiscale-architecture solid oxide fuel cell fabricated by electrophoretic deposition technique10.1016/j.jallcom.2020.154654 ↗
10. Anodic properties of Ni-Fe bimetallic nanofiber for solid oxide fuel cell using LaGaO3 electrolyte10.1016/j.jallcom.2021.159911 ↗
11. Progress in Ni-based anode materials for direct hydrocarbon solid oxide fuel cells10.1007/s10853-018-2205-8 ↗
12. Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels10.1021/cr300491e ↗
13. Development of nickel based cermet anode materials in solid oxide fuel cells-Now and future
14. Electrochemical characteristics and carbon tolerance of solid oxide fuel cells with direct internal dry reforming of methane10.1016/j.apenergy.2018.06.114 ↗
15. Composite electrodes of Ti-doped SrFeO3-δ and LSGMZ electrolytes as both the anode and cathode in symmetric solid oxide fuel cells10.1016/j.jallcom.2020.156154 ↗
16. Recent advances in the development of anode materials for solid oxide fuel cells utilizing liquid oxygenated hydrocarbon fuels: a mini review10.1002/ente.201700738 ↗
17. Enhance coking tolerance of high-performance direct carbon dioxide-methane solid oxide fuel cells with an additional internal reforming catalyst10.1016/j.jpowsour.2021.230533 ↗
18. Clean and stable conversion of oxygen-bearing low-concentration coal mine gas by solid oxide fuel cells with an additional reforming layer10.1016/j.jpowsour.2021.230208 ↗
19. Enhancing the partial oxidation of gasoline with Mo-doped Ni catalysts for SOFC applications: an integrated experimental and DFT study10.1016/j.apcatb.2020.118626 ↗
20. High-performance direct carbon dioxide-methane solid oxide fuel cell with a structure-engineered double-layer anode10.1016/j.jpowsour.2020.229199 ↗
21. A review on anode on-cell catalyst reforming layer for direct methane solid oxide fuel cells10.1016/j.ijhydene.2021.05.040 ↗
22. Progress report on the catalyst layers for hydrocarbon-fueled SOFCs10.1016/j.ijhydene.2021.09.198 ↗
23. Use of a catalyst layer for anode-supported SOFCs running on ethanol fuel10.1016/j.jpowsour.2007.11.054 ↗
24. In situ fabrication of (Sr,La)FeO4 with CoFe alloy nanoparticles as an independent catalyst layer for direct methane-based solid oxide fuel cells with a nickel cermet anode10.1039/C6TA04639H ↗
25. Enhanced coking resistance of a Ni cermet anode by a chromates protective layer10.1016/j.jechem.2018.12.007 ↗
26. NiMo-ceria-zirconia catalytic reforming layer for solid oxide fuel cells running on a gasoline surrogate10.1016/j.apcatb.2017.10.067 ↗
27. Utilization of low-concentration coal-bed gas to generate power using a core-shell catalyst-modified solid oxide fuel cell10.1016/j.renene.2019.09.023 ↗
28. Enhanced coking resistance of Ni cermet anodes for solid oxide fuel cells based on methane on‐cell reforming by a redox‐stable double‐perovskite Sr2MoFeO6–δ10.1002/er.4106 ↗
29. Performance evaluation of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ as both anode and cathode material in solid oxide fuel cells10.1016/j.ijhydene.2014.01.009 ↗
30. Stability investigation for symmetric solid oxide fuel cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ electrode10.1149/2.0551507jes ↗
31. Co-synthesis of LSCFN-GDC electrode for symmetric solid oxide fuel cell running on propane10.1016/j.electacta.2017.12.096 ↗
32. Electrochemical reduction of CO2 in a symmetrical solid oxide electrolysis cell with La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ electrode10.1016/j.jcou.2019.07.021 ↗
33. Co-electrolysis of H2O-CO2 in a solid oxide electrolysis cell with symmetrical La0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ electrode10.1016/j.jelechem.2019.01.064 ↗
34. An in situ formed MnO-Co composite catalyst layer over Ni-Ce0.8Sm0.2O2−x anodes for direct methane solid oxide fuel cells10.1039/C6TA10473H ↗
35. In situ investigation of reversible exsolution/dissolution of CoFe alloy nanoparticles in a Co-doped Sr2Fe1.5Mo0.5O6-δ cathode for CO2 electrolysis10.1002/adma.201906193 ↗
36. In situ fabrication of CoFe alloy nanoparticles structured (Pr0.4Sr0.6)3(Fe0.85Nb0.15)2O7 ceramic anode for direct hydrocarbon solid oxide fuel cells10.1016/j.nanoen.2014.12.001 ↗
37. Highly efficient CO2 electrolysis to CO on Ruddlesden-Popper perovskite oxide with in situ exsolved Fe nanoparticles10.1039/D0TA11328J ↗
38. Improving the performance of Pr0.4Sr0.6Co0.2Fe0.7Nb0.1O3-δ-based single-component fuel cell and reversible single-component cells by manufacturing A-site deficiency10.1016/j.renene.2021.05.141 ↗
39. Ruddlesden-popper oxide (La0.6Sr0.4)2(Co,Fe)O4 with exsolved CoFe nanoparticles for a solid oxide fuel cell anode catalyst10.1002/ente.202100116 ↗
40. Atomic-scale insight into exsolution of CoFe alloy nanoparticles in La0.4Sr0.6Co0.2Fe0.7Mo0.1O3-δ with efficient CO2 electrolysis10.1002/anie.202006536 ↗
41. Efficient water splitting through solid oxide electrolysis cells with a new hydrogen electrode derived from A-site cation-deficient La0.4Sr0.55Co0.2Fe0.6Nb0.2O3-δ perovskite
42. Nanostructured palladium-La0.75Sr0.25Cr0.5Mn0.5O3/Y2O3-ZrO2 composite anodes for direct methane and ethanol solid oxide fuel cells10.1016/j.jpowsour.2008.06.099 ↗
43. A fuel-flexible solid oxide fuel cell operating in gradual internal reforming10.1149/2.107403jes ↗
44. Direct ethanol solid oxide fuel cell operating in gradual internal reforming10.1016/j.jpowsour.2012.03.104 ↗
45. Use of anode barrier layers in tubular solid-oxide fuel cells for robust operation on hydrocarbon fuels10.1016/j.jpowsour.2012.01.035 ↗
46. Application of a NiMo-Ce0.5Zr0.5O2-δ catalyst for solid oxide fuel cells running on gasoline10.1016/j.jpowsour.2019.226732 ↗
47. Improving the stability of direct-methane solid oxide fuel cells using anode barrier layers10.1016/j.jpowsour.2005.09.060 ↗
48. Anode barrier layers for tubular solid-oxide fuel cells with methane fuel streams10.1016/j.jpowsour.2006.04.101 ↗
49. Direct power generation from low concentration coal-bed gas by a catalyst-modified solid oxide fuel cell10.1002/celc.201800254 ↗
50. Improvement of solid oxide fuel cell performance by a core‐shell structured catalyst using low concentration coal bed methane fuel10.1002/er.5301 ↗
51. Direct electrochemical oxidation of ethanol on SOFCs: improved carbon tolerance of Ni anode by alloying10.1016/j.apcatb.2015.11.002 ↗
52. Improvement of multi-layer anode for direct ethanol solid oxide fuel cells10.1016/j.elecom.2009.02.003 ↗
53. Nickel-based anode with water storage capability to mitigate carbon deposition for direct ethanol solid oxide fuel cells10.1002/cssc.201301341 ↗
54. Improvement of Cu-CeO2 anodes for SOFCs running on ethanol fuels10.1016/j.ssi.2008.11.010 ↗
55. Preparation and performance characterization of the Fe-Ni/ScSZ cermet anode for oxidation of ethanol fuel in SOFCs10.1016/j.jpowsour.2007.02.075 ↗
56. Direct utilization of ethanol on ceria-based anodes for solid oxide fuel cell10.1002/apj.182 ↗
57. Direct utilization of methanol and ethanol in solid oxide fuel cells using Cu-Co(Ru)/Zr0.35Ce0.65O2-δ anodes10.1016/j.jpowsour.2009.12.122 ↗
58. Development of a Ni-Ce0.8Zr0.2O2 catalyst for solid oxide fuel cells operating on ethanol through internal reforming10.1016/j.jpowsour.2011.03.018 ↗
59. A comprehensive evaluation of a Ni-Al2O3 catalyst as a functional layer of solid-oxide fuel cell anode10.1016/j.jpowsour.2009.07.053 ↗
60. Application of a Cu-CeO2/Ni-yttria-stabilized zirconia multi-layer anode for anode-supported solid oxide fuel cells operating on H2-CO syngas fuels10.1016/j.jpowsour.2010.09.053 ↗
61. Operation of ceria-electrolyte solid oxide fuel cells on iso-octane-air fuel mixtures10.1016/j.jpowsour.2005.08.008 ↗
62. Solid oxide fuel cells fed with dry ethanol: the effect of a perovskite protective anodic layer containing dispersed Ni-alloy @ FeOx core-shell nanoparticles10.1016/j.apcatb.2017.08.010 ↗