Titanium and fluorine co-modification strengthens high-voltage electrochemical performance of LiCoO2
Source abstract
Abstract
The cathode material for lithium-ion batteries, LiCoO 2 (LCO), is suffered from the structural damage and rapid performance degradation at high voltage. In this article, a hydrolysis-calcination method was explored to modify the single-crystal LCO particles with Ti&F co-modification, aiming at strengthening the structural stability through decreasing the energy barrier of lithium ion diffusion. Evaluated at high voltage (3.0–4.55 V), the optimal sample LCO-TF2 has the initial discharge capacity of 199.3 mAh g −1 and capacity retention rate of 75% after 100 cycles at 1 C and 45 °C, significantly higher than that of the pristine sample (192.8 mAh g −1 and 35%). Characterized by XRD, TEM, XPS, etc., it is illustrated that the Ti&F co-modified sample LCO-TF2 has the rock-salt phase on its surface besides the layered structure inside. GITT results indicate that Li + diffusion coefficients of LCO-TF2 are more than twice times of those of LCO under the voltage range of 4.0–4.55 V. The in-situ XRD tests reflect that during the charge-discharge cycle the crystal structure variation of LCO-TF2 is suppressed during Li + extraction and insertion. Further, DFT calculations disclose that with the co-modification of Ti and F the surface film of LiCoO 2 possesses lower energy barrier of Li-ion diffusion. These results would provide useful guidance on improving electrochemical performance of LiCoO 2 at high cut-off voltage.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Challenges for rechargeable batteries10.1016/j.jpowsour.2010.11.074 ↗
2. Study on the effect of Ni and Mn doping on the structural evolution of LiCoO2 under 4.6 V high-voltage cycling10.1016/j.jallcom.2020.155827 ↗
3. A review of lithium-ion battery safety concerns: the issues, strategies, and testing standards10.1016/j.jechem.2020.10.017 ↗
4. A review: Modification strategies of nickel-rich layer structure cathode (Ni ≥ 0.8) materials for lithium ion power batteries10.1016/j.jechem.2021.01.044 ↗
5. LixCoO2 (0<x≤1): a new cathode material for batteries of high energy density10.1016/0167-2738(81)90077-1 ↗
6. Bifunctional self-stabilized strategy enabling 4.6 V LiCoO2 with excellent long-term cyclability and high-rate capability
7. Methods to obtain excellent capacity retention in LiCoO2 cycled to 4.5 V10.1016/j.electacta.2003.10.019 ↗
8. Delayed phase transition and improved cycling/thermal stability by spinel LiNi0.5Mn1.5O4 Modification for LiCoO2 cathode at high voltages10.1021/acsami.0c02459 ↗
9. Surface-protected LiCoO2 with ultrathin solid oxide electrolyte film for high-voltage lithium ion batteries and lithium polymer batteries10.1016/j.jpowsour.2018.03.076 ↗
10. Evolution of the morphology, structural and thermal stability of LiCoO2 during overcharge10.1016/j.jechem.2020.06.071 ↗
11. Self-assembly of core-shell structures driven by low doping limit of Ti in LiCoO2: first-principles thermodynamic and experimental investigation10.1039/C6CP08114B ↗
12. Realization of Ti doping by electrostatic assembly to improve the stability of LiCoO2 cycled to 4.5 V10.1149/2.0421910jes ↗
13. Synthesis and characterization of Mg substituted LiCoO210.1149/1.3424909 ↗
14. Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping10.1038/s41560-018-0180-6 ↗
15. X-ray diffraction, 57Fe Mössbauer and step potential electrochemical spectroscopy study of LiFeyCo1−yO2 compounds10.1016/S0378-7753(99)00213-X ↗
16. Zero-strain intercalation cathode for rechargeable Li-ion10.1002/1521-3773(20010917)40:18<3367::AID-ANIE3367>3.0.CO;2-A ↗
17. Study of electrochemical properties of coating ZrO2 on LiCoO210.1016/j.jallcom.2010.02.091 ↗
18. Sputtering TiO2 on LiCoO2 composite electrodes as a simple and effective coating to enhance high-voltage cathode performance10.1016/j.jpowsour.2017.02.035 ↗
19. Halogen-doping in LiCoO2 cathode materials for Li-ion batteries: insights from ab initio calculations10.1039/C5RA21258H ↗
20. Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries10.1038/s41467-018-07296-6 ↗
21. A facile method to synthesize nitrogen and fluorine co-doped TiO2 nanoparticles by pyrolysis of (NH4)2TiF610.1007/s11051-008-9383-2 ↗
22. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
23. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
24. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
25. First-principles calculations of the electronic structure and spectra of strongly correlated systems: the LDA+U method
26. Calculations of oxygen stability in lithium-rich layered cathodes10.1021/jp3058788 ↗
27. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
28. Synergistically enhanced electrochemical performance of Ni-rich cathode materials for lithium-ion batteries by K and Ti Co-modification10.1021/acs.jpcc.9b10526 ↗
29. Achieving stable cycling of LiCoO2 at 4.6 V by multilayer surface modification
30. A facile method to synthesize nitrogen and fluorine co-doped TiO2 nanoparticles by pyrolysis of (NH4)2TiF610.1007/s11051-008-9383-2 ↗
31. Fabrication of chain-like TiO2 hollow microspheres with enhanced photocatalytic activity10.1016/j.ceramint.2015.02.134 ↗
32. Effect of seed crystal and composition of solution on the formation of TiO2 thin film from aqueous solution10.1016/S0040-6090(02)00783-6 ↗
33. Reaction and characterization of Co and Ce Doped Mn/TiO2 Catalysts for Low-Temperature SCR of NO with NH310.1007/s10562-015-1556-x ↗
34. Alternating misfit layered transition/alkaline earth metal chalcogenide Ca3Co4O9 as a new class of chalcogenide materials for hydrogen evolution10.1021/cm501181j ↗
35. Regulating surface and grain-boundary structures of Ni-Rich layered cathodes for ultrahigh cycle stability10.1002/smll.201906433 ↗
36. Al-Ti-oxide coated LiCoO2 cathode material with enhanced electrochemical performance at a high cutoff charge potential of 4.5 V10.1016/j.jallcom.2019.05.165 ↗
37. Enhanced rate capability and low-temperature performance of Li4Ti5O12 anode material by facile surface fluorination10.1021/acsami.7b03489 ↗
38. Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6 V10.1038/s41560-019-0409-z ↗
39. Hybrid TiO2-ZnO nanomaterials prepared using laser ablation in liquid10.3390/ma13030719 ↗
40. Synergistic effect of F(-) doping and LiF coating on improving the high-voltage cycling stability and rate capacity of LiNi0.5Co0.2Mn0.3O2 cathode materials for lithium-ion batteries10.1021/acsami.8b10016 ↗
41. Ab initio study of doping effects on LiMnO2 and Li2MnO3 cathode materials for Li-ion batteries10.1039/C5TA01445J ↗