Rational design of graphene oxide wrapped porous microspheres as high-performance sulfur cathode in lithium-sulfur batteries
Source abstract
Abstract
The application of lithium-sulfur batteries (LSBs) encounters many problems including polysulfides shuttling, low sulfur conductivity and poor stability. To address these issues, a porous microsphere-based sulfur cathode, consists of Mg 2+ etched ZIF-67 and carbon nanotubes encapsulated with graphene oxide (Mg ZIF-67/CNT@GO), was fabricated. The introduction of CNTs endows the composite with good electrical conductivity, and at the same time the loss of polysulfides is mitigated through its unique porous structure. Moreover, the Mg 2+ etched ZIF-67 also provides a large area of active interface, which promotes its trapping with polysulfides and catalytic performance towards polysulfides conversion. Accordingly, the sulfur cathode with Mg ZIF-67/CNT@GO composite delivers good electrochemical performance. The battery exhibits a high capacity retention rate of 87.4% and an areal capacity of 3.35 mAh cm -2 under 3.0 mg cm -2 sulfur loading at 0.2 C. In addition, the pouch cell cycled at 0.1 C retains its high capacity of 640.8 mAh g -l after 50 cycles. This work provides a promising sulfur cathode design approach for the implementation of LSBs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. A review of size engineering-enabled electrocatalysts for Li-S chemistry10.1039/D1NA00522G ↗
2. Recent advances in cathode materials for rechargeable lithium-sulfur batteries10.1039/C9NR04415A ↗
3. Challenges and prospects of lithium-sulfur batteries10.1021/ar300179v ↗
4. Rational design of MOF-based materials for next-generation rechargeable batteries10.1007/s40820-021-00726-z ↗
5. 3D MXene architectures as sulfur hosts for high-performance lithium-sulfur batteries10.1016/j.jechem.2021.08.040 ↗
6. Electrocatalytic polysulfide transformation for suppressing the shuttle effect of Li-S batteries10.1016/j.apsusc.2020.146970 ↗
7. Clean utilization of palm kernel shell: sustainable and naturally heteroatom-doped porous activated carbon for lithium–sulfur batteries10.1007/s12598-020-01439-9 ↗
8. Yolk-shell structure MnO2@Hollow carbon nanospheres as sulfur host with synergistic encapsulation of polysulfides for improved Li-S batteries10.1016/j.jallcom.2020.155790 ↗
9. Research progress in graphene as sulfur hosts in lithium-sulfur batteries
10. Nano storage-boxes constructed by the vertical growth of MoS2 on graphene for high-performance Li-S batteries10.1016/j.jechem.2021.06.035 ↗
11. Direct insight into sulfiphilicity-lithiophilicity design of bifunctional heteroatom-doped graphene mediator toward durable Li-S batteries10.1016/j.jechem.2021.08.048 ↗
12. 2D materials for inhibiting the shuttle effect in advanced lithium-sulfur batteries10.1002/cssc.201901981 ↗
13. Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries10.1002/anie.201100637 ↗
14. Sulfonated polyaniline coated bamboo-derived biochar/sulfur cathode for Li-S batteries with excellent dual conductivity and polysulfides affinity10.1016/j.electacta.2019.04.067 ↗
15. Hierarchical porous carbon with nano-MgO as efficient Sulfur species micro-reactors for lithium-sulfur battery10.1149/1945-7111/abed2a ↗
16. One-step synthesized CoNi-embedded N-doped carbon nanotubes as sulfur host to synergistically immobilize the discharge products in lithium-sulfur batteries10.1016/j.jallcom.2021.159952 ↗
17. Promoting kinetics of polysulfides redox reactions by the multifunctional CoS/C/CNT microspheres for high-performance lithium-sulfur batteries10.1016/j.apsusc.2019.144463 ↗
18. Synthesis of CoO nanocrystals decorated porous carbon nanotube microspheres as sulfur host for high performance Li/S batteries
19. The application of metal-organic frameworks in electrode materials for lithium-ion and lithium-sulfur batteries
20. A review of rechargeable batteries for portable electronic devices10.1002/inf2.12000 ↗
21. Mechanistic understanding of the role separators playing in advanced lithium‐sulfur batteries10.1002/inf2.12097 ↗
22. Enabling an intrinsically safe and high‐energy‐density 4.5 V‐class Li‐ion battery with nonflammable electrolyte10.1002/inf2.12089 ↗
23. Enhanced catalytic conversion of polysulfides using bimetallic Co7Fe3 for high-performance lithium-sulfur batteries10.1021/acsnano.0c04054 ↗
24. Lewis acid-base interactions between polysulfides and metal organic framework in lithium sulfur batteries10.1021/nl404721h ↗
25. Insights to perfluorooctanoic acid adsorption micro-mechanism over Fe-based metal organic frameworks: Combining computational calculation with response surface methodology10.1016/j.jhazmat.2020.122686 ↗
26. Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets10.1021/cr200434v ↗
27. Fabrication of hollow LDH nanocages using ZIF-67 template as superb adsorbent for anionic organic pollutant10.1007/s10934-020-01007-7 ↗
28. Synthesis of glutamate intercalated Mg-Al layered double hydroxides: influence of stirring and aging time
29. From metal-organic framework to Li2S@C-Co-N nanoporous architecture: a high-capacity cathode for lithium-sulfur batteries10.1021/acsnano.6b05696 ↗
30. Survey and research process on electrode materials of lithium-sulfur batteries
31. Tellurium-impregnated porous cobalt-doped carbon polyhedra as superior cathodes for lithium-tellurium batteries10.1021/acsnano.7b03057 ↗
32. A hierarchically porous ZIF@LDH core-shell structure for high-performance supercapacitors10.1002/asia.202100087 ↗
33. Graphene-encapsulated blackberry-like porous silicon nanospheres prepared by modest magnesiothermic reduction for high-performance lithium-ion battery anode10.1007/s12598-020-01528-9 ↗
34. MOF-derived Co/CoO particles prepared by low temperature reduction for microwave absorption10.1016/j.cej.2020.128378 ↗
35. Vertically rooting multifunctional tentacles on carbon scaffold as efficient polysulfide barrier toward superior lithium-sulfur batteries10.1016/j.nanoen.2019.103905 ↗
36. CNT-assembled dodecahedra core@nickel hydroxide nanosheet shell enabled sulfur cathode for high-performance lithium-sulfur batteries10.1016/j.nanoen.2018.10.061 ↗
37. Characterization of X-ray irradiated graphene oxide coatings using X-ray diffraction, X-ray photoelectron spectroscopy, and atomic force microscopy10.1017/S0885715613000109 ↗
38. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
39. Porous three-dimensional reduced graphene oxide for high-performance lithium-sulfur batteries10.1016/j.jallcom.2017.12.294 ↗
40. Improved photocatalytic activity of Ni2P/NiCo-LDH composites via a Co-P bond charge transfer channel to degrade tetracycline under visible light10.1016/j.jallcom.2020.158039 ↗
41. Free-standing integrated cathode derived from 3D graphene/carbon nanotube aerogels serving as binder-free sulfur host and interlayer for ultrahigh volumetric-energy-density lithium sulfur batteries10.1016/j.nanoen.2019.04.006 ↗
42. Enhancing catalytic activity of titanium oxide in lithium-sulfur batteries by band engineering10.1002/aenm.201900953 ↗
43. Rational design of porous N-Ti3C2 MXene@CNT microspheres for high cycling stability in Li-S Battery10.1007/s40820-019-0341-6 ↗
44. Quasi-solid-state dual-ion sodium metal batteries for low-cost energy storage10.1016/j.chempr.2020.01.008 ↗
45. Electrospinning-based strategies for battery materials
46. Functionalized N-doped hollow graphitic carbon-nanotube/carbon-nanosphere composite10.1016/j.coco.2020.100578 ↗
47. Electrochemical behavior study of flower-shaped bimetal organic frameworks with graphene oxide for cathode of lithium sulfur batteries10.1166/jnn.2020.17833 ↗
48. Electrochemical characterization of nano-structured graphene oxide/CNT Electrodes containing sulfur for lithium rechargeable cells10.1166/jnn.2016.12888 ↗
49. Facile synthesis of graphene oxide@mesoporous carbon hybrid nanocomposites for lithium sulfur battery10.1016/j.electacta.2014.02.043 ↗
50. 3D, mutually embedded MOF@carbon nanotube hybrid networks for high-performance lithium-sulfur batteries10.1002/aenm.201803793 ↗