journal article·2022-03

Spatial composition distribution of a Ni-Cu binary alloy powder in a thermal plasma process

Y. Hirayama, M. Shigeta, K. Takagi, K. Ozaki

Publisher page

Abstract

The composition of nanoparticles obtained by a thermal plasma process was quantitatively investigated using a Ni-Cu isomorphous alloy system. Specifically, a Ni-Cu alloy nanopowder with an average particle diameter of ~ 70 nm was prepared by the thermal plasma process and the particle composition was investigated. As the lattice constant follows the Vegard`s law, a nanopowder with an average composition equivalent to the predefined composition was successfully obtained. According to the EDS analysis obtained from each particle, the standard deviation of composition distribution was 7.7 at% as a powder. The computational study indicated that each particle has a homogeneous composition because of the nanoparticle formation via nanodroplet and that a composition distribution of 1.05 at% is estimated in the powder. Further, the spatial composition distribution of the alloy powder in the reaction chamber was experimentally studied by trapping the powder at a certain location, and the results indicated that the composition distribution of the powder varied spatially.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · High-Temperature Coating Behaviors · Theoretical and Computational Physics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. NiCu nanoparticles for catalytic hydrogenation of biomass-derived carbonyl compounds10.1021/acsanm.0c01857 ↗
2. Tuning of trifunctional NiCu bimetallic nanoparticles confined in a porous carbon network with surface composition and local structural distortions for the electrocatalytic oxygen reduction, oxygen and hydrogen evolution reactions10.1021/jacs.0c06960 ↗
3. Nanoparticles for electronic device applications: a brief review10.1252/jcej.38.535 ↗
4. Mechanical properties of nanomaterials: a review10.1515/ntrev-2020-0021 ↗
5. The potential biomedical application of NiCu magnetic nanoparticles10.3390/magnetochemistry5040066 ↗
6. Cu–Ni materials prepared by mechanical milling: their properties and electrocatalytic activity towards nitrate reduction in alkaline medium10.1016/j.jallcom.2006.06.023 ↗
7. Synthesis and characterization of bimetallic Ni–Cu particles10.1016/S0022-4596(02)00163-9 ↗
8. Synthesis of copper–nickel nanoparticles prepared by mechanical milling for use in magnetic hyperthermia10.1016/j.jmmm.2011.04.004 ↗
9. Double template electrochemical deposition and characterization of NiCo and NiCu alloys nanoparticles and nanofilms10.1007/s10008-007-0332-2 ↗
10. Synthesis of NiCu alloy nanoparticles by arc plasma evaporation10.4028/www.scientific.net/AMR.710.157 ↗
11. Time-dependent 3D simulation of an argon RF inductively coupled thermal plasma10.1088/0963-0252/21/5/055029 ↗
12. Three-dimensional flow dynamics of an argon RF plasma with dc jet assistance: a numerical study
13. Homogeneous nucleation of particles from the vapor phase in thermal plasma synthesis10.1007/BF01083672 ↗
14. Numerical investigation for nano-particle synthesis in an RF inductively coupled plasma10.1016/j.tsf.2003.12.020 ↗
15. Computational study of quenching effects on growth processes and size distributions of silicon nanoparticles at a thermal plasma tail10.3390/nano11061370 ↗
16. Thermal plasmas for nanofabrication10.1088/0022-3727/44/17/174025 ↗
17. Preparation of Nano Aluminium Powder (NAP) using a thermal plasma: process development and characterization10.22211/cejem/64964 ↗
18. Cold welding behavior of fine bare aluminum powders prepared by new low oxygen induction thermal plasma system10.1016/j.jallcom.2018.07.275 ↗
19. Evaluation of compositional homogeneity of Fe-Co alloy nanoparticles prepared by thermal plasma synthesis10.1016/j.jallcom.2019.04.083 ↗
20. Anisotropic Nd-Fe ultrafine particles with stable and metastable phases prepared by induction thermal plasma10.1016/j.jallcom.2021.159724 ↗
21. Effect of saturation pressure difference on metal–silicide nanopowder formation in thermal plasma fabrication10.3390/nano6030043 ↗
22. Growth mechanism of silicon-based functional nanoparticles fabricated by inductively coupled thermal plasmas10.1088/0022-3727/40/8/S20 ↗
23. Growth model of binary alloy nanopowders for thermal plasma synthesis10.1063/1.3464228 ↗
24. Two-directional nodal model for co-condensation growth of multicomponent nanoparticles in thermal plasma processing10.1007/s11666-009-9316-3 ↗
25. Effect of precursor fraction on silicide nanopowder growth under thermal plasma conditions: a computational study10.1016/j.powtec.2015.11.005 ↗
26. Preparation and growth of Ni–Cu alloy nanoparticles prepared by arc plasma evaporation10.1016/j.matlet.2010.02.061 ↗
27. Large scale synthesis of copper nickel alloy nanoparticles with reduced compressibility using arc thermal plasma process10.1038/s41598-021-86776-0 ↗
28. Aichi Synchrotron Radiation Center, BL5S2 General Material Evaluation I (X-ray Diffraction).
29. Orientation mapping of nanostructured materials using transmission Kikuchi diffraction in the scanning electron microscope10.1016/j.ultramic.2012.06.004 ↗
30. Mechanical and thermal properties of metallic and semiconductive nanostructures10.1021/jp077371n ↗
31. Computer modeling of the evolution of dendrite microstructure in binary alloys during non-isothermal solidification10.1023/A:1023022214920 ↗
32. Phase diagrams of small particles of binary systems: a theoretical approach10.1088/0957-4484/11/1/302 ↗
33. Three-dimensional visualization in powder diffraction10.4028/www.scientific.net/SSP.130.15 ↗
34. Separation of particle size and lattice strain in integral breadth measurements10.1107/S0365110X66000628 ↗
35. Anisotropic Sm-Co nanopowder prepared by induction thermal plasma10.1016/j.jallcom.2021.160633 ↗
36. Thermal plasma synthesis of Fe-Co alloy nanoparticles10.1557/PROC-501-121 ↗
37. A co-condensation model for in-flight synthesis of metal-carbide nanoparticles in thermal plasma jet10.1007/s11666-008-9240-y ↗