Enhanced critical current density at high magnetic fields in MgB2 wire processed by in-situ spark plasma sintering
Source abstract
Abstract
Abstract Sparking plasma sintering (SPS) technique has the characteristics of rapid heating and cooling rate, high mass density, and grain activation sintering. Therefore, it may be used to improve the grain connection, refine the grains, and enhance the superconducting current-carrying capacity of MgB2. In this paper, the MgB2 wire prepared by the in-situ method is rapidly treated by the SPS method, and the effects of different SPS sintering conditions on the phase formation, microstructure characteristics and superconductivity of the MgB2 material are studied, and compared with the MgB2 prepared by conventional sintering and the ex-situ SPS method. It was found that the SPS-treated samples were in a rapidly changing non-equilibrium state during the entire sintering process, so there are existing both flake particles and nanoparticles in the samples, which significantly improves the connection of the grains and refine the grains, resulting in significantly improved superconducting performance for MgB2. The critical current density Jc of SPS-treated sample at 850 ℃ reached 1354 A/cm2 @ (10 K, 5 T) and 1615 A/cm2 @ (20 K, 3 T), which were 3.7 times and 2.6 times that of conventional sintering sample. Our research shows that SPS is an effective method to improve the superconductivity of in-situ MgB2 wire.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Superconductivity in MgB2 and Alloys · Boron and Carbon Nanomaterials Research · Physics of Superconductivity and Magnetism
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Superconductivity at 39 K in magnesium diboride10.1038/35065039 ↗
2. A tabletop persistent-mode, liquid helium-free 1.5-T MgB2 “Finger” MRI magnet: construction and operation of a prototype magnet10.1109/TASC.2019.2900057 ↗
3. MgB2 for MRI applications: dual sintering induced performance variations in in situ and IMD processed MgB2 conductors10.1039/C9TC06114B ↗
4. Fabrication of (6+1)-structure superconducting cable based on 30-core MgB2 superconducting wire
5. Enhanced higher temperature irreversibility field and critical current density in MgB2 wires with Dy2O3 additions10.1088/1361-6668/abc73c ↗
6. The development of MgB2 superconducting wires fabricated with an internal Mg diffusion (IMD) process10.1088/0953-2048/29/11/113004 ↗
7. Development and superconducting properties of practical 18-and 30-filamentary MgB2 long wires with twisting by the in situ way10.1007/s10948-020-05536-9 ↗
8. Synthesis temperature effects on ex-situ manufactured MgB2 wires useful for power applications10.1016/j.jallcom.2015.11.121 ↗
9. Large critical current density in MgB2 wire using MgB4 as precursor10.1088/0953-2048/26/7/075010 ↗
10. A new carbon source MgB2C2 for the synthesis of carbon-doped MgB2 materials10.1016/j.ssc.2018.06.011 ↗
11. A comparative study on the effects of n C, n SiC and BRH on the structural and superconducting properties of MgB2 PIT wires10.1016/j.matchemphys.2017.08.009 ↗
12. Role of Cr-coating by electroplating method on fabrication and transport properties of Fe/Cr/MgB2 wires
13. Conduction-cooled MgB2 coil in maximum self-magnetic flux density 2.3 tesla made with 300-meter-long multifilamentary MgB2 Wire
14. Critical current density defined at low electric field criterion and energy margin of superconducting MgB2 wires in wide temperature and magnetic field range10.1088/1361-6668/abced3 ↗
15. MgB2 wire diameter reduction by hot isostatic pressing—a route for enhanced critical current density10.1088/1361-6668/aac55a ↗
16. Superconducting properties of NaCl doped MgB2 bulks fabricated by hot pressed sintering10.1016/j.jallcom.2019.06.206 ↗
17. Spark plasma sintering of bulk MgB2 and levitation force measurements10.1088/1361-6668/ab5f3e ↗
18. The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method10.1007/s10853-006-6555-2 ↗
19. The discrepancies in different facets of MgB2 bulk superconductors prepared under various sintering durations by spark plasma sintering10.1088/1361-6668/abe3f2 ↗
20. Enhanced critical current density at high magnetic fields in MgB2 with Ga/In acetylacetonate processed by spark plasma sintering10.1016/j.jmrt.2020.01.109 ↗
21. Synthesis pressure-temperature effect on pinning in MgB2-based superconductors10.1007/s10948-012-2001-7 ↗
22. Superconducting characteristics of polycrystalline magnesium diboride ceramics fabricated by a spark plasma sintering technique10.1111/j.1551-2916.2005.00220.x ↗
23. Dwell time influence on spark plasma-sintered MgB210.1007/s10948-017-4236-9 ↗
24. Effects of SPS pressure on the mechanical properties of high packing ratio bulk MgB2 superconductor
25. Ex situ spark plasma sintering of short powder-in-tube MgB2 tapes with open and closed ends10.1007/s10948-018-4616-9 ↗
26. Tellurium addition as a solution to improve compactness of ex-situ processed MgB2-SiC superconducting tapes10.1088/0953-2048/29/6/065012 ↗
27. Fabrication and properties of kilometer level, Nb reinforced, 6 filamentary MgB2 wires10.1016/j.physc.2013.04.029 ↗
28. In-field Jc enhancement on Ti-sheathed MgB2 wires doped with TiC nanoparticles10.1109/TASC.2009.2018522 ↗
29. Influence of dopant particle size on the critical current properties and microstructures of MgB2 bulks doped with TiC and SiC10.1016/j.physc.2007.04.267 ↗
30. Magnetization of hard superconductors
31. Challenges of nanostructuring and functional properties for selected bulk materials obtained by reactive spark plasma sintering10.7567/JJAP.53.05FB22 ↗
32. Comparison of critical current density in SiC-doped in situ MgB2 coils and straight wire samples processed by HIP10.1088/0953-2048/26/11/115002 ↗
33. The impact of high pressure, doping and the size of crystalline boron grains on creation of high-field pinning centers in in situ MgB2 wires10.1007/s10948-018-4791-8 ↗
34. Spark plasma sintered MgB2 co-added with c-BN and C6010.1016/j.matchemphys.2015.12.040 ↗
35. Spark plasma sintering of MgB2 in the two-temperature route10.1016/j.physc.2012.01.023 ↗
36. Critical temperature of thin niobium films on heavily doped silicon10.1103/PhysRevB.47.5151 ↗
37. Carbohydrate doping to enhance electromagnetic properties of MgB2, superconductors
38. Improved critical current densities in MgB2 tapes with ZrB2 doping
39. Ge-added MgB2 superconductor obtained by ex situ spark plasma sintering10.1007/s10948-014-2705-y ↗
40. Properties of ex-situ MgB2 bulk samples prepared by uniaxial hot pressing and spark plasma sintering10.1016/j.physc.2018.05.008 ↗