journal article·2021-12

High mechanical performance Cu-intercalated layered h-BN/N-doped carbon-nanofiber composite films for selective adsorption desulphurization

Xiao-Lu Sun, Zan Liu, Zhi-Lin Cheng

Publisher page

Abstract

Abstract The Cu-intercalated layered h-BN/N-doped carbon-nanofiber composite films (PAN-Cu/ABN-CNFs) were successfully prepared by the combination of the electrospinning technique and the one-pot carbonization process, using the mixed solution of polyacrylonitrile (PAN) and Cu-intercalated activated boron nitride (Cu/ABN) as carbon precursor. A series of characterizations proved that the PAN-Cu/ABN-CNFs possessed the distinguished merits in the structure and composition, such as the pore feature of the micropore (0.076 cm3/g)-mesoporous (0.3582 cm3/g) structure, the structure of the exfoliated h-BN nanosheets, the low-coordination high-content N (11.65 at%) and the existence of self-reducing Cu nanoparticles (0.5 at%). For adapting the actual application, the mechanical properties of the PAN-Cu/ABN-CNFs were comprehensively evaluated, showing that the PAN-Cu/ABN-CNFs films had the robust tensile strength and bending properties as well as the desirable wear resistance. Furthermore, the selective adsorption desulphurization of the PAN-Cu/ABN-CNFs were examined by the selective adsorption removal of thiophene (TH) from the simulated oil, indicating that the optimum adsorption capacity of the fresh films was up to 78.38 mg/g in 800 mg/L initial concentration and the adsorption capacity after the four-time regeneration recycling still approached 74.894 mg/g. Finally, the adsorption kinetics, isotherm and thermodynamic studies suggested that the adsorption behavior of TH over the PAN-Cu/ABN-CNFs should be better described by the correlation coefficients of Avrami fractional-order kinetics and Liu isotherm, while the thermodynamic studies showed a favorable exothermic and spontaneous adsorption mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalysis and Hydrodesulfurization Studies · Supercapacitor Materials and Fabrication · Nanomaterials for catalytic reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. High performances of mesoporous g-C3N4 for adsorptive desulfurization in model gasoline (iso-octane) solutions10.1016/j.apsusc.2018.04.084 ↗
2. Enhanced adsorption selectivity of dibenzothiophene on ordered mesoporous carbon-silica nanocomposites via copper modification10.1016/j.micromeso.2015.03.016 ↗
3. Fixed bed adsorptive desulfurization of thiophene over Cu/Ni-dispersed carbon nanofiber10.1016/j.fuel.2017.11.132 ↗
4. Removal of copper (II) and phenol from aqueous solution using porous carbons derived from hydrothermal chars10.1016/j.desal.2010.09.013 ↗
5. Investigation of metal-exchanged mesoporous Y zeolites for the adsorptive desulfurization of liquid fuels10.1016/j.apcatb.2016.08.018 ↗
6. A novel approach for ultra-deep adsorptive desulfurization of diesel fuel over TiO2-CeO2/MCM-48 under ambientconditions10.1002/aic.14085 ↗
7. Enhanced adsorption of thiophene with the GO-modified bimetallic organic framework Ni-MOF-19910.1016/j.colsurfa.2019.06.019 ↗
8. Molecular simulations for adsorption and separation of thiophene and benzene in Cu-BTC and IRMOF-1 metal-organic frameworks10.1016/j.seppur.2012.04.032 ↗
9. Study on the preparation and catalytic activities of SO4 (2-) promoted metal oxide solid superacid catalysts for model oil desulfurization10.1007/s10562-016-1744-3 ↗
10. One-pot synthesis of ordered mesoporous NiMo-Al2O3 catalysts for dibenzothiophene hydrodesulfurization10.1016/j.apcatb.2016.06.004 ↗
11. Ammonia assisted functionalization of cuprous oxide within confined spaces of SBA-15 for adsorptive desulfurization10.1016/j.cej.2018.01.146 ↗
12. Adsorptive desulfurization of fuels with Cu(I)/SBA-15 via low-temperature reduction10.1016/j.micromeso.2017.05.052 ↗
13. Metal-free boron nitride adsorbent for ultra-deep desulfurization10.1002/aic.15695 ↗
14. Few-layered graphene-like boron nitride: a highly efficient adsorbent for indoor formaldehyde removal10.1021/acs.estlett.6b00426 ↗
15. Synthesis of mesoporous silica-carbon microspheres via self-assembly and in-situ carbonization for efficient adsorption of Di-n-butyl phthalate10.1016/j.cej.2019.03.128 ↗
16. Preparation of gold-decorated simple and sulfur-doped carbon spheres for desulfurization of fuel10.1016/j.jclepro.2020.121684 ↗
17. Adsorption of nitroimidazole antibiotics from aqueous solutions on self-shaping porous biomass carbon foam pellets derived from Vallisneria natans waste as a new adsorbent10.1016/j.scitotenv.2019.01.412 ↗
18. Hollow carbon spheres/graphene hybrid aerogels as high-performance adsorbents for organic pollution10.1016/j.seppur.2018.12.032 ↗
19. Flexible, ultrafine and abundant microporous carbon nanofibers prepared by electrospinning from resole-type liquefied biomass-based resin10.1007/s10934-017-0464-4 ↗
20. Porous, flexible, and core-shell structured carbon nanofibers hybridized by tin oxide nanoparticles for efficient carbon dioxide capture10.1016/j.jcis.2019.10.034 ↗
21. Hierarchical C/NiO-ZnO nanocomposite fibers with enhanced adsorption capacity for Congo red10.1016/j.jcis.2018.11.045 ↗
22. Adsorptive desulfurization of diesel oil using nickel nanoparticle-doped activated carbon beads with/without carbon nanofibers: effects of adsorbate size and adsorbent texture10.1016/j.fuel.2016.10.044 ↗
23. Adsorptive performance of chromium-containing ordered mesoporous silica on volatile organic compounds (VOCs)10.1016/j.ngib.2017.10.003 ↗
24. Simultaneous adsorptive desulfurization of diesel fuel over bimetallic nanoparticles loaded on activated carbon10.1016/j.jclepro.2017.11.208 ↗
25. Hierarchical N-doped carbons from designed N-rich polymer: adsorbents with a record-high capacity for desulfurization10.1002/aic.16357 ↗
26. Adsorptive desulfurization of model fuel by S, N-doped porous carbons based on polybenzoxazine10.1016/j.fuel.2018.01.043 ↗
27. Fast carbon nanofiber growth on the surface of activated carbon by microwave irradiation: a modified nano-adsorbent for deep desulfurization of liquid fuels10.1016/j.cej.2015.01.059 ↗
28. Flexible design of carbon nanotubes grown on carbon nanofibers by PECVD for enhanced Cr(VI) adsorption capacity10.1016/j.seppur.2018.06.065 ↗
29. Environmental aspects of use of recycled carbon fiber composites in automotive applications10.1021/acs.est.7b04069 ↗
30. Nitrogen-doped porous carbon nanofiber webs as anodes for lithium ion batteries with a super high capacity and rate capability10.1002/adma.201104634 ↗
31. Graphitized porous carbon nanofibers prepared by electrospinning as anode materials for lithium ion betters
32. Electrospun crosslinked poly-cyclodextrin nanofibers: Highly efficient molecular filtration thru host-guest inclusion complexation10.1038/s41598-017-07547-4 ↗
33. MKEY, a Peptide Inhibitor of CXCL4-CCL5 Heterodimer Formation, Protects Against Stroke in Mice
34. Electrospinning preparation and mechanical properties of PVA/HNTs composite nanofibers10.1002/pat.3975 ↗
35. Preparation and mechanical properties of PAN/HNTs composite nanofibers
36. Electrospinning preparation and mechanical properties of polymethyl methacrylate (PMMA)/halloysite nanotubes (HNTs) composite nanofibers
37. Biocompatible hydroxylated boron nitride nanosheets/poly(vinyl alcohol) interpenetrating hydrogels with enhanced mechanical and thermal responses10.1021/acsnano.6b08408 ↗
38. A mechanically robust double-network hydrogel with high thermal responses via doping hydroxylated boron nitride nanosheets10.1007/s10853-018-3037-2 ↗
39. Macroscopic 3D boron nitride monolith for efficient adsorptive desulfurization10.1016/j.fuel.2019.116448 ↗
40. A flexible N-doped carbon-nanofiber film reinforced by halloysite nanotubes(HNTs) for adsorptive desulfurization10.1016/j.jhazmat.2020.123851 ↗
41. Design and fabrication of in-situ N-doped paper-like carbon nanofiber film for thiophene removal from a liquid model fuel10.1016/j.jhazmat.2019.121879 ↗
42. Electrospinning fabrication for cloth-like carbon nanofiber films with hierarchical porous structure and their application in deep desulfurization10.1016/j.ecoenv.2020.110555 ↗
43. High-efficiency and selective adsorption of organic pollutants by magnetic CoFe2O4/graphene oxide adsorbents: Experimental and molecular dynamics simulation study10.1016/j.seppur.2019.116400 ↗
44. Synthesis and adsorption properties of halloysite/carbon nanocomposites and halloysite-derived carbon nanotubes10.1016/j.clay.2015.10.029 ↗
45. Study on the changes of structures and properties of PAN fibers during the cyclic reaction in supercritical carbon dioxide10.3390/polym11030402 ↗
46. Preparation and tribological properties of hydrothermally exfoliate dultrathin hexagonal boron nitride nanosheets (BNNSs) in mixed NaOH/KOH solution10.1016/j.jallcom.2019.01.108 ↗
47. Forward looking analysis approach to assess copper acetate thermal decomposition reaction mechanism10.4236/ajac.2019.105014 ↗
48. Environmentally friendly, scalable exfoliation for few-layered hexagonal boron nitride nanosheets (BNNSs) by multi-time thermal expansion based on released gases10.1039/C9TC03985F ↗
49. Boron nitride colloidal solutions, ultralight aerogels and freestanding membranes through one-step exfoliation and functionalization10.1038/ncomms9849 ↗
50. Synthesis of SnO2 versus Sn crystals within N-doped porous carbon nanofibers via electrospinning towards high-performance lithium ion batteries10.1039/C5NR09305H ↗
51. A facile chemical exfoliation method to obtain large size boron nitride nanosheets10.1039/c2ce26446c ↗
52. Preparation of novel adsorbents based on combinations of polysiloxanes and sewage sludge to remove pharmaceuticals from aqueous solutions10.1016/j.colsurfa.2016.03.021 ↗
53. CO2 capturing performances of millimeter scale beads made by tetraethylenepentamine loaded ultra-fifine palygorskite powders from jet pulverization10.1016/j.cej.2018.02.040 ↗
54. Adsorptive desulfurization of thiophene, benzothiophene and dibenzothiophene over activated carbon manganese oxide nanocomposite: with column system evaluation10.1016/j.jclepro.2017.03.169 ↗
55. Few layered oxidized h-BN as nanofiller of cellulose-based paper with superior antibacterial response and enhanced mechanical/thermal performance10.3390/ijms21155396 ↗
56. Pilot study of the relationship between the hardness and abrasion resistance of two base metal alloys used for metal-ceramic restorations10.1067/mpr.2001.112413 ↗
57. Discarded clothing acrylic yarns: low-cost raw materials for deformable c nanofibers applied to flexible sodium-ion batteries10.1016/j.electacta.2020.136988 ↗
58. Abrasion resistance of biaxially oriented polypropylene films coated with nanocomposite hard coatings10.1016/j.apsusc.2013.08.112 ↗
59. Interfacing superhydrophobic silica nanoparticle films with graphene and thermoplastic polyurethane for wear/abrasion resistance10.1016/j.jcis.2018.02.065 ↗
60. Graphene-like porous carbon nanostructure from Bengal gram bean husk and its application for fast and efficient adsorption of organic dyes10.1016/j.apsusc.2019.01.138 ↗
61. A large number of low coordinated atoms in boron nitride for outstanding adsorptive desulfurization performance10.1039/C5GC02999F ↗
62. Preparation of magnetic hierarchical porous carbon spheres with graphitic features for high methyl orange adsorption capacity10.1016/j.carbon.2018.03.093 ↗
63. Adsorptive removal of dibenzothiophene from diesel fuel using microwave synthesized carbon nanomaterials10.1016/j.fuel.2019.01.006 ↗
64. Efficient DBT removal from diesel oil by CVD synthesized N-doped grapheneas a nanoadsorbent: equilibrium, kinetic and DFT study10.1016/j.ecoenv.2019.01.042 ↗
65. Desulfurization of model oil by selective adsorption over porous boron nitride fibers with tailored10.1038/s41598-017-03600-4 ↗
66. Study on a nitrogen-doped porous carbon from oil sludge for CO2 adsorption10.1016/j.fuel.2019.04.046 ↗
67. Heteroatom-doped porous carbons from sucrose and phytic acid for adsorptive desulfurization and sulfamethoxazole removal: a comparison between aqueous and non-aqueous adsorption10.1016/j.jcis.2019.09.032 ↗