journal article·2021-11

Layered double hydroxides as high-performance anode material for potassium ion battery

Qili Yang, Kaikai Lv, Lanju Liang, Ji Ma, Chunting Liu, Xin Yan, Meng Wang, Haiyun Yao, Dequan Wei, Dianguo Ma, Kang Xie

Publisher page

Abstract

Abstract In recent years, potassium ion batteries (PIBs) with capacitor-like rate performance and battery-like capacity are highly desirable. To this aim, layered double hydroxides (LDHs) are studied in this work to evaluate the feasibility of employing LDHs as anode materials for PIBs. Our results show MgFe-LDH that contains trivalent iron cations with variable valence states can deliver K+-storage capacity of 371.6 mAh g–1 after running for 300 cycles at 0.1 A g–1 with an initial Coulombic efficiency of 88.4%. In contrast, MgAl-LDH that represents LDHs excluding multivalent metal elements merely delivers a capacity of 195.3 mAh g-1 under the same test condition but with a much higher initial Coulombic efficiency of 99.4%. Further study shows an electrical double layer effect is dominant to storing K+ for MgAl-LDH anode, while a faradaic process involving a conversion reaction between Fe3+ and Fe2+ is prevalent in MgFe-LDH anode. Rate performance of the MgFe-LDH/K cell shows its capacity retentions at 1, 2, 5, 10 A g–1 are 60.9%, 51.3%, 42.9%, 39.5%, respectively, which exhibit cause-effect relationships with its intrinsic poor conductivity and a non-efficient grinding event at high current densities. Besides, by measuring EIS spectra at different temperatures, the apparent activation energy is calculated to be 79.5 kJ mol–1. It is thus anticipated that this study will shed new light on developing LDHs as powerful anode materials for PIBs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Supercapacitor Materials and Fabrication · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Hard carbon microspheres: potassium-ion anode versus sodium-ion anode10.1002/aenm.201501874 ↗
2. Potassium secondary batteries10.1021/acsami.6b07989 ↗
3. Electrochemical intercalation of potassium into graphite10.1002/adfm.201602248 ↗
4. Potassium ion batteries with graphitic materials10.1021/acs.nanolett.5b03667 ↗
5. K-ion batteries based on a P2-type K0.6CoO2 cathode10.1002/aenm.201700098 ↗
6. Investigation of potassium storage in layered P3-Type K0.5MnO2 cathode10.1002/adma.201702480 ↗
7. Non-aqueous K-ion battery based on layered K0.3MnO2 and hard carbon/carbon black10.1149/2.0921607jes ↗
8. Earth abundant fe/mn-based layered oxide interconnected nanowires for advanced K-ion full batteries10.1021/acs.nanolett.6b04611 ↗
9. Carbon electrodes for K-ion batteries10.1021/jacs.5b06809 ↗
10. A porous network of bismuth used as the anode material for high-energy-density potassium-ion batteries10.1002/anie.201801389 ↗
11. Boosting the Potassium storage performance of alloy-based anode materials via electrolyte salt chemistry
12. Gelified acetate-based water-in-salt electrolyte stabilizing hexacyanoferrate cathode for aqueous potassium-ion batteries10.1016/j.ensm.2020.04.028 ↗
13. Water-in-salt electrolyte for potassium-ion batteries10.1021/acsenergylett.8b00009 ↗
14. Non-flammable phosphate electrolyte with high salt-to-solvent ratios for safe potassium-ion battery10.1149/2.1171906jes ↗
15. Graphite as a potassium ion battery anode in carbonate-based electrolyte and ether-based electrolyte10.1016/j.jpowsour.2018.10.092 ↗
16. Nitrogen/oxygen co-doped mesoporous carbon octahedrons for high-performance potassium-ion batteries10.1039/C8TA12504J ↗
17. Structural and interface design of hierarchical porous carbon derived from soybeans as anode materials for potassium-ion batteries10.1016/j.jpowsour.2020.228172 ↗
18. Enhanced K-ion kinetics in a layered cathode for potassium ion batteries10.1039/C9CC03156A ↗
19. Electrolyte-regulated solid-electrolyte interphase enables long cycle life performance in organic cathodes for potassium-ion batteries
20. Investigation of the Prussian blue analog Co3[Co(CN)6]2 as an anode material for nonaqueous potassium-ion batteries10.1002/adma.201802510 ↗
21. Boosting potassium-ion batteries by few-layered composite anodes prepared via solution-triggered one-step shear exfoliation10.1038/s41467-018-05786-1 ↗
22. Encapsulating NiS nanocrystal into nitrogen-doped carbon framework for high performance sodium/potassium-ion storage10.1016/j.cej.2019.123675 ↗
23. Synthesis of a Fe3O4 nanosphere@Mg-Al layered-double-hydroxide hybrid and application in the fabrication of multifunctional epoxy nanocomposites10.1021/acs.iecr.5b04873 ↗
24. Recent advances in the synthesis and application of layered double hydroxide (LDH) nanosheets10.1021/cr200434v ↗
25. Temperature-controlled electrochemical switch based on layered double hydroxide/poly(N-isopropylacrylamide) ultrathin films fabricated via layer-by-layer assembly10.1021/la3012603 ↗
26. Synthesis and anion exchange chemistry of rhombohedral li/al layered double hydroxides10.1021/cm0105099 ↗
27. Hierarchical nanocomposites derived from nanocarbons and layered double hydroxides-properties, synthesis, and applications10.1002/adfm.201102222 ↗
28. Ag nanoparticles supported on MgAl-LDH decorated wood veneer with enhanced flame retardancy, water repellency and antimicrobial activity10.1016/j.colsurfa.2020.124878 ↗
29. Ca-Al, Ni-Al and Zn-Al LDH powders as efficient materials to treat synthetic effluents containing o-nitrophenol10.1016/j.jallcom.2020.155628 ↗
30. Adsorption of organic and inorganic arsenic from aqueous solutions using MgAl-LDH with incorporated nitroprusside10.1016/j.jcis.2020.04.078 ↗
31. Hierarchical p-n heterostructure BiOI@ZnTi-LDH for Cr(VI) reduction under visible light10.1016/j.jallcom.2020.154898 ↗
32. Interface engineering for enhancing electrocatalytic oxygen evolution of NiFe LDH/NiTe heterostructures10.1016/j.apcatb.2020.119014 ↗
33. Synergistic coupling of NiTe nanoarrays with RuO2 and NiFe-LDH layers for high-efficiency electrochemical-/photovoltage-driven overall water splitting10.1016/j.apcatb.2020.118988 ↗
34. Oxygen vacancies engineering in TiO2 homojunction/ZnFe-LDH for enhanced photoelectrochemical water oxidation10.1016/j.cej.2020.125101 ↗
35. Constructing NiFe-LDH wrapped Cu2O nanocube heterostructure photocatalysts for enhanced photocatalytic dye degradation and CO2 reduction via Z-scheme mechanism10.1016/j.jallcom.2020.154723 ↗
36. Integrated glycerol- and ethanol-based chemical synthesis routes using Cu-Mg-Al LDH-derived catalysts without external hydrogen: Intervention of bio-ethanol co-fed with glycerol10.1016/j.renene.2020.04.151 ↗
37. Facile preparation of a Ni/Mn-LDH nanosheet @graphene foam hierarchical structure for high-performance flexible supercapacitors10.1016/j.materresbull.2020.110889 ↗
38. Towards ultra-stable lithium metal batteries: interfacial ionic flux regulated through LiAl LDH-modified polypropylene separator10.1016/j.cej.2020.125187 ↗
39. CoFe-Cl layered double hydroxide: a new cathode material for high-performance chloride ion batteries10.1002/adfm.201900983 ↗
40. Aeropectin: fully biomass-based mechanically strong and thermal superinsulating aerogel10.1021/bm500345u ↗
41. Preparation of monolithic titania aerogels with high surface area by a sol-gel process combined surface modification10.1039/C4RA03812F ↗
42. A self-template and self-activation co-coupling green strategy to synthesize high surface area ternary-doped hollow carbon microspheres for high performance supercapacitors10.1016/j.jcis.2018.04.027 ↗
43. Direction-specific interactions control crystal growth by oriented attachment10.1126/science.1219643 ↗
44. Bi-continuous nanoporous carbon sphere derived from SiOC as high-performance anodes for PIBs10.1016/j.cej.2019.122677 ↗
45. Where do batteries end and supercapacitors begin?10.1126/science.1249625 ↗
46. Core and valence level photoemission studies of iron oxide surfaces and the oxidation of iron10.1016/0039-6028(77)90239-4 ↗
47. Supercritical fluid synthesis of magnetic hexagonal nanoplatelets of magnetite10.1021/ja105079y ↗
48. Analysis of XPS spectra of Fe2+ and Fe3+ ions in oxide materials10.1016/j.apsusc.2007.09.063 ↗
49. A photo-responsive bifunctional electrocatalyst for oxygen reduction and evolution reactions10.1016/j.nanoen.2017.11.020 ↗
50. Bifunctional transition metal hydroxysulfides: room-temperature sulfurization and their applications in Zn-air batteries
51. Amorphous bimetallic oxide-graphene hybrids as bifunctional oxygen electrocatalysts for rechargeable Zn-air batteries10.1002/adma.201701410 ↗
52. Pyrite FeS2 for high-rate and long-life rechargeable sodium batteries10.1039/C4EE03759F ↗
53. Stable layered Ni-rich LiNi0.9Co0.07Al0.03O2 microspheres assembled with nanoparticles as high-performance cathode materials for lithium-ion batteries10.1039/C6TA09921A ↗
54. Construction of hierarchical K0.7Mn0.7Mg0.3O2 microparticles as high capacity & long cycle life cathode materials for low-cost potassium-ion batteries10.1016/j.cej.2019.123649 ↗