journal article·2021-11

The thermoelectric and mechanical properties of Mg2(Si0.3Sn0.7)0.99Sb0.01 prepared by one-step solid state reaction combined with hot-pressing

Heming Huang, Pengfei Wen, Shu Deng, Xilong Zhou, Bo Duan, Yao Li, Pengcheng Zhai

Publisher page

Abstract

Abstract Achieving high-performance by an effective and convenient preparation method is of great significance to the application of thermoelectric materials. Herein, we propose a facile method combined one-step solid state reaction (SSR) with hot pressing (HP) to fabricate Mg2(Si0.3Sn0.7)0.99Sb0.01. Although the main products after the SSR are Mg2Si and Mg2Sn compounds as well as various Mg2Si1−xSnx phases, the compact bulk sample with anti-fluorite structure is obtained in 2 h of HP process by controlling HP temperature. The obtained Mg2(Si0.3Sn0.7)0.99Sb0.01 exhibits a decent figure of merit of 1.37 at 673 K associated with a flexural strength of 74 MPa, which is fully comparable with the samples prepared by the method of two-step SSR combined with sintering technique, but the process of our method is obviously simplified.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Expansion and Ionic Conductivity · Heusler alloys: electronic and magnetic properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
2. Thermoelectric cooling and power generation10.1126/science.285.5428.703 ↗
3. Complex thermoelectric materials10.1038/nmat2090 ↗
4. Advances in thermoelectric materials research: Looking back and moving forward10.1126/science.aak9997 ↗
5. Solid solution formation in Mg2(Si,Sn) and shape of the miscibility gap10.1016/j.actamat.2019.11.054 ↗
6. Mechanical properties of half-Heusler alloys10.1016/j.actamat.2016.01.031 ↗
7. Mechanical properties of thermoelectric n-type magnesium silicide synthesized employingin situspark plasma reaction sintering10.1088/2053-1591/aa76a8 ↗
8. Highly effective Mg2Si1−xSnx thermoelectrics10.1103/PhysRevB.74.045207 ↗
9. Roles of interstitial Mg in improving thermoelectric properties of Sb-doped Mg2Si0.4Sn0.6 solid solutions10.1039/c2jm16694a ↗
10. Thermoelectric properties of highly efficient Bi-doped Mg2Si1−x−ySnxGey materials10.1016/j.actamat.2014.04.060 ↗
11. Convergence of conduction bands as a means of enhancing thermoelectric performance of n-type Mg2Si1-xSnx solid solutions10.1103/PhysRevLett.108.166601 ↗
12. Eco-friendly high-performance silicide thermoelectric materials10.1093/nsr/nwx011 ↗
13. Enhanced thermoelectric performance of Mg2Si0.4Sn0.6 solid solutions by in nanostructures and minute Bi-doping
14. Thermoelectric properties of Sb-doped Mg2Si0.3Sn0.710.1007/s11664-011-1541-0 ↗
15. Transport and mechanical properties of High-ZT Mg2.08Si0.4−xSn0.6Sbx thermoelectric materials10.1007/s11664-013-2865-8 ↗
16. Optimized thermoelectric properties of Sb-doped Mg2(1+z)Si0.5–ySn0.5Sby through adjustment of the Mg content10.1021/cm202445d ↗
17. Improved trade-off between thermoelectric performance and mechanical reliability of Mg2Si by hybridization of few-layered reduced graphene oxides10.1016/j.scriptamat.2018.11.052 ↗
18. Morphology modulation of SiC nano-additives for mechanical robust high thermoelectric performance Mg2Si1−xSnx/SiC nano-composites10.1016/j.scriptamat.2016.08.010 ↗
19. Mechanical and thermoelectric properties of intragranular SiC- nanoparticle/Mg2Si composites10.1016/j.jallcom.2018.10.066 ↗
20. High figures of merit and natural nanostructures in Mg2Si0.4Sn0.6 based thermoelectric materials
21. Preparation of Mg2Si1-xSnx by induction melting and spark plasma sintering, and thermoelectric properties10.1007/s11664-010-1310-5 ↗
22. High Thermoelectric Performance in Mg2(Si0.3Sn0.7) by Enhanced Phonon Scattering10.1021/acsaem.8b02148 ↗
23. Microstructural effects on thermoelectric efficiency: a case study on magnesium silicide10.1016/j.actamat.2014.05.041 ↗
24. Thermoelectric properties of materials near the band crossing line in Mg2Sn-Mg2Ge-Mg2Si system10.1016/j.actamat.2015.11.006 ↗
25. Enhancing the zT value of Bi-doped Mg2Si0.6Sn0.4 materials through reduction of bipolar thermal conductivity10.1021/acsami.7b09125 ↗
26. Microstructure and mechanical stability of Bi doped Mg2Si0.4Sn0.6 thermoelectric material10.1016/j.jallcom.2019.152888 ↗
27. Synthesis of p-type Mg2Si1-xSnx with x = 0-1 and optimization of the synthesis parameters10.1016/j.matpr.2019.02.052 ↗
28. Ultrafast and low-cost preparation of Mg2(Si0.3Sn0.7)1−ySby with superior thermoelectric performance by self-propagating high-temperature synthesis10.1016/j.scriptamat.2018.12.027 ↗
29. Low-temperature solid state reaction synthesis and thermoelectric properties of high-performance and low-cost Sb-doped Mg2Si0.6Sn0.4
30. Ultra rapid fabrication of p-type Li-doped Mg2Si0.4Sn0.6 synthesized by unique melt spinning method10.1016/j.scriptamat.2015.12.031 ↗
31. Enhanced power factor of Mg2Si0.3Sn0.7 synthesized by a non-equilibrium rapid solidification method10.1016/j.scriptamat.2014.09.009 ↗
32. Phase segregation and superior thermoelectric properties of Mg2Si1-xSbx (0 ≤ x ≤ 0.025) prepared by ultrafast self-propagating high-temperature synthesis10.1021/acsami.5b11063 ↗
33. In situ nanostructure design leading to a high figure of merit in an eco-friendly stable Mg2Si0.30Sn0.70 solid solution10.1039/C5RA27171A ↗
34. Simultaneous enhancement of mechanical and thermoelectric properties of polycrystalline magnesium silicide with conductive glass inclusion10.1016/j.actamat.2014.04.007 ↗
35. Bulk nanostructured thermoelectric materials: preparation, structure and properties10.1007/s11664-009-1037-3 ↗
36. Optimization of the electronic band structure and the lattice thermal conductivity of solid solutions according to simple calculations: a canonical example of the Mg2Si1–x–yGexSny ternary solid solution10.1021/acs.chemmater.6b02308 ↗
37. Thermoelectric and mechanical properties of environmentally friendly Mg2Si0.3Sn0.67Bi0.03/SiC composites10.1021/acsami.9b15348 ↗
38. Nanostructure and doping stimulated phase separation in high-ZT Mg2Si0.55Sn0.4Ge0.05 compounds10.1016/j.actamat.2014.09.031 ↗
39. Thermoelectric properties of Bi-doped Mg2Si0.6Sn0.4 solid solutions synthesized by two-step low temperature reaction combined with hot pressing
40. Enhanced thermoelectric properties of n-type Mg2.16(Si0.4Sn0.6)1−ySby due to nano-sized Sn-rich precipitates and an optimized electron concentration10.1039/c2jm31919e ↗
41. The maximum possible conversion efficiency of silicon‐germanium thermoelectric generators10.1063/1.349385 ↗
42. Enhanced hole concentration through Ga doping and excess of Mg and thermoelectric properties of p-type Mg2(1+z)(Si0.3Sn0.7)1−yGay10.1016/j.intermet.2012.07.027 ↗
43. Solid-state synthesis and thermoelectric properties of Mg2Si1−xSnx10.1007/s11664-012-2296-y ↗
44. Enhanced thermoelectric performance of Te-doped skutterudite with nano-micro-porous architecture10.1016/j.scriptamat.2018.09.015 ↗
45. Effect of porosity and crack on the thermoelectric properties of expanded graphite/carbon fiber reinforced cement‐based composites10.1002/er.5437 ↗
46. Enhancement of thermoelectric figure of merit by the insertion of multi-walled carbon nanotubes in α-MgAgSb10.1063/1.5042265 ↗
47. Variation of thermoelectric figure-of-merits for Mg2SixSn1-x solid solutions10.1088/1361-6463/abc0bf ↗
48. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states10.1126/science.1159725 ↗
49. Enhanced thermoelectric performance of solution-derived bismuth telluride based nanocomposites via liquid-phase sintering10.1016/j.nanoen.2016.10.056 ↗
50. Recent advances in thermoelectric nanocomposites10.1016/j.nanoen.2011.10.001 ↗
51. Rowe · 2006
52. Thermoelectric properties of n-type Bi2(Te0.85Se0.15)3 single crystals doped with CuBr and SbI310.1103/PhysRevB.85.125207 ↗
53. Nano- and microstructure engineering: an effective method for creating high efficiency magnesium silicide based thermoelectrics10.1021/acsami.6b12297 ↗
54. Effect of spark plasma sintering conditions on the thermoelectric properties of (Bi0.25Sb0.75)2Te3 alloys10.1016/j.jallcom.2016.03.284 ↗
55. Spark plasma sintering and thermoelectric evaluation of nanocrystalline magnesium silicide (Mg2Si)10.1007/s10853-012-6959-0 ↗
56. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
57. Thermal fatigue and waste heat recovery via thermoelectrics10.1007/s11664-012-2083-9 ↗
58. Nanomechanics of Hall–Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗