Tailoring damping properties by electron irradiation in Ni-Mn-Ga shape memory alloys in a wide high-temperature range
Source abstract
Abstract
Abstract Damping devices need to maintain a high internal friction value in a wide high-temperature range in an aviation environment. Damping behavior is sensitive to defects including vacancies, interstitials, and dislocations. Electron irradiation is an effective method to introduce defects into materials to tailor the damping properties. The relaxation internal friction peak value increases first and then decreases with the increase of irradiation dose in Ni54Mn25Ga21 alloy. The peak value increases from 0.04 to 0.055 by 37.5% after irradiated by 1.2 MeV electrons at 2 × 1017 e/cm2. It derives from the effect of dislocations on the interaction between interstitials and twin boundaries. The high isothermal internal friction remains stable with a large working temperature range of 160 ℃ from 50 ℃ to 210 ℃. This research provides a new method to obtain high damping Ni54Mn25Ga21 alloy with a wide high-temperature range.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Active and passive damping of noise and vibrations through shape memory alloys: applications and mechanisms10.1088/0964-1726/14/5/001 ↗
2. Seismic response control using shape memory alloys: a review10.1177/1045389X11411220 ↗
3. Precision positioning of hard disk drives using piezoelectric actuators with passive damping10.1109/TMECH.2007.915067 ↗
4. Design, fabrication, and properties of high damping metal matrix composites—a review10.3390/ma2030958 ↗
5. Superelastic effect in polycrystalline ferrous alloys10.1126/science.1202232 ↗
6. Nanoscale shape-memory alloys for ultrahigh mechanical damping10.1038/nnano.2009.142 ↗
7. Submicron-porous NiTi and NiTiNb shape memory alloys with high damping capacity fabricated by a new top-down process10.1016/j.matdes.2015.04.028 ↗
8. High damping capacity in a wide temperature range of a compositionally graded TiNi alloy prepared by electroplating and diffusion annealing10.1016/j.msea.2014.11.034 ↗
9. Evaluation of shape memory effect and damping characteristics of Cu–Al–Be–Mn shape memory alloys10.1016/j.pisc.2016.04.041 ↗
10. 12% magnetic field-induced strain in Ni-Mn-Ga-based non-modulated martensite10.1063/1.4775677 ↗
11. 2006 · vol. 16 · 1
12. Shape memory effect of grain refined Ni54Mn25Ga21 alloy with high transformation temperature10.1016/j.scriptamat.2004.07.010 ↗
13. Composite structure modeling and mechanical behavior of particle reinforced metal matrix composites10.1016/j.msea.2014.01.024 ↗
14. Ni56Mn25−xCuxGa19 (x = 0, 1, 2, 4, 8) high-temperature shape-memory alloys10.1016/j.jallcom.2008.07.016 ↗
15. Microstructure and shape-memory characteristics of Ni56Mn25−xCoxGa19 (x = 4, 8) high-temperature shape-memory alloys10.1016/j.intermet.2010.08.009 ↗
16. Giant magnetic-field-induced strain in NiMnGa seven-layered martensitic phase10.1063/1.1458075 ↗
17. Characterization and properties of ferromagnetic shape memory alloys10.1016/j.matchar.2011.09.004 ↗
18. Internal friction behaviour of Ni–Mn–Ga10.1016/j.msea.2003.07.008 ↗
19. Low-frequency damping properties of near-stoichiometric Ni2MnGa shape memory alloys under isothermal conditions10.1016/j.scriptamat.2008.07.006 ↗
20. High damping capacity of a Ni-Cu-Mn-Ga alloy in wide ambient-temperature range10.1016/j.jallcom.2016.11.132 ↗
21. Martensitic microstructure and its damping behavior inNi52Mn16Fe8Ga24single crystals10.1103/PhysRevB.73.092101 ↗
22. Snoek-type high-damping alloys realized in β-Ti alloys with high oxygen solid solution10.1002/adma.200600128 ↗
23. Twofold role of dislocations in the relaxation behavior of Ti–Ni martensite10.1016/j.actamat.2007.10.013 ↗
24. Vacancies and carbon impurities inα- iron: electron irradiation10.1103/PhysRevB.25.762 ↗
25. Cao · Phys. Status Solidi · 2010 · 6 · 235510.1002/pssc.200982131 ↗
26. Study of Ni50+xMn25Ga25−x (x = 2–11) as high-temperature shape-memory alloys10.1016/j.actamat.2006.10.014 ↗
27. Mechanical and shape memory properties of Ni54Mn25Ga21 high-temperature shape memory alloy10.1016/j.msea.2006.02.163 ↗
28. Low frequency damping properties of a NiMnTi shape memory alloy10.1016/j.matlet.2010.09.073 ↗
29. Damping capacity of Ni–Mn–Ga–Gd high-temperature shape memory thin film10.1007/s40830-018-0182-z ↗
30. High-damping properties of Mn–Cu sintered alloys10.1016/j.msea.2006.05.163 ↗
31. Effects of frequency, composition, hydrogen and twin boundary density on the internal friction of Ti50Ni50−xCux shape memory alloys10.1016/j.actamat.2006.06.018 ↗
32. Inherent internal friction of B2→R and R→B19′ martensitic transformations in equiatomic TiNi shape memory alloy10.1016/j.scriptamat.2006.04.044 ↗
33. High damping capacity in a wide ambient-temperature range in hydrogen-doped and hydrogen-free Ti–45Pd–5Cr martensitic alloy10.1016/j.scriptamat.2009.06.033 ↗
34. Anelastic contributions and transformed volume fraction during thermoelastic martensitic transformations10.1103/PhysRevB.57.5684 ↗
35. Dai · Preprint · 2020
36. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
37. Low-frequency internal friction of hydrogen-free and hydrogen-doped NiTi alloys10.1016/j.actamat.2007.03.020 ↗
38. High isothermal internal friction over a large temperature range for dual-phase Ni–Mn–In magnetic shape memory alloy10.1016/j.scriptamat.2014.05.018 ↗