Interdiffusion behavior in 304L SS/Ti–5Ta–2Nb system
Source abstract
Abstract
Abstract This paper presents the results of an experimental and computational study on interdiffusion and related structure-property changes in 304 L stainless steel/Ti–5Ta–2Nb system. Diffusion annealing treatments were carried out in the temperature range of 873–1173 K, above and below the β transus temperature of Ti. The formation of σ, FeTi and Fe2Ti phases at the interface as well as stabilization of α-Fe and β-Ti in 304 L SS and TiTaNb respectively has been unambiguously established in this study. Growth kinetics of the reaction zones has been determined and effective interdiffusion coefficients in various phases were calculated using Wagner's approach. Temperature dependant variations in the mechanical property of the base materials and diffusion couples have also been predicted using JMatPro® and compared with literature. Finally, the evolution of microstructure at the interface and diffusion path in the diffusion couples were compared with SS/Ti based diffusion bonded joints and explosive clads to understand the interdiffusion behavior under equilibrium and non-equilibrium conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Corrosion and microstructural aspects of dissimilar joints of titanium and type 304L stainless steel10.1016/S0022-3115(03)00194-6 ↗
2. Materials development and corrosion problems in nuclear fuel reprocessing plants10.1016/j.pnucene.2005.07.001 ↗
3. High corrosion resistant Ti–5%Ta–1.8%Nb alloy for fuel reprocessing application10.1016/S0022-3115(03)00302-7 ↗
4. Corrosion behavior of weldments of Ti and Ti-5Ta for nuclear fuel reprocessing plants10.1007/BF02646452 ↗
5. Bulletin alloy phase diagrams
6. Phase equilibria between γ-Fe (A1) and Fe2Ti Laves (C14) phases and microstructure in Fe-Ti-Ni ternary system at elevated temperatures10.4028/www.scientific.net/MSF.561-565.435 ↗
7. Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel10.1016/j.matdes.2013.07.044 ↗
8. Diffusion bonded transition joints of titanium to stainless steel with improved properties10.1016/S0921-5093(03)00298-3 ↗
9. Experimental investigation of phase equilibria in the Ti-Fe-Cr ternary system10.1016/j.calphad.2017.05.006 ↗
10. Experimental study of the Fe–Ni–Ti system10.1016/j.intermet.2009.08.008 ↗
11. Phase equilibria of the Fe-Nb-Ti system at 900°C10.1016/j.jallcom.2004.12.017 ↗
12. Diffusion bonding of titanium to 304 stainless steel10.1016/j.jnucmat.2003.07.004 ↗
13. Joining of titanium/stainless steel by explosive welding and effect on interface10.1016/j.jmatprotec.2005.06.045 ↗
14. Joining of titanium to 304L stainless steel by friction welding10.1016/j.jmatprotec.2009.06.018 ↗
15. Study of interface and base metal microstructures in explosive clad joint of Ti-5Ta-1.8Nb and 304L stainless steel10.1179/1362171810Y.0000000001 ↗
16. Reaction diffusion in αFe-βTi diffusion couples10.2320/jinstmet1952.40.8_844 ↗
17. Ternary diffusion and thermodynamic interaction in the β solid solutions of Ti-Al-Fe alloys at 1423 K10.1016/j.jallcom.2012.07.117 ↗
18. Growth kinetics of βTi solid solution in reaction diffusion10.2320/matertrans.44.83 ↗
19. A study of Ti/Fe contact reaction structures10.1179/026708304225012080 ↗
20. Phase relations and diffusion paths in the Ti-Ni-Fe system at 900°C10.1016/0022-5088(81)90014-X ↗
21. An experimental study and thermodynamic evaluation of the Fe-Ti-W system at 1000 °C10.1016/0956-716X(93)90542-Z ↗
22. The use of Kirkendall effect for calculating intrinsic diffusion coefficients in a 316L/Ti6242 diffusion bonded couple10.1016/S1359-6462(96)00414-9 ↗
23. Interdiffusion studies in titanium-304 stainless steel system10.1016/S0022-3115(98)00179-2 ↗
24. Metallography and microstructures, ASM handbook
25. The effect of intermetallics on the strength properties of diffusion bonds formed between Ti-5.5Al-2.4V and 304 stainless steel10.1016/S0921-5093(03)00649-X ↗
26. Material properties for process simulation10.1016/j.msea.2007.09.097 ↗
27. Prediction and confirmation of phases formed in the diffusion zone of Ti-5Ta-2Nb/304L SS explosive clads10.1007/s11661-015-2768-9 ↗
28. An analytical method of calculating variable diffusion coefficients10.1063/1.1698631 ↗
29. The evaluation of data obtained with diffusion couples of binary single phase and multi phase systems10.1016/0001-6160(69)90131-X ↗
30. Estimation of intrinsic diffusion coefficients in a pseudo binary diffusion couple10.1016/j.scriptamat.2015.02.027 ↗
31. Study of transformation behavior in a Ti-4.4Ta-1.9Nb alloy10.1016/j.msea.2004.08.035 ↗
32. Study of mechanical behavior and deformation mechanism in an α-β Ti-4.4Ta-1.9Nb alloy10.1016/j.msea.2006.11.028 ↗
33. Diffusion of iron in single crystal α-titanium10.1016/0036-9748(83)90370-8 ↗
34. Diffusion of solute elements in beta-titanium10.1016/0001-6160(62)90057-3 ↗
35. Diffusion of iron in βTi-Fe alloys10.1016/1359-6462(95)00617-6 ↗
36. Sra. F. Dyment, Autodiffusion de titanio Alfa10.1016/0001-6160(63)90115-9 ↗
37. Autodiffusion de titanio beta y hafnio beta10.1016/0001-6160(68)90010-2 ↗
38. Chr. Herzic, Tracer diffusion of titanium in α-Iron10.1002/pssa.2211480209 ↗
39. Application of the modified electrostatic model to impurity diffusion in γ iron10.4028/www.scientific.net/DDF.194-199.127 ↗
40. 1990 · 49
41. Assessment of mechanical property of Ti-5Ta-2Nb and 304L SS explosive clad and correlation with microstructure
42. Effect of dynamic strain aging on high temperature properties of austenitic stainless steel10.1016/j.msea.2004.03.004 ↗
43. Evaluation of high temperature tensile properties of Ti-6Al-4V using instrumented indentation testing10.1007/s12540-016-5619-3 ↗
44. Effect of phase transformation and intermetallic compounds on the microstructure and tensile strength properties of diffusion-bonded joints between Ti-6Al-4V and AISI 304L10.1016/j.matdes.2011.12.024 ↗
45. Strength of the diffusion bonded joints between cp-Ti and 304 stainless steel processed below and above β -transus10.2355/isijinternational.44.388 ↗
46. Raghavan · 1987 · 51
47. Diffusion bonding between commercially pure titanium and micro-duplex stainless steel10.1016/j.msea.2007.07.033 ↗
48. Beta titanium alloys in the 1990's
49. A review of metastable beta titanium alloys
50. Diffusion in intermetallics10.2320/matertrans1989.37.1259 ↗
51. An optimized diffusion database for the disordered and ordered bcc phases in the binary Fe-Ti system10.1016/j.calphad.2011.09.001 ↗
52. On the diffusion of aluminium and titanium in the Ni-rich Ni-Al-Ti system between 900 and 1200 °C10.1016/S1359-6454(00)00390-6 ↗
53. The role of Kirkendall porosity in determining β→δ transformation types in Nb-Ti-Al alloys10.1016/j.ijrmhm.2016.07.009 ↗