Novel method for construction of high performance nanocrystalline FeCuNbSiB toroidal core
Source abstract
Abstract
Abstract In the current study magnetic, magneto-optical and microstructural properties of the amorphous Fe 83 Cu 1 Nb 3 Si 5 B 8 alloy were properly investigated depending on the external treatments such as annealing and stress annealing. Kinetic nanocrystallization temperatures of certain ribbon were determined at the range of 500–510 °C. The amorphous ribbons produced in the as-spun state were subjected to tensile stress loading with and without rapid heat treatment of 510 °C during five seconds. Behaviors of certain ribbons were extensively investigated in terms of several factors such as magnetic properties, microstructural evaluation, magneto-optical effects and structural deformation by means of quasi-static hysteresis loops, XRD analyses, TEM micrographs, magneto-optical Kerr imaging and nanoindentation test. Present nanocrystalline Fe 83 Cu 1 Nb 3 Si 5 B 8 alloy have allowed yielding not only ultrafine grain structure of around 7.02 nm but also saturation induction of 1.85 T, coercivity of 5.8 A.m −1 and saturation magnetostriction of 6 ppm. Additionally, based upon determined optimum stress annealing circumstances, toroidal nanocrystalline core was produced using a proposed stress induced winding (SIW) system. SIW system based principally on the gradient of the rotational speed of each mandrel in the standard toroidal core winding machine. Structural deformation of the core was determined by an analysis method performed on the ribbon. Accordingly, induced elastic modulus ( E ), Poisson's ratio ( V ) and residual strain ( e ) in the ribbon under the influence of stress annealing by 200 MPa at 510 °C were found as 7.9 GPa, 0.39 and 0.031, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties and Applications · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. New Fe-based soft magnetic alloys composed of ultrafine grain structure10.1063/1.342149 ↗
2. Herzer · 1997 · 41510.1016/S1567-2719(97)10007-5 ↗
3. Present status of amorphous soft magnetic alloys10.1016/S0304-8853(00)00126-8 ↗
4. Nano-crystallization and magnetic softening in Fe-B binary alloys induced by ultra-rapid heating10.1088/1361-6463/aadad6 ↗
5. Nanocrystalline soft magnetic materials10.1016/0956-716X(95)00397-E ↗
6. FeSiBPCu nanocrystalline soft magnetic alloys with high Bs of 1.9 Tesla produced by crystallizing hetero-amorphous phase10.2320/matertrans.MER2008306 ↗
7. Performance of a prototype power transformer constructed by nanocrystalline Fe-Co-Si-B-P-Cu soft magnetic alloys10.1063/1.4919041 ↗
8. Domain observation on nanocrystalline material10.1063/1.348067 ↗
9. Creep induced magnetic anisotropy in nanocrystalline Fe-Cu-Nb-Si-B alloys10.1109/20.334226 ↗
10. Creep induced magnetic anisotropy in nanocrystalline Fe73.5Cu1Nb3Si13.5B910.1016/0965-9773(95)00220-0 ↗
11. Interplay of uniform and random anisotropy in nanocrystalline soft magnetic alloys10.1016/j.actamat.2005.03.008 ↗
12. Magnetization loss and domain refinement in nanocrystalline tape wound cores10.1016/j.actamat.2006.04.040 ↗
13. Stress annealing in Fe73.5Cu1Ta3Si13.5B9 amorphous alloy: induced Magnetic anisotropy and variation of the magnetostriction constant10.1063/1.357834 ↗
14. Influence of rapid stress annealing on magnetic and structural properties of nanocrystalline Fe74.5Cu1Nb3Si15.5B6 alloy10.1016/j.jmmm.2005.03.071 ↗
15. Magnetic properties of FeCuNbSiB nanocrystallized by flash annealing under high tensile stress10.1002/pssb.201147088 ↗
16. The effect of heat treatment and cyclic loading on nanoindentation behavior of FeSiB amorphous alloy10.1016/j.matdes.2015.12.136 ↗
17. Anomalous grain growth in nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloys10.1016/S0965-9773(97)90064-7 ↗
18. Hubert · 1998 · vol. 446 · 547
19. Stripe domains on amorphous ribbons10.1109/20.539159 ↗
20. Measurement of saturation magnetostriction of a thin amorphous ribbon by means of small-angle magnetization rotation10.1109/TMAG.1980.1060610 ↗
21. Microstructure evolution and grain size distribution in nanocrystalline FeNbBCu from synchrotron XRD and TEM analysis10.1016/j.jnoncrysol.2011.09.003 ↗
22. Quantitative analysis of magnetic field distribution around circular non-magnetic region in grain-oriented Fe-3% Si steel10.1109/TMAG.2017.2755583 ↗
23. Schäfer · 2009 · 277
24. Effect of heat treatment on dynamic magnetic properties and microstructures of Fe73.5Cu1Nb3Si13.5B9 nanocrystalline alloy10.1007/s10854-017-6381-0 ↗
25. Herzer · NATO Sci. II Math. Phys. Chem. · 2005 · 184 · 15
26. Magnetic microstructures of nanocrystalline FeCuNbSiB soft magnets10.1016/j.jnoncrysol.2008.07.034 ↗
27. Grain size dependence of tensile properties in nanocrystalline diamond10.1016/j.commatsci.2018.10.027 ↗
28. Effects of strain rate and annealing temperature on tensile properties of nanocrystalline diamond10.1016/j.carbon.2018.04.052 ↗
29. Numerical study of the grain-size dependent Young's modulus and Poisson's ratio of bulk nanocrystalline materials10.1016/j.ijsolstr.2012.08.023 ↗