Effect of laser surface melting on bulk metallic glass: Investigation of microstructure, microhardness, friction and wear properties
Source abstract
Abstract
Abstract 10 × 3 × 80 mm3 fully dense crack-free plate-like Cu46Zr42Al7Y5 bulk metallic glass (BMG) samples were successfully prepared by a copper mold casting method in an argon atmosphere and subjected to surface laser surface melting (LSM) under different laser frequencies. X-ray diffraction patterns showed that the degree of crystallization is determined by the crystalline phase in the heat-affected zone and the welding fusion zone; the heat-affected zone is easier to crystallize than the welding fusion zone at the same laser frequency. The microhardness of the welding fusion zones reached a maximum of 508.2 Hv at a laser frequency of 16 Hz. However, the microhardness of the heat-affected zone declined drastically with increasing laser frequency. In addition, the average frictional coefficient dramatically increased and then decreased with an increase in sliding velocity, and the values reached a maximum at the sliding velocity of 500 mm/min. The property of wear resistance was moderately improved at laser frequencies of 12, 14, and 16 Hz. Moreover, the grinding trace widths slightly increased with increasing sliding velocity. The friction and wear mechanisms and morphological representations were completely different under different sliding velocities.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Laser Material Processing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Bulk metallic glasses10.1016/j.mser.2004.03.001 ↗
2. Cu-Zr nanoglasses: atomic structure, thermal stability and indentation properties10.1016/j.actamat.2017.07.001 ↗
3. Thermal and structural stability of Zr–based amorphous thin films for potential application in hydrogen purification10.1016/j.seppur.2017.06.052 ↗
4. Long-range topological order in metallic glass10.1126/science.1200324 ↗
5. High-throughput discovery and characterization of multicomponent bulk metallic glass alloys10.1016/j.actamat.2016.08.068 ↗
6. Effect of cast temperature, size and annealing condition on the serrated flow during nano-indentation of Zr-based bulk metallic glasses10.1016/j.jallcom.2016.09.033 ↗
7. Effect of transition metal elements (Cu, Ni, Co and Fe) on the mechanical properties of Ti-based bulk metallic glass composites10.1016/j.jallcom.2016.09.280 ↗
8. Selective laser melting of Zr-based bulk metallic glasses: processing, microstructure and mechanical properties10.1016/j.matdes.2016.09.071 ↗
9. Research on friction and wear behavior of a bulk metallic glass under different sliding velocity10.1016/j.matlet.2015.03.075 ↗
10. Pulsed laser beam welding of Pd43Cu27Ni10P20 bulk metallic glass10.1038/s41598-017-08460-6 ↗
11. Enhanced wear resistance in Zr-based bulk metallic glasses by hydrogen10.1016/j.ijhydene.2013.05.001 ↗
12. Ewing · 2013
13. Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – a review article10.1016/j.jallcom.2017.04.231 ↗
14. Laser processing of bulk metallic glass: a review10.1016/j.jmatprotec.2017.03.034 ↗
15. Tailoring residual stress to achieve large plasticity in Zr55Al10Ni5Cu30, bulk metallic glass10.1016/j.jallcom.2016.08.075 ↗
16. Evolution of residual stress, free volume, and hardness in the laser shock peened Ti-based metallic glass10.1016/j.matdes.2016.09.017 ↗
17. Microstructure and property of Fe–Co–B–Si–C–Nb amorphous composite coating fabricated by laser cladding process10.1016/j.apsusc.2013.04.077 ↗
18. A new procedure for refurbishment of power plant Superalloy 617 by pulsed Nd:YAG laser process10.1016/j.optlastec.2016.12.013 ↗
19. Microstructure evolution in Nd:YAG laser-welded bulk metallic glass alloy10.1016/j.jallcom.2010.01.132 ↗
20. Size-dependent enhancement of plasticity by laser surface melting in Zr55Al10Ni5Cu30 bulk metallic glass10.1016/j.jallcom.2015.10.221 ↗
21. Molecular dynamics simulation on the micro-structural evolution in heat-affected zone during the preparation of bulk metallic glasses with selective laser melting10.1016/j.jallcom.2016.11.393 ↗
22. Selective laser melting of Zr-based bulk metallic glasses: processing, microstructure and mechanical properties10.1016/j.matdes.2016.09.071 ↗
23. Laser welding of annealed Zr55Cu30Ni5Al10 bulk metallic glass10.1016/j.intermet.2013.11.008 ↗
24. Influence of powder size on the crystallization behavior during laser solid forming Zr55Cu30Al10Ni5 bulk amorphous alloy10.1016/j.intermet.2016.06.006 ↗
25. The effect of high energy concentration source irradiation on structure and properties of Fe-based bulk metallic glass10.1016/j.apsusc.2015.12.136 ↗
26. The evolution of microstructures and the properties of bulk metallic glass with consubstantial composition laser welding10.3390/met6100233 ↗
27. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
28. Cu-based bulk amorphous alloy with larger glass-forming ability and supercooled liquid region10.1016/j.jallcom.2007.03.114 ↗
29. Phase evolution in Cu54Ni6Zr22Ti18 bulk metallic glass Nd: YAG laser weld10.1016/j.msea.2006.06.118 ↗
30. Laser welding of Zr45Cu48Al7 bulk glassy alloy10.1016/j.jallcom.2005.07.005 ↗
31. Microstructure evolution of the laser spot welded Ni-free Zr-based bulk metallic glass composites10.1016/j.intermet.2012.05.013 ↗
32. Designing ductile CuZr-based metallic glass matrix composites10.1016/j.msea.2016.11.079 ↗
33. Formation of Cu–Zr–Al bulk metallic glass composites with improved tensile properties10.1016/j.actamat.2011.01.029 ↗
34. Microstructural heterogeneities governing the deformation of Cu47.5Zr47.5Al5 bulk metallic glass composites10.1016/j.actamat.2009.07.042 ↗
35. Evolution of residual stress, free volume, and hardness in the laser shock peened Ti-based metallic glass10.1016/j.matdes.2016.09.017 ↗
36. Evolution of shear bands, free volume and hardness during cold rolling of a Zr-based bulk metallic glass10.1016/j.actamat.2013.10.035 ↗
37. Correlation between enthalpy change and free volume reduction during structural relaxation of Zr55Cu30Al10Ni5 metallic glass10.1016/j.scriptamat.2003.09.038 ↗
38. Tribological and mechanical properties of high power laser surface-treated metallic glasses10.1016/j.msea.2007.02.119 ↗
39. Laser surface coating of Fe–Cr–Mo–Y–B–C bulk metallic glass composition on AISI 4140 steel10.1016/j.surfcoat.2007.09.028 ↗
40. Dowson · 1977