Non-hydrolytic sol-gel processing of chloride precursors loaded at forsterite stoichiometry
Source abstract
Abstract
This paper for the first time investigates the sol-gel reaction of magnesium chloride and silicon tetrachloride, directed at the forsterite (Mg 2SiO 4 ) stoichiometry, using dry ethanol and glacial acetic acid as the solvent and chelating agent, respectively. The synthesized particles before and after calcination were characterized by transmission electron microscopy equipped with energy-dispersive X-ray spectroscopy mapping, X-ray diffraction and Fourier transform infrared spectroscopy. According to the results, the calcined nanoparticles showed a magnesia/forsterite structure along with silicon depletion, despite loading the forsterite stoichiometry. On the other hand, silicon-acetoxy bonds were detected in the xerogel (before calcination) as a result of the chelation reaction, albeit with a relatively uniform distribution of the essential elements. Since no non-alcoholyzed silicon-chlorine bond was detected in the xerogel, the development of the calcined structure was explained by the deficient sol-gel condensation and subsequent evaporation of silicon tetraacetate. It was inferred that the excessive amount of hydrogen chloride as the coproduct of the ethanolysis and chelation reactions of the precursors inhibits the condensation step, as confirmed by a supplementary test in an exaggerated circumstance. In conclusion, the silicon-containing species acts like a limiting reagent in the sol-gel condensation of forsterite using the chloride precursors and acetic acid chelator, in spite of loading the related stoichiometry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Layered Double Hydroxides Synthesis and Applications · Magnesium Oxide Properties and Applications · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Preparation and characterisation of forsterite (Mg2 SiO4) aerogels10.1016/S0022-3093(98)00017-9 ↗
2. Nanocrystalline forsterite for biomedical applications: synthesis, microstructure and mechanical properties10.1016/j.jmbbm.2013.05.008 ↗
3. Improvement of mechanical properties and biocompatibility of forsterite bioceramic addressed to bone tissue engineering materials10.1016/j.jmbbm.2010.06.003 ↗
4. Nanostructure effects on the bioactivity of forsterite bioceramic10.1016/j.matlet.2010.11.014 ↗
5. Effects of hydrolysis processing on the character of forsterite gel fibers. Part II: crystallites and microstructural evolutions10.1016/S0955-2219(01)00418-6 ↗
6. Characterization of nanocrystalline forsterite fiber synthesized via the sol–gel process10.1111/j.1151-2916.2002.tb00110.x ↗
7. Effects of hydrolysis processing on the character of forsterite gel fibers. Part I: preparation, spinnability and molecular structure10.1016/S0955-2219(01)00417-4 ↗
8. Hydrolysis and condensation of forsterite precursor alkoxides: modification of the molecular gel structure by acetic acid10.1016/S0022-3093(02)00918-3 ↗
9. Synthesis of nanocrystalline forsterite fiber via a chemical route10.1016/S0025-5408(02)00926-1 ↗
10. Preparation of forsterite (Mg2SiO4) powders via an aqueous route using magnesium salts and silicon tetrachloride (SiCl4)10.1023/A:1008732808079 ↗
11. Aqueous sol–gel synthesis of zirconium titanate (ZrTiO 4) nanoparticles using chloride precursors10.1016/j.ceramint.2012.04.064 ↗
12. Surface modification of stainless steel orthopedic implants by sol–gel ZrTiO4 and ZrTiO4–PMMA coatings10.1166/jbn.2013.1619 ↗
13. Multilayer bioactive glass/zirconium titanate thin films in bone tissue engineering and regenerative dentistry10.2147/IJN.S42659 ↗
14. Nanostructured zirconium titanate fibers prepared by particulate sol–gel and cellulose templating techniques10.1016/j.jallcom.2013.03.142 ↗
15. Multilayer zirconium titanate thin films prepared by a sol–gel deposition method10.1016/j.ceramint.2012.07.058 ↗
16. A new double-layer sol–gel coating to improve the corrosion resistance of a medical-grade stainless steel in a simulated body fluid10.1016/j.matlet.2013.01.111 ↗
17. Zirconium titanate thin film prepared by an aqueous particulate sol–gel spin coating process using carboxymethyl cellulose as dispersant10.1016/j.matlet.2012.08.013 ↗
18. Influence of annealing temperature on the structural and anti-corrosion characteristics of sol–gel derived, spin-coated thin films10.1016/j.ceramint.2013.10.023 ↗
19. Effect of precursor solution pH on the structural and crystallization characteristics of sol–gel derived nanoparticles10.1016/j.jallcom.2013.11.178 ↗
20. Innovative surface modification of orthopaedic implants with positive effects on wettability and in vitro anti-corrosion performance10.1179/1743294414Y.0000000309 ↗
21. Low-temperature sol–gel synthesis of crystalline materials10.1039/C4RA04454A ↗
22. Brinker · 2013
23. A FT-IR study of the hydrolysis of tetraethylorthosilicate (TEOS)10.1080/00387019808006772 ↗
24. Preparation and in-vitro evaluation of controlled release metformin hcl matrix tablet and immediate release pioglitazone hcl bilayer tablets for treatment for type-ii diabetes
25. High-quartz solid-solution phases from xerogels with composition 2MgO. 2Al2O3. 5SiO2 (μ-cordierite) and Li2O. Al 2O3. nSiO2 (n= 2 to 4)(β-eucryptite): characterization by XRD, FTIR and surface measurements10.1016/0955-2219(93)90029-Q ↗
26. Synthesis of hierarchical structured MgO by sol-gel method
27. Preparation of cordierite glass by the sol-gel process10.1007/BF00544508 ↗
28. Infrared analysis of organosilicon compounds: spectra-structure correlations
29. Silicon tetraacetate as a sol-gel precursor10.1007/BF00486714 ↗
30. Preparation and crystallization of forsterite fibrous gels10.1016/S0955-2219(02)00305-9 ↗
31. Effect of the conditions of hydrolysis of tetraethoxysilane on the synthesis of forsterite10.1007/s10717-009-9101-2 ↗