Effect of the synergistic effect of Cr and Mo on the solidification microstructure and mechanical properties of NiAl-based high-entropy alloys
Source abstract
Abstract
To balance the strength and toughness of NiAl-based alloys by coupling multiple strengthening mechanisms, two novel high-entropy alloys (HEAs), Ni 0.35Al 0.3 (CoFe) 0.2Cr 0.15-xMo x (x=0,0.05), were prepared, and their mechanical properties were explored. First, the addition of Mo induces the shape of the precipitate to change from spherical to acicular. Ni 0.35Al 0.3(CoFe) 0.2Cr 0.1Mo 0.05 has excellent high-temperature mechanical properties. Foremost, the strength is better than that of most Ni-based superalloys, Co-based superalloys and Ni-Co-based superalloys at 873 K. Notably, its yield strength is greater than 1400 MPa. When the temperature reaches 1123 K, the yield strength is still greater than 600 MPa. Moreover, the acicular precipitated phase maintains a co-lattice relationship with the matrix. The synergistic effect of solid solution strengthening and precipitation strengthening significantly enhances the strain hardening ability of the Ni 0.35Al 0.3 (CoFe) 0.2Cr 0.1Mo 0.05 alloy.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. High-throughput mapping method for mechanical properties, oxidation resistance, and phase stability in Ni-based super alloys using composition-graded unidirectional solidified alloys10.1016/j.scriptamat.2020.10.043 ↗
2. Study of microstructure of nickel-based superalloys at high temperatures10.1016/j.scriptamat.2016.08.013 ↗
3. Enhanced compression ductility of stoichiometric NiAl at room temperature by Y and Cu c-Co-addition10.1007/s12613-012-0562-x ↗
4. Advances in processing of NiAl intermetallic alloys and composites for high temperature aerospace applications10.1016/j.paerosci.2015.09.003 ↗
5. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
6. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
7. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
8. Cooperative deformation in high-entropy alloys at ultralow temperatures10.1126/sciadv.aax4002 ↗
9. Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures10.1038/s41467-020-20109-z ↗
10. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
11. Effect of deformation induced B2 precipitates on the microstructure and mechanical property of Al0.3CoCrFeNi high-entropy alloy10.1016/j.jallcom.2019.153445 ↗
12. Spinodal decomposition, ordering, and precipitation transformation in CoCrFeNiAl HEAs under GPa pressure10.1016/j.jmrt.2023.12.191 ↗
13. Tuning element distribution structure and properties by composition in high-entropy alloys10.1038/s41586-019-1617-1 ↗
14. High strength and ductility high-entropy intermetallic matrix composites reinforced with in-situ hierarchical TiB2 particles10.1016/j.compositesb.2024.111556 ↗
15. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
16. A new infinite solid solution strategy to design eutectic high entropy alloys with B2 and BCC structure10.1016/j.scriptamat.2021.113886 ↗
17. Achieving a balance between mechanical properties at room and elevated temperatures of lightweight NiAlFeCrMoV high-entropy alloy10.1016/j.ijrmhm.2023.106243 ↗
18. Advancing strength and counteracting embrittlement by displacive transformation in heterogeneous high-entropy alloys containing sigma phase10.1016/j.actamat.2023.118717 ↗
19. A ductile high entropy alloy strengthened by nano sigma phase10.1016/j.intermet.2020.106813 ↗
20. Multicomponent Ni-rich high-entropy alloy toughened with irregular-shaped precipitates and serrated grain boundaries10.1016/j.scriptamat.2021.114066 ↗
21. Microstructure and mechanical property of novel NiAl-based hypoeutectic eutectic/hypereutectic high-entropy alloy10.1016/j.intermet.2022.107476 ↗
22. Effects of Ti addition and heat treatment on the microstructure and mechanical properties of NiAl-Cr (Mo) hypereutectic alloy10.1016/j.jmrt.2022.07.057 ↗
23. Effect of directionally solidified microstructures on the room-temperature fracture toughness properties of Ni-33Al-33Cr-1Mo and Ni-33Al-31Cr-3Mo eutectic alloys grown at different solidification rates10.1007/s11661-002-0122-5 ↗
24. Effect of molybdenum on phases microstructure and mechanical properties of Al0.5CoCrFeMoxNi high entropy alloys10.1016/j.jallcom.2018.02.003 ↗
25. Tuning heterogeneous precipitation behavior in Ni35Al35Co5Cr20Cu5 HEAs under 7 GPa high pressure10.1016/j.vacuum.2023.112755 ↗
26. Strength plasticity and coercivity trade off in soft magnetic high-entropy alloys by multiple coherent interfaces10.1016/j.actamat.2023.118970 ↗
27. Precipitation and micromechanical behavior of the coherent ordered nanoprecipitation strengthened Al-Cr-Fe-Ni-V high entropy alloy10.1016/j.actamat.2021.117121 ↗
28. Neutron-diffraction study and modelling of the lattice parameters of a NiAl-precipitate-strengthened Fe-based alloy10.1016/j.actamat.2012.05.033 ↗
29. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
30. Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy10.1016/j.actamat.2013.09.042 ↗
31. Hosford · 2005
32. On the critical resolved shear stress of solid solutions containing coherent precipitates10.1002/pssb.19660160234 ↗
33. Argon · 2007
34. On the critical resolved shear stress from misfitting particles10.1016/0036-9748(78)90194-1 ↗
35. Ab initio calculations of elastic constants and thermodynamic properties of NiAl under high pressures10.1016/j.commatsci.2008.05.026 ↗
36. Effect of antiphase boundaries on the electronic structure and bonding character of intermetallic systems: NiAl10.1103/PhysRevB.43.6446 ↗
37. Effect of Ag alloying on microstructure, mechanical and electrical properties of NiAl intermetallic compound10.1016/S0921-5093(02)00123-5 ↗
38. A new class of high strength high temperature Cobalt based γ–γ′ Co–Mo–Al alloys stabilized with Ta addition10.1016/j.actamat.2015.06.034 ↗
39. Microstructure, interface and mechanical property of the DS NiAl/Cr (Mo, Hf) composite10.1016/S0966-9795(01)00009-7 ↗
40. Microstructural verification of the theoretically predicted morphologies of the NiAl-Cr pseudo-binary alloy systems and NiAl-Cr eutectic structure modification by Mo addition10.1007/s42452-019-1338-y ↗
41. Characteristic of a NiAl eutectic alloy JJ-3 with excellent properties10.3724/SP.J.1037.2013.00472 ↗
42. Influence of Ho and Hf on the microstructure and mechanical properties of NiAl and NiAl-Cr(Mo) eutectic alloy10.1088/2053-1591/aaf8ea ↗
43. Development of Co-Ni-Al-V-Ta-Cr-based superalloys with high-temperature strength and excellent oxidation resistance10.1016/j.jmrt.2023.11.217 ↗
44. Synergistic effect of multimodal γ' precipitates tuned through Ti addition on phase stability and strength of Co-Ni based superalloy10.1016/j.scriptamat.2022.115105 ↗
45. Flow stress anomalies in γ/γ′ two-phase Co-Al-W-base alloys10.1016/j.scriptamat.2006.10.039 ↗
46. Solutioning and aging of Mar-M247 nickel-based superalloy10.1007/s11665-013-0565-4 ↗